LAISHA
Open Laisha

Sustainability Excellence Associate and Sustainability Excellence Professional Circular Economy & Bio-based Resources: practice questions

Sustainability Excellence Associate (SEA) and Sustainability Excellence Professional (SEP) · International · Green Business Certification Inc., with the International Society of Sustainability Professionals as education partner

Original practice questions written to the published syllabus · not past papers
10worked here, free
75written to this exam in this subject
10syllabus units

About Sustainability Excellence Associate and Sustainability Excellence Professional

Sustainability Excellence Associate (SEA) and Sustainability Excellence Professional (SEP) is a professional certification run by Green Business Certification Inc., with the International Society of Sustainability Professionals as education partner, for candidates worldwide. Online (remote) or test-centre examinations administered by GBCI; SEA is entry level and a prerequisite for SEP. Question count and duration are in GBCI's candidate handbook, not on the page read.

Source: sustainabilityprofessionals.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Circular Economy & Bio-based Resources in Sustainability Excellence Associate and Sustainability Excellence Professional

Designing waste out of the system: circular-economy principles, the biological cycle, industrial symbiosis, material flow analysis and the bioeconomy. Composting, biogas and briquetting technology are in the Agricultural Engineering subjects bioenergy-systems and waste-management-environmental-engg; this subject covers the system design, metrics and policy.

Our 75 Sustainability Excellence Associate and Sustainability Excellence Professional questions in this subject: 13 easy, 48 medium, 14 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Sustainability Excellence Associate and Sustainability Excellence Professional and are not shown on any other exam's page.

Question 1 · hard

Why does the circular economy favour service models for products designed for the technical cycle?

  1. Service models allow technical materials to be composted safely at the end of their working life
  2. The provider keeps ownership and so has an incentive to design for durability and recovery
  3. Ownership by the user is illegal for technical products under ecodesign law
  4. Service models remove the need for any reverse logistics or collection systems
Answer and working

B. The provider keeps ownership and so has an incentive to design for durability and recovery

When the manufacturer owns the product and sells its use, longer life and easier recovery of parts and materials increase its profit. Technical materials should not be composted, user ownership is not illegal, and service models still need reverse logistics.

Question 2 · medium

A pesticide container stewardship scheme asks farmers to triple-rinse empty containers before return. Why?

  1. Rinsing converts the container into a biodegradable material that composts in the field within one season
  2. Rinsing increases the container's mass so that the producer meets a weight-based target
  3. Rinsing is needed only to remove the label so the container can be resold for food use
  4. Rinsing removes residues so containers can be handled and recycled as non-hazardous plastic
Answer and working

D. Rinsing removes residues so containers can be handled and recycled as non-hazardous plastic

Triple rinsing (with rinsate added to the spray tank) removes most residues, allowing collection and recycling into non-food products. It does not make plastic biodegradable, does not add mass, and recycled containers must not be used for food.

Question 3 · easy

Of 1000 kg of a food-processing by-product, 40 % goes to a food ingredient and half of the remainder to animal feed. How much is left for anaerobic digestion?

  1. 600 kg
  2. 300 kg
  3. 500 kg
  4. 200 kg
Answer and working

B. 300 kg

Remainder after food = 1000 × 0.60 = 600 kg; half to feed = 300 kg; left = 300 kg. 600 is the remainder before feed; 500 halves the whole; 200 subtracts both shares from the original (40 % + 40 %).

Question 4 · medium

A country has domestic extraction of 500 Mt, imports of 200 Mt and exports of 150 Mt. What is its domestic material consumption (DMC)?

  1. 700 Mt
  2. 850 Mt
  3. 550 Mt
  4. 450 Mt
Answer and working

C. 550 Mt

DMC = DE + imports − exports = 500 + 200 − 150 = 550 Mt. 700 Mt is DMI (DE + imports); 850 Mt adds exports; 450 Mt subtracts imports and adds exports.

Question 5 · easy

According to FAO and UNEP definitions, where does food loss end and food waste begin?

  1. Food loss occurs only on the farm; food waste covers everything after the farm gate, including processing
  2. Food loss is edible food discarded; food waste is inedible parts such as bones and peel
  3. Food loss runs from harvest up to retail; food waste occurs at retail, food service and households
  4. Food loss occurs in low-income countries; food waste occurs in high-income countries
Answer and working

C. Food loss runs from harvest up to retail; food waste occurs at retail, food service and households

FAO's food loss covers harvest up to but not including retail; UNEP's food waste covers retail, food service and households. Both can include edible and inedible parts depending on the indicator, and both occur in every country.

Question 6 · medium

Lignocellulosic biomass such as straw or bagasse is made mainly of which three components?

  1. Starch, protein and oil
  2. Cellulose, hemicellulose and lignin
  3. Pectin, chitin and keratin
  4. Glucose, fructose and sucrose
Answer and working

B. Cellulose, hemicellulose and lignin

Lignocellulose consists mainly of cellulose, hemicellulose and lignin, in species-dependent proportions. Starch, protein and oil dominate grains and seeds; chitin and keratin are animal or fungal polymers; free sugars are minor in dry residues.

Question 7 · easy

A producer places 10000 t of packaging on the market against a 60 % recycling target and achieves 4500 t of recycling. What is the shortfall?

  1. 5500 t
  2. 1500 t
  3. 6000 t
  4. 3000 t
Answer and working

B. 1500 t

Obligation = 10000 × 0.60 = 6000 t; shortfall = 6000 − 4500 = 1500 t. 5500 t subtracts from the whole quantity placed; 6000 t is the obligation; 3000 t halves the obligation.

Question 8 · hard

Why does a product-service system not automatically reduce environmental impact?

  1. Service contracts are always longer than product lifetimes, so goods are kept in service far too long
  2. Product-service systems are forbidden from using remanufactured parts by contract law
  3. Product-service systems always require new products to be manufactured for each user
  4. Rented goods are sometimes treated carelessly and providers still profit from frequent replacement
Answer and working

D. Rented goods are sometimes treated carelessly and providers still profit from frequent replacement

Incentives depend on contract design: careless use, extra transport in sharing systems and rebound effects can cancel gains, and a provider paid per use may still prefer replacement. The other claims are false generalisations.

Question 9 · medium

What is the main economic barrier for circular business models that recover by-products from many small farms and shops?

  1. The cost of reverse logistics for collecting small, dispersed and variable quantities
  2. The absence of any demand for recovered materials in every market worldwide
  3. The legal ban on selling any product made from a by-product in most countries
  4. The fact that recovered materials always cost more than virgin materials to process
Answer and working

A. The cost of reverse logistics for collecting small, dispersed and variable quantities

Collecting small, perishable or variable volumes from dispersed sources is expensive and often decides viability; quality assurance and waste-status rules are other barriers. Demand exists for many recovered products, legal bans are not general, and recovered materials are not always costlier.

Question 10 · medium

A product has a linear flow index (LFI) of 0.60 and lasts 1.5 times the industry average with average intensity of use. Using MCI = 1 − LFI × 0.9/X, what is its material circularity indicator?

  1. 0.46
  2. 0.64
  3. 0.40
  4. 0.19
Answer and working

B. 0.64

X = 1.5 × 1 = 1.5; F(X) = 0.9/1.5 = 0.6; MCI = 1 − 0.60 × 0.6 = 0.64. 0.46 uses X = 1; 0.40 ignores the utility factor; 0.19 multiplies by X instead of dividing.

A study plan for Circular Economy & Bio-based Resources in Sustainability Excellence Associate and Sustainability Excellence Professional

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (51% of the 75 questions): Extended producer responsibility and eco-design (10, 13%); Food waste valorisation and biorefineries (10, 13%); Bio-based and biodegradable materials: claims and evidence (9, 12%); Circular business models (9, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Material flow analysis and resource-efficiency metrics (9, 12%); Circularity indicators and policies (8, 11%); Cascading use of biomass (7, 9%); Biological and technical cycles (6, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Linear versus circular economy; the butterfly diagram (5, 7%); Industrial ecology and industrial symbiosis (2, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Industrial ecology and industrial symbiosis (1 hard of 2), Circularity indicators and policies (2 hard of 8), Bio-based and biodegradable materials: claims and evidence (2 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Cascading use of biomass (3 easy of 7); Food waste valorisation and biorefineries (3 easy of 10).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Sustainability Excellence Associate and Sustainability Excellence Professional Circular Ec

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.