LAISHA
Open Laisha

Range Forest Officer recruitment Silvicultural Systems: practice questions

Range Forest Officer recruitment (state exams) · India · State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC)

Original practice questions written to the published syllabus · not past papers
10worked here, free
22written to this exam in this subject
10syllabus units

About Range Forest Officer recruitment

Range Forest Officer recruitment (state exams) is a government recruitment exam run by State Public Service Commissions and state forest departments (e.g. MPPSC, UKPSC, UPPSC), for candidates in India. Usually objective and/or descriptive papers in general studies and forestry or science, with physical tests and an interview in some states.

Official site: mppsc.mp.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Silvicultural Systems in Range Forest Officer recruitment

The planned sequences of regeneration felling and tending that produce a forest of a particular form: clear felling, shelterwood, selection, coppice and their variants and conversions.

Our 22 Range Forest Officer recruitment questions in this subject: 18 easy, 4 medium, 0 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Range Forest Officer recruitment and are not shown on any other exam's page.

Question 1 · easy

In Troup's sense, what is a silvicultural system?

  1. The set of nursery techniques used to raise planting stock of a chosen species for a working circle
  2. The planned process of tending, removing and replacing crops that gives a forest a distinctive form
  3. The calculation of the annual allowable cut from growing stock, increment and rotation for a forest
  4. The legal classification of forests into reserved, protected and unclassed categories by the state
Answer and working

B. The planned process of tending, removing and replacing crops that gives a forest a distinctive form

Troup defined a silvicultural system as the process by which crops are tended, removed and replaced, producing woods of a distinctive form. Nursery practice, yield calculation and legal status are separate subjects (nursery, yield regulation and forest law).

Question 2 · easy

The regeneration period of an area is the time from:

  1. The planting of a crop to its first commercial thinning in the working circle
  2. The first commercial thinning to the final felling of the crop at the end of its planned rotation age
  3. The first regeneration felling to the removal of the last of the old crop on that area
  4. The final felling of one crop to the first seed year of the following crop
Answer and working

C. The first regeneration felling to the removal of the last of the old crop on that area

The regeneration period is the time over which a new crop is established on an area, from the first regeneration (seeding) felling to the final felling of the old crop. Planting to first thinning and first thinning to final felling are parts of the tending phase; seed years do not define it.

Question 3 · easy

Moist sal forests of northern India and chir pine forests of the Himalaya have both been managed under which system?

  1. Simple coppice system
  2. Pollard system
  3. Uniform shelterwood system
  4. Two-storied high forest
Answer and working

C. Uniform shelterwood system

Both were worked under the uniform (regular) shelterwood system, with results depending on fire and weed control and seed years. Coppice and pollarding are used in drier sal and on farms; two-storied high forest involves underplanting.

Question 4 · easy

A 1,500 ha working circle under the selection system has a felling cycle of 15 years. What is the annual coupe?

  1. 15 ha
  2. 100 ha
  3. 1,000 ha
  4. 225 ha
Answer and working

B. 100 ha

Annual coupe = area ÷ felling cycle = 1,500 ÷ 15 = 100 ha. 1,000 ha is a factor-of-ten slip; 15 ha confuses cycle with area; 225 ha comes from 15 × 15.

Question 5 · easy

The diameter curve of a balanced selection forest, with many small trees and progressively fewer large ones, is called:

  1. A reverse-J curve
  2. A bell-shaped curve
  3. An S-shaped curve
  4. A flat uniform curve
Answer and working

A. A reverse-J curve

Tree numbers fall steadily with increasing diameter, giving a reverse-J shape (de Liocourt). Even-aged stands have a roughly bell-shaped diameter distribution; S-shaped curves describe growth over time.

Question 6 · easy

Coppice regeneration comes from:

  1. Seed shed by standards left above the underwood
  2. Seedlings raised in a nursery and planted out
  3. Cuttings struck in polythene bags in a mist chamber
  4. Shoots from cut stumps (stools) or from roots (suckers)
Answer and working

D. Shoots from cut stumps (stools) or from roots (suckers)

Coppice is vegetative regeneration from stools or root suckers. Seed from standards, nursery seedlings and rooted cuttings are other means of regeneration.

Question 7 · easy

In coppice with standards, the standards are:

  1. Coppice shoots cut back every year to supply fodder to cattle
  2. Trees kept over several coppice rotations to produce large timber and seed
  3. Nursery seedlings planted to fill gaps where stools have died
  4. Marked boundary trees that are never felled under any prescription in the working plan
Answer and working

B. Trees kept over several coppice rotations to produce large timber and seed

Standards form the upper storey and are retained through several coppice rotations. Fodder shoots, gap-filling seedlings and boundary trees are not standards.

Question 8 · easy

Pollarding means:

  1. Cutting a tree close to the ground so that shoots grow from the stool at soil level
  2. Removing the lower branches of a standing tree to produce knot-free timber on the bole of the future sawlog
  3. Girdling a tree so that it dies standing and releases the regeneration beneath it
  4. Cutting a tree at about two to three metres or more so that new shoots grow above browsing animals
Answer and working

D. Cutting a tree at about two to three metres or more so that new shoots grow above browsing animals

Pollarding cuts at a height above browsing animals. Cutting at ground level is coppicing; removing lower branches is pruning; girdling kills unwanted trees in improvement fellings.

Question 9 · medium

Improvement fellings in Indian forestry are prescribed mainly to:

  1. Clear-fell the whole forest and replant it with a single exotic species on a fixed rotation chosen by the working-plan officer for its fast growth
  2. Establish a balanced reverse-J distribution exactly within the first felling cycle
  3. Cut all stems back to the ground so the forest becomes simple coppice for fuelwood
  4. Raise the quality of an irregular or degraded crop by removing dead, defective and unwanted trees, as a transitional measure
Answer and working

D. Raise the quality of an irregular or degraded crop by removing dead, defective and unwanted trees, as a transitional measure

Improvement fellings improve irregular forest without imposing a form, usually until a regular system can be adopted. Clear felling and replanting is conversion; a balanced structure takes many cycles; cutting all stems is coppicing.

Question 10 · medium

Dry deciduous forests in India, under heavy fuelwood demand, have commonly been managed under:

  1. Single-tree selection
  2. Coppice with standards
  3. Shelterwood strip system
  4. Two-storied high forest
Answer and working

B. Coppice with standards

Dry deciduous forests of coppicing species such as dry teak and dry sal supply fuelwood and poles under coppice with standards, with fire and grazing control. The other systems suit long-rotation timber forests.

A study plan for Silvicultural Systems in Range Forest Officer recruitment

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 22 questions): Selection system and group selection (3, 14%); Simple coppice, coppice with standards, pollarding (3, 14%); Uniform and group shelterwood systems (3, 14%); Accessory systems: two-storied high forest, conversion (2, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Choice of system by species, site and objectives (2, 9%); Classification of silvicultural systems (2, 9%); Clear-felling system and its variants (2, 9%); Conversion between systems (2, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Irregular shelterwood and strip systems (2, 9%); Silviculture of temperate, subtropical, humid tropical and dry tropical forests (1, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Simple coppice, coppice with standards, pollarding (3 easy of 3); Uniform and group shelterwood systems (3 easy of 3).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Range Forest Officer recruitment Silvicultural Systems

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.