LAISHA
Open Laisha

California Registered Professional Forester (RPF) examination

USA · California Board of Forestry and Fire Protection, Professional Foresters Registration · unverified source

23practice questions written to this syllabus
3subjects

What California Registered Professional Forester examination is

California Registered Professional Forester (RPF) examination is a licensing and registration exam run by California Board of Forestry and Fire Protection, Professional Foresters Registration, for candidates in USA.

Format

Written examination taken after qualifying experience (education counts toward part of it); covers forest practice rules, silviculture, mensuration, protection and California law.

Sections

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.

Check the current format, eligibility, fees and dates on the official site: bof.fire.ca.gov.

How it has changed

California requires an RPF to prepare timber harvesting plans.

How to prepare for California Registered Professional Forester examination

Where our 23 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (61% of the questions): Forest Mensuration (14).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Professional Forestry Practice, Ethics & Registration (6).

    One pass per subject, then mixed sets across them.

  3. Lighter: Forest Surveying & Mapping (3).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Forest Surveying & Mapping (2 hard of 3), Forest Mensuration (1 hard of 14).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: bof.fire.ca.gov

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. A cruiser chooses a larger basal area factor in a stand of large, closely spaced trees mainly to:

  1. Increase the number of trees counted at each point
  2. Avoid the need to check any borderline trees, whatever their distance from the point
  3. Keep the number of in-trees per point to a manageable range
  4. Make the count independent of the diameter of each tree
Answer and working

C. Keep the number of in-trees per point to a manageable range

A BAF that gives roughly 5–12 in-trees per point is a common rule. In dense, large-tree stands a small BAF would include too many trees to tally reliably, with many hidden trees.

Forest Mensuration · Angle-count (Bitterlich) sampling and relascopes

2. A boundary corner lies under a dense canopy where fixes are poor. The best practice is to:

  1. Accept the first fix shown on the receiver
  2. Fix in an opening and measure an offset
  3. Move the corner to where signals are better
  4. Average only two seconds of data
Answer and working

B. Fix in an opening and measure an offset

Offsets (distance and bearing) from a well-observed open point give better accuracy than poor fixes at the corner.

Forest Surveying & Mapping · GNSS in forest survey and its accuracy under canopy

3. A crown ratio is most useful to a silviculturist as an indicator of:

  1. Wood density and the strength class of the sawn timber
  2. Tree vigour and its likely response to release or thinning
  3. The age of the tree in a stand without annual rings
  4. The basal area factor needed for a prism cruise of the stand
Answer and working

B. Tree vigour and its likely response to release or thinning

A long live crown relative to height signals a vigorous tree likely to respond to more growing space. Crown ratio says nothing direct about wood density, age or BAF choice.

Forest Mensuration · Bark thickness and crown measurements

4. Under the US convention, breast height for dbh is:

  1. 4.5 ft (1.37 m), uphill side
  2. 4.0 ft (1.22 m) above ground on the downhill side
  3. 1.3 m above the root collar on the downhill side
  4. 5.0 ft (1.52 m) above ground on the uphill side
Answer and working

A. 4.5 ft (1.37 m), uphill side

The USA measures dbh at 4.5 ft, which is 1.37 m, from the uphill side. The 1.3 m height belongs to the metric convention used in most other countries.

Forest Mensuration · Diameter and girth measurement: breast height conventions, calipers, tapes

5. Girard form class is defined as:

  1. Diameter outside bark at half total height, as a percentage of dbh inside bark
  2. Volume of the tree divided by the volume of a cylinder of the same dbh and height
  3. Diameter inside bark at the top of the first 16-ft log, as a percentage of dbh outside bark
  4. Total height divided by dbh, both expressed in the same units
Answer and working

C. Diameter inside bark at the top of the first 16-ft log, as a percentage of dbh outside bark

Girard form class is dib at the top of the first 16-ft log (17.3 ft above ground, allowing for the stump) divided by dbh outside bark, times 100. The volume-to-cylinder ratio is the form factor; height ÷ dbh is a slenderness ratio.

Forest Mensuration · Volume of standing trees: form factor and form quotient

6. In North American practice, a common base age for site index of fast-growing plantation species is:

  1. 100 years
  2. 5 years
  3. 25 years
  4. 150 years
Answer and working

C. 25 years

Base age 50 is common for many natural-stand species and 25 for fast-growing plantations such as southern pines. Very long base ages suit slow-growing species but not short-rotation plantations.

Forest Mensuration · Site index and site quality curves

7. In US units, what is the basal area of a tree 12 inches in dbh?

  1. 0.785 ft²
  2. 0.0785 ft²
  3. 452.4 ft²
  4. 0.0654 ft²
Answer and working

A. 0.785 ft²

Basal area (ft²) = 0.005454 × D² = 0.005454 × 144 = 0.785 ft². The constant 0.005454 is π / (4 × 144), converting square inches to square feet. Multiplying by D rather than D² gives 0.0654.

Forest Mensuration · Basal area and its uses

8. Around a tree being felled, the exclusion zone for other workers is commonly at least:

  1. Half the tree height
  2. One metre
  3. The width of the crown
  4. Twice the tree height
Answer and working

D. Twice the tree height

A falling tree can strike anywhere within its length and more; two tree lengths is a common minimum.

Professional Forestry Practice, Ethics & Registration · Health and safety responsibilities

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 23 questions — California Registered Professional Forester (RPF) examination

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.