LAISHA
Open Laisha

Forestry Engineer national technical qualification Forest Meteorology & Climatology: practice questions

Forestry Engineer (산림기사) national technical qualification · South Korea · Korea Forest Service and the national technical qualification system (Q-Net)

Original practice questions written to the published syllabus · not past papers
10worked here, free
25written to this exam in this subject
9syllabus units

About Forestry Engineer national technical qualification

Forestry Engineer (산림기사) national technical qualification is a licensing and registration exam run by Korea Forest Service and the national technical qualification system (Q-Net), for candidates in South Korea. Written MCQ exam in five subjects (Korean 기사 rules: 20 questions each, pass at 60 average with at least 40 in each), then a practical exam on forest management planning and survey.

Official site: q-net.or.kr.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest Meteorology & Climatology in Forestry Engineer national technical qualification

Weather and climate as they shape forest distribution, growth and hazards: radiation, temperature, moisture and wind, inside and above the canopy.

Our 25 Forestry Engineer national technical qualification questions in this subject: 8 easy, 16 medium, 1 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Forestry Engineer national technical qualification and are not shown on any other exam's page.

Question 1 · easy

Using a lapse rate of 6.5 °C per km, if mean temperature is 25 °C at 500 m, what is it at 2500 m?

  1. 12 °C
  2. 18.5 °C
  3. 5.4 °C
  4. 31.5 °C
Answer and working

A. 12 °C

Difference 2 km × 6.5 = 13 °C; 25 − 13 = 12 °C. 18.5 uses only 1 km; 5.4 uses the dry adiabatic rate.

Question 2 · medium

How does retaining a shelterwood canopy protect regenerating seedlings from radiation frost?

  1. It adds heat by respiration that warms the air around seedlings
  2. It causes advection of warm air from the surrounding area
  3. It reduces longwave heat loss from the ground to the sky
  4. It increases wind speed, mixing warm air down to the ground
Answer and working

C. It reduces longwave heat loss from the ground to the sky

The canopy absorbs and re-emits longwave radiation, so the ground cools less on clear nights.

Question 3 · medium

Where should a rain gauge be sited in a forested area to measure open-area rainfall?

  1. Directly under the densest part of the canopy
  2. In a large clearing or on a tower
  3. Against the trunk of a large tree
  4. Under the eaves of a forest building
Answer and working

B. In a large clearing or on a tower

Obstacles should be at a distance of at least two to four times their height; under-canopy gauges measure throughfall.

Question 4 · easy

Relative humidity is usually lowest at what time of day?

  1. Just before dawn
  2. Midnight
  3. Early morning
  4. Mid-afternoon
Answer and working

D. Mid-afternoon

RH falls as temperature rises because saturation vapour pressure rises; it is highest near dawn.

Question 5 · easy

A large difference between dry-bulb and wet-bulb temperatures indicates:

  1. Dry air
  2. Saturated air
  3. Rising pressure
  4. Heavy rain
Answer and working

A. Dry air

Evaporation cools the wet bulb more in dry air; zero depression means saturation.

Question 6 · easy

A spruce is 25 m tall with a diameter at breast height of 25 cm. What is its height-to-diameter (slenderness) ratio?

  1. 1
  2. 10
  3. 100
  4. 625
Answer and working

C. 100

Both in metres: 25/0.25 = 100. 1 compares metres with centimetres; 625 multiplies.

Question 7 · easy

Compared with an adjacent open field, the forest floor microclimate on a summer day usually has:

  1. Higher maxima and lower humidity
  2. Stronger wind and more light
  3. Wider daily temperature range
  4. Lower maxima and higher humidity
Answer and working

D. Lower maxima and higher humidity

Canopies buffer temperature, raise humidity and reduce wind and light.

Question 8 · easy

Temperature and humidity sensors in a standard screen are mounted at what height above the ground?

  1. About 10 m
  2. About 1.25–2 m
  3. At the soil surface
  4. About 0.1 m
Answer and working

B. About 1.25–2 m

WMO guidance sets 1.25–2 m over short grass; wind is measured at 10 m.

Question 9 · medium

What are the dimensions of a standard Class A evaporation pan?

  1. About 30 cm diameter and 10 cm deep
  2. About 2 m diameter and 1 m deep
  3. About 121 cm diameter and 25 cm deep
  4. About 50 cm square and 50 cm deep
Answer and working

C. About 121 cm diameter and 25 cm deep

The Class A pan is about 120.7 cm in diameter and 25.4 cm deep, on a wooden platform.

Question 10 · medium

Fire weather stations feeding the Canadian FWI System take their daily observations at:

  1. Midnight
  2. Sunrise
  3. Any convenient time
  4. Noon local standard time
Answer and working

D. Noon local standard time

The FWI System is calibrated to noon LST observations; consistency of timing is essential.

A study plan for Forest Meteorology & Climatology in Forestry Engineer national technical qualification

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (44% of the 25 questions): Weather instruments and forest weather stations (4, 16%); Wind and windthrow (4, 16%); Fire weather and fire danger indices (3, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Humidity and evapotranspiration (3, 12%); Temperature, frost and heat regimes (3, 12%); Atmosphere, radiation balance and energy budget (2, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Climate classification (Köppen, Holdridge life zones) (2, 8%); Forest microclimate and edge effects (2, 8%); Precipitation, interception and fog drip (2, 8%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Forest microclimate and edge effects (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Humidity and evapotranspiration (2 easy of 3); Atmosphere, radiation balance and energy budget (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Forestry Engineer national technical qualification Forest Meteorology & Climatology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.