Japan · Institution of Professional Engineers, Japan (IPEJ)
Japan Professional Engineer (技術士) First-stage Exam — Agriculture division is a licensing and registration exam run by Institution of Professional Engineers, Japan (IPEJ), for candidates in Japan.
Five-option multiple choice on mark sheet: basic science 1 h (15 of 30), aptitude/ethics 1 h (15 questions), specialist 2 h (25 of 35, 50 marks). No eligibility limits.
Leads to Associate Professional Engineer (技術士補). Pass line not verified. The 2026 date shown was 22 Nov 2026; recheck.
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
One pass per subject, then mixed sets across them.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Leave untimed time for these and read every explanation, including for the options you rejected.
Official source: engineer.or.jp
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. Weed-free plots yield 4.8 t/ha and a herbicide treatment yields 4.2 t/ha. What is the weed index of the treatment?
A. 12.5 %
Weed index = (4.8 − 4.2) ÷ 4.8 × 100 = 12.5 %. 14.3 % divides by the treatment yield instead of the weed-free yield; 87.5 % is the treatment yield as a share of weed-free yield; 0.6 is the yield gap in t/ha, not a percentage.
Crop Production & Protection for Engineers · Weed management
2. A farmer irrigates a prepared field, lets the first flush of weeds emerge, kills them with a shallow pass or a non-selective herbicide, and then sows. This practice is called:
C. A stale seedbed
The stale seedbed technique depletes the surface weed seed bank before sowing. Solarisation heats moist soil under clear plastic; smother cropping uses a competitive crop to suppress weeds; allelopathic mulching relies on chemicals released by residue.
Crop Production & Protection for Engineers · Weed management
3. The pre-harvest interval on a pesticide label is:
B. The minimum time between the last application and harvest of the crop
The PHI ensures residues fall below the maximum residue limit by harvest. Equipment cleaning, pre-plant soil timing and shelf life are separate label items.
Crop Production & Protection for Engineers · Pest and disease management and application rates
4. In an experiment, weed dry matter is 240 g/m² in the unweeded control and 36 g/m² in a herbicide treatment. What is the weed control efficiency?
A. 85 %
WCE = (240 − 36) ÷ 240 × 100 = 85 %. 15 % is the share of weeds remaining (36 ÷ 240); 567 % divides the reduction by the treated value (204 ÷ 36); 118 % inverts the formula (240 ÷ 204).
Crop Production & Protection for Engineers · Weed management
5. A fungicide is recommended at 0.75 kg a.i./ha. The product contains 500 g a.i. per litre and the sprayer applies 300 L/ha from a 400 L tank. How much product goes into each full tank?
C. 2.0 L
Product per ha = 0.75 ÷ 0.5 = 1.5 L. One tank covers 400 ÷ 300 = 1.333 ha, so product per tank = 1.5 × 1.333 = 2.0 L. 1.5 L is the per-hectare amount; 1.1 L scales by 300/400 instead of 400/300; 1.0 L treats the 0.75 kg a.i. dose as if it were litres of product (0.75 × 1.333).
Crop Production & Protection for Engineers · Pest and disease management and application rates
6. A tractor engine oil is described as having a high viscosity index. What does this tell the user?
B. Its viscosity changes relatively little between cold starts and hot running
Viscosity index measures how much viscosity changes with temperature; a high value means the oil thins less when hot and thickens less when cold. It says nothing directly about thickness at one temperature, about flash point, or about pour point, which are separate tests.
Engineering Physics & Chemistry · Fuels and combustion chemistry
7. An engineer working abroad finds that a local rule permits guards to be omitted from threshers, which would be illegal in her home country. Her employer proposes to omit them. What does professional ethics require?
C. Require guards anyway, treating the local law merely as the bare minimum
Local law sets the minimum. An engineer remains bound by the code of the body that registered her, which puts public safety first, so a legal but dangerous practice is still unacceptable. Verbal warnings do not replace guarding, which ranks above warnings in the safety hierarchy.
Professional Practice, Ethics & Laws · Codes of ethics for engineers
8. Atrazine, used pre-emergence in maize and sorghum, kills susceptible weeds by:
A. Inhibiting photosynthesis at photosystem II
Atrazine, a triazine, binds in photosystem II and blocks electron transport. EPSPS inhibition is glyphosate; synthetic auxin is 2,4-D and MCPA; ACCase inhibition is the grass herbicides such as clodinafop.
Crop Production & Protection for Engineers · Weed management
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.