Certified Crop Adviser with Sustainability Specialty Pesticides in the Environment: Fate, Risk & Reduction: practice questions
Certified Crop Adviser (CCA) with Sustainability Specialty · USA / Canada / international · International Certified Crop Adviser program (American Society of Agronomy)
Original practice questions written to the published syllabus · not past papers
10worked here, free
35written to this exam in this subject
8syllabus units
About Certified Crop Adviser with Sustainability Specialty
Certified Crop Adviser (CCA) with Sustainability Specialty is a professional certification run by International Certified Crop Adviser program (American Society of Agronomy), for candidates in USA / Canada / international. International exam plus a local/regional exam for CCA; specialty certifications (Sustainability, 4R Nutrient Management) each add an exam. Experience and education requirements apply.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Pesticides in the Environment: Fate, Risk & Reduction in Certified Crop Adviser with Sustainability Specialty
IPM and thresholds, resistance management, drift reduction and sprayer calibration, risk indicators and mitigation measures such as buffer zones.
What happens to pesticides after application and how to reduce harm: fate processes, residues, effects on non-target organisms, regulatory risk assessment and reduction strategies. Field IPM practice is in the crop protection subjects; this subject is the environmental science of pesticides.
Our 35 Certified Crop Adviser with Sustainability Specialty questions in this subject: 2 easy, 22 medium, 11 hard, across 8 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Certified Crop Adviser with Sustainability Specialty and are not shown on any other exam's page.
Question 1 · medium
Tiered risk assessment means that regulators:
Always begin with large and costly field studies first
Use a single test for every organism
Ignore exposure until after approval
Start with conservative screens, then refine
Answer and working
D. Start with conservative screens, then refine
Lower tiers are simple and conservative; higher tiers more realistic.
Question 2 · hard
In India, spraying a registered pesticide on a crop not listed on its label is:
Permitted if the dose is halved
Permitted for any crop in the same family
Not permitted, as approval is crop by crop
Permitted for export crops only
Answer and working
C. Not permitted, as approval is crop by crop
Registration is crop-wise; use outside label claims is not allowed.
Question 3 · medium
Total kilograms of active ingredient is a poor measure of pesticide risk mainly because:
Doses and toxicity differ by orders of magnitude
All pesticides have the same toxicity
Modern products are applied at much higher doses per hectare
Sales data never record active ingredients
Answer and working
A. Doses and toxicity differ by orders of magnitude
Modern products used at grams per hectare can be more toxic than older kg-rate products.
Question 4 · hard
A field receives one full standard dose of product A and half standard doses of products B and C. The treatment frequency index is:
Lechenet and colleagues' study of French arable farms suggested that many farms could:
Not reduce use without halving yields
Stop all pesticides with higher yields
Cut pesticide use without loss of profit
Only reduce use by switching to aerial spray
Answer and working
C. Cut pesticide use without loss of profit
Many farms could reduce use substantially without loss of productivity or profitability.
Question 6 · easy
The pest density at which control should be applied to prevent economic damage is the:
Economic injury level
Economic threshold
General equilibrium position
Maximum residue limit
Answer and working
B. Economic threshold
The economic (action) threshold is set below the economic injury level.
Question 7 · medium
In a farmer field school, farmers mainly learn by:
Reading pesticide labels in a classroom
Watching product demonstrations by pesticide dealers
Observing pests and enemies in their fields
Receiving free pesticides each season
Answer and working
C. Observing pests and enemies in their fields
Season-long, field-based experiential learning.
Question 8 · medium
Rotating insecticides between different IRAC mode-of-action groups mainly:
Slows the evolution of resistance
Raises residues in the harvested crop
Increases toxicity to natural enemies
Removes the need for pest monitoring
Answer and working
A. Slows the evolution of resistance
Alternating modes of action reduces selection pressure.
Question 9 · hard
Nozzles deliver 1.2 L/min each, spacing is 0.5 m and forward speed 6 km/h. Using L/ha = (L/min x 600)/(km/h x spacing m), the application volume is:
120 L/ha
480 L/ha
240 L/ha
24 L/ha
Answer and working
C. 240 L/ha
1.2 x 600 / (6 x 0.5) = 720 / 3 = 240.
Question 10 · hard
Worn sprayer nozzles are a problem mainly because they:
Reduce output to zero at once and block flow
Make droplets perfectly uniform
Lower the pesticide's toxicity
Raise output and change spray quality
Answer and working
D. Raise output and change spray quality
Wear increases flow and alters the droplet spectrum, causing overdosing.
A study plan for Pesticides in the Environment: Fate, Risk & Reduction in Certified Crop Adviser with Sustainability Specialty
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (63% of the 35 questions): Spray drift and application technology (9, 26%); Pesticide risk indicators and reduction targets (7, 20%); IPM as risk reduction (6, 17%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Biopesticides and botanicals (4, 11%); Pesticide risk assessment and registration (4, 11%); Effects on non-target organisms: pollinators, aquatic life, soil biota (2, 6%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Environmental fate: sorption, degradation, volatilisation, leaching, runoff (2, 6%); Classification of pesticides by target, chemistry and toxicity (1, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Pesticide risk assessment and registration (2 hard of 4), Environmental fate: sorption, degradation, volatilisation, leaching, runoff (1 hard of 2), Pesticide risk indicators and reduction targets (3 hard of 7).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: IPM as risk reduction (1 easy of 6); Spray drift and application technology (1 easy of 9).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.