LAISHA
Open Laisha

Certified Food Protection Manager examinations (e.g. ServSafe Manager)

USA · National Restaurant Association (ServSafe) and other ANSI-accredited providers · unverified source

11practice questions written to this syllabus
2subjects

What Certified Food Protection Manager examinations is

Certified Food Protection Manager examinations (e.g. ServSafe Manager) is a professional certification run by National Restaurant Association (ServSafe) and other ANSI-accredited providers, for candidates in USA.

Format

Proctored multiple-choice examination for food protection managers in food service; state and local codes based on the FDA Food Code require a certified manager.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.

Check the current format, eligibility, fees and dates on the official site: servsafe.com.

How it has changed

A food-service credential, included because food technologists in food service and quality roles are often asked for it.

How to prepare for Certified Food Protection Manager examinations

Where our 11 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (73% of the questions): Food Plant Sanitation, Cleaning & Pest Management (8).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Food Safety Inspection, Sampling & Enforcement (3).

    One pass per subject, then mixed sets across them.

  3. Hardest share: Food Plant Sanitation, Cleaning & Pest Management (1 hard of 8).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: servsafe.com

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. Why are cleaning tools colour-coded by area and use?

  1. To stop tools carrying contamination between zones
  2. To show at a glance which tools are the newest ones
  3. To identify which supplier made and delivered each tool
  4. To match the colours used on the production line
Answer and working

A. To stop tools carrying contamination between zones

Colour coding keeps, for example, floor and drain tools out of high-care and food-contact use and raw-area tools out of cooked areas. Age, supplier and decor are irrelevant.

Food Plant Sanitation, Cleaning & Pest Management · Cleaning-out-of-place and manual cleaning

2. What do most food laws require regarding the training of food handlers?

  1. Training commensurate with their work activities
  2. A university degree in food science for every handler
  3. No training, only an annual medical examination
  4. Training only for managers and never for handlers
Answer and working

A. Training commensurate with their work activities

Food handlers must be supervised and instructed or trained according to what they do; those running HACCP systems need adequate HACCP training. Degrees are not required for handlers.

Food Safety Inspection, Sampling & Enforcement · Training and education of food handlers

3. How long should hands be rubbed with soap during proper handwashing?

  1. About 2 minutes
  2. About 2 seconds
  3. At least about 20 seconds
  4. No rubbing is needed if hot water is used
Answer and working

C. At least about 20 seconds

Rubbing all surfaces for at least about 20 seconds, then rinsing and drying, removes transient organisms. Two seconds is ineffective, and water temperature does not replace friction and soap.

Food Plant Sanitation, Cleaning & Pest Management · Personnel hygiene and hand hygiene

4. Under the model food code used in many US jurisdictions, what type of person must many retail food establishments employ?

  1. A registered dietitian
  2. A certified food protection manager
  3. A chartered accountant
  4. A licensed veterinarian
Answer and working

B. A certified food protection manager

The model food code requires a person in charge, and in many establishments a certified food protection manager who has passed an accredited examination. The other professionals are not required.

Food Safety Inspection, Sampling & Enforcement · Training and education of food handlers

5. Why are blue, metal-detectable dressings used to cover cuts on food handlers' hands?

  1. Blue dressings kill bacteria in the wound
  2. They are cheaper than ordinary plasters
  3. Blue is required for all workwear in food plants
  4. They are easily seen and detected if they fall into food
Answer and working

D. They are easily seen and detected if they fall into food

Blue rarely occurs in food, and the metal strip lets metal detectors find a lost dressing. The colour has no antimicrobial effect.

Food Plant Sanitation, Cleaning & Pest Management · Personnel hygiene and hand hygiene

6. How much 12.5% sodium hypochlorite (125 000 mg/L available chlorine) is needed to make 100 L of a 200 mg/L sanitising solution?

  1. 1600 mL
  2. 1.6 L
  3. 160 mL
  4. 16 mL
Answer and working

C. 160 mL

C₁V₁ = C₂V₂: V₁ = 200 mg/L × 100 L/125 000 mg/L = 0.16 L = 160 mL. 16 mL slips a factor of ten; 1.6 L and 1600 mL slip it the other way.

Food Plant Sanitation, Cleaning & Pest Management · Sanitisers: chlorine, iodophors, quaternary ammonium compounds, peracetic acid and others

7. A worker wears disposable gloves while handling ready-to-eat sandwiches. When must the gloves be changed?

  1. Whenever a bare hand would need washing
  2. Only if they tear or become visibly wet
  3. Never, because gloves keep the food safe
  4. Only at the end of the shift or at breaks
Answer and working

A. Whenever a bare hand would need washing

Gloves pick up contamination exactly as hands do; they are changed, and hands washed, after any contaminating task. Wearing them for a whole shift gives false security.

Food Plant Sanitation, Cleaning & Pest Management · Personnel hygiene and hand hygiene

8. In a commonly used regulatory test protocol, what reduction must a food-contact sanitiser achieve against test bacteria in 30 seconds?

  1. 12-log (as for botulinum cook)
  2. 2-log (99%)
  3. 5-log (99.999%)
  4. 1-log (90%)
Answer and working

C. 5-log (99.999%)

The US sanitiser test protocol requires a 99.999% (5-log) reduction in 30 s for food-contact sanitisers. 1- and 2-log are far too small; 12-log is the thermal-processing target for C. botulinum spores, not a sanitiser standard.

Food Plant Sanitation, Cleaning & Pest Management · Principles of food plant sanitation and hygiene

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 11 questions — Certified Food Protection Manager examinations (e.g. ServSafe Manager)

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.