USA · American Society for Photogrammetry and Remote Sensing · unverified source
ASPRS Certified Mapping Scientist / Photogrammetrist (Remote Sensing, Lidar) is a professional certification run by American Society for Photogrammetry and Remote Sensing, for candidates in USA.
Experience review and written exam by specialty (remote sensing, lidar, photogrammetry, GIS/LIS).
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.
Check the current format, eligibility, fees and dates on the official site: asprs.org.
A recognised credential for forest remote-sensing and LiDAR specialists.
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
One pass per subject, then mixed sets across them.
Leave untimed time for these and read every explanation, including for the options you rejected.
Official source: asprs.org
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. With NIR = 0.45, red = 0.05 and L = 0.5, SAVI = (NIR − red) × (1 + L) ÷ (NIR + red + L) is:
C. 0.60
SAVI = 0.40 × 1.5 ÷ 1.00 = 0.60; omitting the (1 + L) factor gives 0.40.
Remote Sensing & Photogrammetry for Forestry · Vegetation indices (NDVI and others)
2. Radar backscatter 'saturation' with biomass means that:
B. Above a level, more biomass adds little backscatter
C-band saturates at low biomass; L-band at roughly 100–150 t/ha.
Remote Sensing & Photogrammetry for Forestry · Radar (SAR) in forestry
3. A pushbroom sensor differs from a whiskbroom scanner in that it:
B. Images a whole line at once
A line of detectors gives a longer dwell time per pixel and better signal.
Remote Sensing & Photogrammetry for Forestry · Satellite sensors and resolutions: spatial, spectral, temporal, radiometric
4. A scanner with a beam divergence of 0.3 mrad flies 1,500 m above the canopy. The footprint diameter is about:
A. 0.45 m
Footprint ≈ 0.3 × 10⁻³ × 1,500 = 0.45 m. 4.5 and 0.045 are factor-of-ten slips in milliradians.
Forest GIS, GNSS & LiDAR Analytics · Airborne LiDAR: point clouds, canopy height models
5. Interferometric SAR (InSAR) measures surface height from:
D. Phase differences between two images
TanDEM-X produced a global elevation model; InSAR height minus terrain gives canopy height.
Remote Sensing & Photogrammetry for Forestry · Radar (SAR) in forestry
6. The horizontal errors of four GNSS check points are 1, 2, 2 and 3 m. What is the RMSE?
B. 2.12 m
RMSE = √((1 + 4 + 4 + 9) ÷ 4) = √4.5 = 2.12 m. 2.00 is the mean error; 4.50 is the mean squared error before the square root.
Forest GIS, GNSS & LiDAR Analytics · GNSS data collection and accuracy
7. In the ASPRS LAS standard, which classification code is assigned to ground points?
D. 2
Class 2 is ground; 1 is unclassified; 3–5 are low, medium and high vegetation; 6 is building.
Forest GIS, GNSS & LiDAR Analytics · Airborne LiDAR: point clouds, canopy height models
8. A drone camera has a 2.4 µm pixel and an 8.8 mm lens. Using GSD = pixel size × flying height ÷ focal length, the GSD at 100 m above ground is:
A. 2.7 cm
GSD = 0.0000024 × 100 ÷ 0.0088 = 0.0273 m ≈ 2.7 cm.
Remote Sensing & Photogrammetry for Forestry · Drones (UAVs) for forest survey
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.