LAISHA
Open Laisha

QCI-NABET accreditation of EIA consultant organisations Environmental Impact Assessment & Strategic Environmental Assessment: practice questions

QCI-NABET accreditation of EIA consultant organisations (EIA Coordinator and Functional Area Expert approval) · India · National Accreditation Board for Education and Training, Quality Council of India

Original practice questions written to the published syllabus · not past papers
10worked here, free
39written to this exam in this subject
14syllabus units

About QCI-NABET accreditation of EIA consultant organisations

QCI-NABET accreditation of EIA consultant organisations (EIA Coordinator and Functional Area Expert approval) is a professional certification run by National Accreditation Board for Education and Training, Quality Council of India, for candidates in India. Not a public written exam: organisations are accredited after document review and assessment, and individual EIA coordinators and functional area experts are approved through assessment interviews against sector-specific competence criteria.

Official site: nabet.qci.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Environmental Impact Assessment & Strategic Environmental Assessment in QCI-NABET accreditation of EIA consultant organisations

The full EIA process as a practitioner runs it: screening, scoping, baseline studies, impact prediction, significance, mitigation hierarchy, environmental management plans, public consultation, review and follow-up, plus SEA and social impact assessment. The Agribusiness subject natural-resource-environmental-economics and the Agricultural Engineering waste subject each carry a one-unit introduction to EIA; this is the full subject.

Our 39 QCI-NABET accreditation of EIA consultant organisations questions in this subject: 12 easy, 23 medium, 4 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to QCI-NABET accreditation of EIA consultant organisations and are not shown on any other exam's page.

Question 1 · medium

Which sequence shows the generic EIA process in the usual order?

  1. Screening, scoping, baseline and prediction, mitigation, report, review, decision, follow-up
  2. Scoping, decision, screening, baseline, review, mitigation, monitoring and finally report writing
  3. Decision, construction, baseline, screening, scoping and finally public consultation
  4. Monitoring, audit, decision, screening, scoping, mitigation and report preparation
Answer and working

A. Screening, scoping, baseline and prediction, mitigation, report, review, decision, follow-up

EIA starts with screening, then scoping, baseline, prediction and significance, mitigation, the EIA report, review, decision and follow-up, with consultation through several stages. Placing the decision or construction before assessment defeats its purpose.

Question 2 · easy

Under India's EIA Notification 2006, which body appraises Category A projects?

  1. The Expert Appraisal Committee for the central environment ministry
  2. The State Expert Appraisal Committee
  3. The district collector's office
  4. The State Pollution Control Board alone
Answer and working

A. The Expert Appraisal Committee for the central environment ministry

Category A projects are appraised at central level by Expert Appraisal Committees advising the MoEFCC; Category B projects go to SEIAA advised by SEAC. The SPCB conducts public hearings but does not appraise.

Question 3 · easy

Which four stages make up the environmental clearance process under India's EIA Notification 2006?

  1. Planning, design, construction and commissioning of the project
  2. Screening, scoping, public consultation and appraisal
  3. Inspection, sampling, prosecution and closure of the industry
  4. Application, payment, inspection and automatic approval after 30 days
Answer and working

B. Screening, scoping, public consultation and appraisal

The Notification sets screening (Category B only), scoping (ToR), public consultation and appraisal. The other sequences describe project phases, enforcement or an invented deemed-approval process.

Question 4 · easy

What is the main output of scoping?

  1. The final decision to approve or reject the project with conditions attached by the authority
  2. The key issues, alternatives, boundaries and methods, set out in terms of reference
  3. The environmental clearance letter and its validity period
  4. The post-project audit comparing predicted and actual impacts
Answer and working

B. The key issues, alternatives, boundaries and methods, set out in terms of reference

Scoping focuses the study on significant issues and reasonable alternatives and produces the terms of reference. Decisions, clearance letters and audits come at later stages.

Question 5 · medium

Which item belongs in an EIA's terms of reference?

  1. The amount of compensation each villager will finally receive after construction is complete
  2. The proponent's annual profit forecast and expected dividend to shareholders
  3. Baseline parameters, sampling seasons and frequency, and prediction methods to be used
  4. The name of the judge who will hear any appeal against the clearance
Answer and working

C. Baseline parameters, sampling seasons and frequency, and prediction methods to be used

ToR specify the project description, study area, baseline parameters and seasons, prediction methods, significance criteria, mitigation, EMP, consultation and report contents. Final compensation, profits and judges are not ToR items.

Question 6 · medium

For a large canal irrigation project, which issue would scoping most clearly identify as key?

  1. Electromagnetic radiation from mobile phone towers in nearby towns
  2. Waterlogging and salinity in the command area and reduced flows downstream
  3. Radioactive waste storage at the project headworks
  4. Light pollution affecting astronomical observatories
Answer and working

B. Waterlogging and salinity in the command area and reduced flows downstream

Irrigation schemes typically raise water tables and salinity without drainage, and diversions reduce downstream flows for ecosystems and users; resettlement and vector-borne disease are other common issues. The other options are not typical of irrigation.

Question 7 · medium

For comparing alternative routes of a pipeline through sensitive landscapes, which method is most suitable?

  1. Weighted GIS overlay analysis
  2. A simple checklist of impact types
  3. A questionnaire checklist sent to the proponent
  4. An ad hoc expert panel without maps
Answer and working

A. Weighted GIS overlay analysis

Overlay analysis in GIS maps habitats, slopes, settlements and heritage along each corridor and scores suitability, which suits spatial comparison of routes. Checklists and ad hoc panels lack spatial analysis.

Question 8 · easy

Two identical machines each produce 70 dB at a receptor. What is the combined level?

  1. 140 dB
  2. 70 dB
  3. 73 dB
  4. 35 dB
Answer and working

C. 73 dB

L = 10 log10(10^7 + 10^7) = 70 + 10 log10 2 = 73 dB. Decibels add logarithmically, so 140 is wrong; 70 ignores the second source; 35 halves the level.

Question 9 · medium

Settlement and roadside businesses springing up along a new rural road are an example of what kind of impact?

  1. Direct impact
  2. Residual impact
  3. Induced impact
  4. Transboundary impact
Answer and working

C. Induced impact

Induced impacts arise from activities the project stimulates. Direct impacts are caused by the project itself (land take for the road); residual impacts remain after mitigation; transboundary impacts cross borders.

Question 10 · easy

An effluent limit is 30 mg/L BOD and the EMP sets an action threshold at 80 % of the limit. Above what value must managers investigate?

  1. 30 mg/L
  2. 24 mg/L
  3. 37.5 mg/L
  4. 6 mg/L
Answer and working

B. 24 mg/L

Action threshold = 0.80 × 30 = 24 mg/L. 30 is the legal limit itself; 37.5 divides by 0.8; 6 is the difference between limit and threshold.

A study plan for Environmental Impact Assessment & Strategic Environmental Assessment in QCI-NABET accreditation of EIA consultant organisations

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (56% of the 39 questions): Baseline data collection (5, 13%); Impact prediction and evaluation of significance (5, 13%); Environmental management plans and monitoring (4, 10%); Scoping and terms of reference (4, 10%); Screening and categorisation of projects (4, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: EIA review, decision-making and environmental clearance (3, 8%); Legal frameworks: NEPA, EU EIA Directive, India EIA Notification and others (3, 8%); Mitigation hierarchy: avoid, minimise, restore, offset (3, 8%); Public consultation and hearings (3, 8%); Cumulative impact assessment (1, 3%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: History, purpose and principles of EIA (1, 3%); Impact identification: checklists, matrices, networks, overlays (1, 3%); Lender standards: IFC Performance Standards and Equator Principles (1, 3%); Social impact assessment (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Cumulative impact assessment (1 hard of 1), Impact prediction and evaluation of significance (2 hard of 5), Public consultation and hearings (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Legal frameworks: NEPA, EU EIA Directive, India EIA Notification and others (2 easy of 3); Mitigation hierarchy: avoid, minimise, restore, offset (2 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — QCI-NABET accreditation of EIA consultant organisations Environmental Impact Assessment &

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.