USA · U.S. FDA with state regulatory agencies · unverified source
Grade A milk programme certifications (PMO / NCIMS) is a professional certification run by U.S. FDA with state regulatory agencies, for candidates in USA.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.
Check the current format, eligibility, fees and dates on the official site: fda.gov.
Under the Grade A Pasteurized Milk Ordinance and the National Conference on Interstate Milk Shipments, FDA trains and certifies state milk rating officers and sampling surveillance officers, and states license bulk milk hauler-samplers, pasteuriser operators and plant personnel in different ways.
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
One pass per subject, then mixed sets across them.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Leave untimed time for these and read every explanation, including for the options you rejected.
Official source: fda.gov
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. The recording thermometer on a pasteuriser reads 0.5 °C higher than the indicating reference thermometer during a check. What is the right first response?
C. Treat the record as suspect and adjust it to read no higher than the reference
The indicating thermometer is the reference; a recorder reading above it could hide under-pasteurisation, so it is adjusted to read no higher than the reference and the check is recorded. Allowed tolerances are set by the applicable regulation.
Instrumentation, Process Control & Automation · Temperature measurement: thermocouples, RTDs and recorders
2. Which time-temperature combination is the PMO's standard for high-temperature short-time pasteurisation of milk?
A. 72 °C for 15 seconds
HTST is 72 °C (161 °F) for 15 seconds; batch pasteurisation is 63 °C (145 °F) for 30 minutes. 63 °C for 15 s is far too short; 135 °C for about 2 s is in the UHT range.
Dairy Standards & Law Worldwide · USA: Grade A Pasteurized Milk Ordinance, NCIMS and standards of identity
3. What is the main barrier against bacteria entering the udder?
A. The streak canal with its sphincter and keratin
The canal is closed by a sphincter and keratin plug between milkings.
Dairy Animal Science · Anatomy of the mammary gland
4. Who publishes the Grade A Pasteurized Milk Ordinance?
C. The US Food and Drug Administration
FDA publishes the PMO as a model ordinance, in cooperation with the NCIMS; states then adopt it. USDA-AMS runs voluntary grading and marketing programmes; trade associations do not publish the PMO.
Dairy Standards & Law Worldwide · USA: Grade A Pasteurized Milk Ordinance, NCIMS and standards of identity
5. In the US, FDA has issued draft guidance on plant-based milk alternatives. Which position does it take?
B. Names like soy milk are understood; nutrient statements are advised
FDA's draft guidance recognises that names such as soy milk or almond milk are commonly used and recommends voluntary nutrient statements. It does not require imitation labels, ban the word milk or impose the milk standard of identity.
Dairy Standards & Law Worldwide · Labelling law and the protection of dairy names
6. Under the US FDA recall classification, which class applies when there is a reasonable probability that use of the product will cause serious adverse health consequences or death?
C. Class I
Class I is for serious health hazards. Class II covers temporary or reversible consequences or a remote probability of serious harm; Class III covers products unlikely to cause harm; there is no Class IV.
Dairy Food Safety Management Systems · Traceability, recall and withdrawal
7. On loss of air or power, a flow diversion valve on an HTST pasteuriser must move to:
B. The divert position
Failing to divert returns possibly under-processed milk to the balance tank rather than sending it forward. Forward flow, last position or half-open would all risk unpasteurised milk reaching storage.
Instrumentation, Process Control & Automation · Final control elements: valves and drives
8. Before pumping milk from a farm bulk tank, which check should the tanker driver make first?
B. Record the tank temperature and check the milk's smell and appearance
Drivers check and record temperature and sensory quality, measure volume, agitate and sample before pumping; milk failing these checks is rejected. Preservatives are not added to the bulk milk.
Dairy Industry & Milk Production Systems · Milk collection: village collection centres, bulk milk coolers and farm tanks
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.