LAISHA
Open Laisha

CUET-UG (ICAR 20% All-India Quota) for B.Tech Agricultural Engineering

India · National Testing Agency · secondary source

151practice questions written to this syllabus
5subjects

What CUET-UG for B.Tech Agricultural Engineering is

CUET-UG (ICAR 20% All-India Quota) for B.Tech Agricultural Engineering is a university entrance exam run by National Testing Agency, for candidates in India.

Format

CUET-UG domain tests; the exact subject combination for B.Tech Agricultural Engineering was not verified.

Sections

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.

Check the current format, eligibility, fees and dates on the official site: exams.nta.ac.in.

How it has changed

ICAR AIEEA-UG was discontinued from 2023-24 and replaced by CUET-UG. State seats go through state entrance tests, which were not checked.

How to prepare for CUET-UG for B.Tech Agricultural Engineering

Where our 151 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (81% of the questions): Engineering Physics & Chemistry (89); Basic Electrical & Electronics Engineering (33).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Engineering Thermodynamics (16); Engineering Mathematics (10).

    One pass per subject, then mixed sets across them.

  3. Lighter: Hydraulic Drives & Controls (3).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Engineering Physics & Chemistry (21 hard of 89), Basic Electrical & Electronics Engineering (1 hard of 33).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: exams.nta.ac.in

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. What is the binary number 10110110 in decimal and hexadecimal?

  1. 182 and B6
  2. 109 and 6D
  3. 182 and C6
  4. 181 and B5
Answer and working

A. 182 and B6

128 + 32 + 16 + 4 + 2 = 182; grouping in fours, 1011 = B and 0110 = 6, so B6. 109 and 6D read the bits in reverse order; C6 mis-groups the upper nibble; 181 and B5 are off by one.

Basic Electrical & Electronics Engineering · Digital logic

2. Which statement correctly distinguishes a thermoplastic from a thermoset?

  1. A thermoplastic softens on reheating; a thermoset is cross-linked and does not
  2. A thermoset softens on reheating; a thermoplastic is cross-linked and does not
  3. A thermoplastic is always made by condensation; a thermoset by addition only
  4. A thermoset is always transparent; a thermoplastic is always black or opaque
Answer and working

A. A thermoplastic softens on reheating; a thermoset is cross-linked and does not

Thermoplastics are linear or branched chains held by weak forces and can be re-melted and re-moulded; thermosets cure into a cross-linked network that chars rather than melts. Either type can be made by addition or condensation, and colour has nothing to do with the classification.

Engineering Physics & Chemistry · Polymers and plastics used in agriculture

3. A single-phase transformer steps 6600 V down to 220 V. The primary has 1500 turns. How many turns does the secondary have?

  1. 150
  2. 50
  3. 300
  4. 45 000
Answer and working

B. 50

N₂ = N₁ × V₂/V₁ = 1500 × 220/6600 = 50 turns. 45 000 multiplies by the inverse ratio; 150 and 300 are arithmetic slips.

Basic Electrical & Electronics Engineering · Transformers

4. A well water contains, per litre, 162 mg Ca(HCO3)2, 120 mg MgSO4, 111 mg CaCl2 and 58.5 mg NaCl. What are its temporary and permanent hardness, as mg/L CaCO3?

  1. Temporary 162, permanent 231
  2. Temporary 100, permanent 250
  3. Temporary 100, permanent 200
  4. Temporary 200, permanent 100
Answer and working

C. Temporary 100, permanent 200

Convert with mass × 50/equivalent weight: Ca(HCO3)2 162 × 50/81 = 100 (temporary); MgSO4 120 × 50/60 = 100 and CaCl2 111 × 50/55.5 = 100 (permanent, total 200). NaCl causes no hardness, so adding 50 for it is wrong; 162 and 231 are raw salt masses, not CaCO3 equivalents.

Engineering Physics & Chemistry · Water chemistry: hardness, pH and treatment

5. The internal energy of an ideal gas depends on

  1. temperature only
  2. pressure only
  3. pressure and volume together
  4. volume only
Answer and working

A. temperature only

Joule's free-expansion experiment showed no temperature change when a low-pressure gas expanded into a vacuum, so u of an ideal gas is a function of temperature alone. Pressure and volume can change at constant u provided T is unchanged.

Engineering Thermodynamics · First law of thermodynamics

6. A liquid fuel contains 84% carbon and 16% hydrogen by mass. Taking air as 23% oxygen by mass, what is the minimum (stoichiometric) mass of air per kg of fuel?

  1. 12.5 kg
  2. 16.8 kg
  3. 3.52 kg
  4. 15.3 kg
Answer and working

D. 15.3 kg

O2 = (32/12)(0.84) + 8(0.16) = 2.24 + 1.28 = 3.52 kg; air = 3.52/0.23 = 15.3 kg. 3.52 kg is the oxygen alone; dividing by 0.21 uses the volume fraction with a mass basis; 12.5 kg uses 4 instead of 8 kg O2 per kg H. Dividing by 0.21 gives 16.8 kg.

Engineering Physics & Chemistry · Fuels and combustion chemistry

7. Why do greenhouse films and outdoor HDPE pipes contain UV stabilisers or carbon black?

  1. UV stabilisers are added to make the greenhouse film block all photosynthetic light
  2. Ultraviolet light breaks polymer chains, making plastic brittle unless protected
  3. Carbon black is added only to make the plastic conduct static electricity safely to the ground
  4. Ultraviolet light makes polyethylene absorb rainwater and swell until the film or pipe bursts
Answer and working

B. Ultraviolet light breaks polymer chains, making plastic brittle unless protected

UV photons have enough energy to break bonds and start photo-oxidation, so unprotected polyolefins crack and embrittle; hindered-amine stabilisers, UV absorbers and carbon black slow this. A greenhouse film must still transmit photosynthetically active light, so stabilisers are not added to block it.

Engineering Physics & Chemistry · Polymers and plastics used in agriculture

8. A biogas-fired water heater burns pure methane with 20% excess air. How much air is supplied per m³ of methane (same temperature and pressure; air 21% O2 by volume)?

  1. 11.43 m³
  2. 9.72 m³
  3. 9.52 m³
  4. 2.40 m³
Answer and working

A. 11.43 m³

Theoretical air = 2/0.21 = 9.52 m³; with 20% excess, actual = 1.2 × 9.52 = 11.43 m³. 9.52 m³ omits the excess; adding 0.2 m³ treats 20% as an absolute amount; 2.40 m³ is the total oxygen supplied, not air. Adding 0.2 m³ gives 9.72 m³.

Engineering Physics & Chemistry · Fuels and combustion chemistry

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 151 questions — CUET-UG (ICAR 20% All-India Quota) for B.Tech Agricultural Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.