LAISHA
Open Laisha

CUET (ICAR-UG): admission to B.Tech Dairy Technology

India · ICAR / NTA

76practice questions written to this syllabus
8subjects

What CUET is

CUET (ICAR-UG): admission to B.Tech Dairy Technology is a university entrance exam run by ICAR / NTA, for candidates in India.

Format

Computer-based CUET subject tests (the ICAR-UG counselling uses CUET-UG scores). The subject combination ICAR accepts for each degree is set in each year's ICAR bulletin; check it there.

Sections

How it has changed

ICAR-NDRI's official B.Tech page (read 3 Oct 2026) says B.Tech Dairy Technology admission is 'on the basis of the merit in the combined examination (CUET) and counselling conducted by the ICAR': 10+2 with PCM or PCB, 50% aggregate (40% SC/ST/PH), age 16–23. The same route fills the ICAR quota at other state agricultural and veterinary universities that teach dairy technology; their state seats use state entrance exams (see india-state-cet-dairy). The subject-test combination was not re-checked for 2026.

How to prepare for CUET

Where our 76 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (64% of the questions): Dairy Industry & Milk Production Systems (27); Dairy Animal Science (12); Biochemistry for Dairy Science (10).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: General Microbiology (9); Mathematics & Statistics for Dairy Science (7); Engineering Fundamentals for Dairy Technologists (7).

    One pass per subject, then mixed sets across them.

  3. Lighter: Human Nutrition & Dairy in the Diet (2); Computing, Data & Digital Tools for Dairy (2).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

Official source: ndri.res.in

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. If a colleague is receiving an electric shock from a faulty machine, the first action is to:

  1. Switch off or isolate the supply before touching them
  2. Pull them away by the hand at once, before the shock worsens
  3. Throw water on them to cool the burns
  4. Wait for the circuit breaker to reset
Answer and working

A. Switch off or isolate the supply before touching them

Touching a person still in contact with the supply transfers the shock to the rescuer.

Engineering Fundamentals for Dairy Technologists · Electrical safety and earthing

2. In which phase of the growth curve do cells divide at a constant maximum rate?

  1. Exponential or log phase
  2. Lag phase
  3. Stationary phase
  4. Death phase
Answer and working

A. Exponential or log phase

In the log phase numbers double each generation and log count rises linearly with time.

General Microbiology · Growth curve, generation time and growth measurement

3. Which cattle breed is the most numerous and highest-yielding dairy breed worldwide?

  1. Sahiwal, from South Asia
  2. Jersey, from the Channel Islands
  3. Holstein-Friesian
  4. Brown Swiss, from the Alps
Answer and working

C. Holstein-Friesian

Holstein-Friesians dominate intensive dairying and give the highest volumes, with relatively low fat and protein percentages.

Dairy Animal Science · Dairy breeds of cattle and buffalo worldwide

4. Roughly what share of the world's milk is traded internationally, in milk-equivalent terms?

  1. About a third
  2. About a half
  3. Under a tenth
  4. Almost all
Answer and working

C. Under a tenth

Only a small fraction, commonly estimated at under 10%, crosses borders, mostly as powders, fats and cheese.

Dairy Industry & Milk Production Systems · International dairy trade: commodities, prices and the Global Dairy Trade auction

5. What is the main purpose of a milk chilling centre in a can-collection milk shed?

  1. To separate cream and make butter at village level
  2. To pasteurise and pack milk for direct sale to consumers
  3. To store milk at room temperature in cans until the processing plant needs it
  4. To cool warm can milk quickly before sending it to the processing plant
Answer and working

D. To cool warm can milk quickly before sending it to the processing plant

Chilling centres receive warm can milk, cool it in plate chillers to about 4 °C and dispatch it in insulated tankers.

Dairy Industry & Milk Production Systems · Raw milk transport and chilling

6. Why are the first few squirts of milk from each teat stripped before milking?

  1. To raise the fat content of the milk sent to the bulk tank
  2. To cool the teat so that milk let-down is slowed
  3. To detect mastitis and discard the milk with the highest bacterial load
  4. To provide the calf with its first colostrum feed before the milker starts work
Answer and working

C. To detect mastitis and discard the milk with the highest bacterial load

Fore-stripping reveals clots or abnormal milk from mastitis and removes teat-canal milk with most bacteria; it also helps stimulate let-down.

Dairy Industry & Milk Production Systems · Clean milk production on the farm

7. Which hand-milking method is recommended?

  1. Stripping throughout milking
  2. Pulling the teat downward hard
  3. Full-hand milking
  4. Knuckling
Answer and working

C. Full-hand milking

Full-hand milking squeezes from the base downward without stretching the teat.

Dairy Animal Science · Milk let-down and milking: hand and machine

8. What is a total mixed ration?

  1. A mineral lick placed in the field for grazing animals to use
  2. A blended feed of forages and concentrates fed together to housed cows
  3. Grass grazed in rotation across several paddocks over the season
  4. Crop residues such as straw and stover collected by smallholders after the harvest
Answer and working

B. A blended feed of forages and concentrates fed together to housed cows

A total mixed ration blends silage, hay and concentrates so each bite is balanced; it is typical of confinement systems. Rotational grazing and residue feeding belong to pasture and smallholder systems.

Dairy Industry & Milk Production Systems · Smallholder, pasture-based and confinement dairy systems

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 76 questions — CUET (ICAR-UG): admission to B.Tech Dairy Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.