Japan · Institution of Professional Engineers, Japan (IPEJ)
Japan Professional Engineer (技術士) Second-stage Exam — Agriculture division is a licensing and registration exam run by Institution of Professional Engineers, Japan (IPEJ), for candidates in Japan.
Written (not multiple choice): compulsory paper 2 h (40 marks), elective papers 3.5 h (30 + 30 marks), then a 20-minute oral. 4–7 years' experience required.
Options revised from 2019. There is no stand-alone farm-machinery option: Japan examines agricultural engineering as rural and irrigation civil engineering. Past papers are free to read but not openly licensed.
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
One pass per subject, then mixed sets across them.
Leave untimed time for these and read every explanation, including for the options you rejected.
Official source: engineer.or.jp
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. Which group of weeds is generally hardest to control with grass herbicides used in rice and wheat?
B. Sedges such as Cyperus species
Sedges differ botanically from grasses (triangular stems, often tubers) and are not controlled by most grass-specific herbicides. Echinochloa, Phalaris minor and wild oats are grasses targeted by those products.
Crop Production & Protection for Engineers · Weed management
2. A sprayer calibrated at 6 km/h delivers 150 L/ha. The operator drives at 8 km/h without changing nozzles or pressure. What is the actual application rate, and what happens to the dose of a.i. if the tank mix was made for 150 L/ha?
D. 112.5 L/ha, and the a.i. dose falls by 25 %
Rate ∝ 1/speed at constant flow: 150 × 6 ÷ 8 = 112.5 L/ha. The tank concentration is fixed, so a.i. per hectare also falls to 75 % of target. 200 L/ha inverts the speed ratio; a fixed-pressure sprayer without rate control does not compensate; and with a fixed concentration, a.i. dose falls in step with volume.
Crop Production & Protection for Engineers · Pest and disease management and application rates
3. Which practice is a cultural method of pest management rather than a chemical or biological one?
B. Adjusting the sowing date so the susceptible crop stage avoids peak pest flight
Changing sowing date is a cultural method. Trichogramma releases and NPV sprays are biological controls; seed treatment with an insecticide is chemical control.
Crop Production & Protection for Engineers · Pest and disease management and application rates
4. The 'disease triangle' states that a plant disease develops only when three things coincide. They are:
C. A susceptible host, a virulent pathogen and a favourable environment
Disease needs host, pathogen and environment together; removing any one prevents it. Vectors matter only for some diseases; fungicides are control measures; nitrogen and sowing date can modify disease but are not the triangle.
Crop Production & Protection for Engineers · Pest and disease management and application rates
5. A pest density of 8 larvae per plant causes damage worth exactly the cost of spraying. Field scouting shows 5 larvae per plant and rising. Which statement is consistent with IPM?
D. 8 per plant is the EIL; spraying is justified once counts reach the lower ETL, set to act before 8 is reached
The density at which damage equals control cost is the economic injury level. The economic threshold is set below it so that control acts before the EIL is reached; with counts rising, action at the ETL is justified. Waiting beyond 8 lets damage become uneconomic; IPM does not aim for zero; and 5 is below the EIL by definition.
Crop Production & Protection for Engineers · Pest and disease management and application rates
6. To double the flow from a hydraulic nozzle while keeping the same nozzle, the operating pressure must be increased by a factor of about:
C. 4
Nozzle flow is proportional to the square root of pressure, so doubling flow needs 2² = 4 times the pressure. 2 assumes flow is proportional to pressure; 1.41 is the flow gain from doubling pressure; 8 cubes the ratio.
Crop Production & Protection for Engineers · Pest and disease management and application rates
7. How much of a 25 % EC insecticide is needed to prepare 1,000 L of a 0.1 % a.i. spray?
C. 4 L
Product volume = spray volume × desired % ÷ product % = 1,000 × 0.1 ÷ 25 = 4 L. 2.5 L multiplies 0.1 × 25; 25 L and 0.4 L are factor-of-ten slips.
Crop Production & Protection for Engineers · Pest and disease management and application rates
8. The critical period of crop–weed competition is best defined as:
A. The part of the crop's life during which weeds must be controlled to avoid unacceptable yield loss
The critical period is the window, often within the first third to half of crop life, when weed presence causes yield loss; weeds before it can be tolerated and those emerging after it do little damage. Weed effects are not equal throughout the season; post-harvest seed shed matters for the seed bank but is not this period; and herbicide timing aims at susceptible, not tolerant, stages.
Crop Production & Protection for Engineers · Weed management
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.