LAISHA
Open Laisha

ICAR AIEEA Milk & Milk Products Technology: practice questions

ICAR AIEEA (PG): Master's entrance, Veterinary Science and Animal Sciences · India · NTA for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
48written to this exam in this subject
11syllabus units

About ICAR AIEEA

ICAR AIEEA (PG): Master's entrance, Veterinary Science and Animal Sciences is a postgraduate admission exam run by NTA for ICAR, for candidates in India. Computer-based, 120 MCQs in 120 minutes, +4 for correct and -1 for wrong, maximum 480. English only.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Milk & Milk Products Technology in ICAR AIEEA

Milk composition by species, physical constants, platform tests and their reagents, pasteurisation and UHT time-temperatures, phosphatase and peroxidase tests, ghee methods and constants, starter organisms, rennet action, FSSAI milk classes, and short calculations (Pearson square, added water, overrun).

Milk composition and quality testing, adulteration, heat processing, indigenous and fermented dairy products, dairy standards, packaging and quality control.

Our 48 ICAR AIEEA questions in this subject: 12 easy, 31 medium, 5 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA and are not shown on any other exam's page.

Question 1 · medium

At about what pH does casein precipitate from milk at room temperature, the basis of acid curd products?

  1. pH 3.2
  2. pH 6.6
  3. pH 4.6
  4. pH 5.8
Answer and working

C. pH 4.6

Casein's isoelectric point is about pH 4.6. pH 6.6 is fresh milk itself.

Question 2 · hard

Genuine milk is taken as 8.5% SNF. A sample has 7.48% SNF. Using added water = (S - S')/S x 100, expressed as per cent of the adulterated sample, how much water was added?

  1. 12.0%
  2. 88.0%
  3. 1.02%
  4. 13.6%
Answer and working

A. 12.0%

(8.5 - 7.48)/8.5 x 100 = 12.0% of the sample is extraneous water. 13.6% is water per 100 parts of genuine milk (8.5/7.48 - 1), a different basis; 88% is the genuine milk fraction; 1.02% is the SNF difference (8.5 - 7.48) without dividing by S.

Question 3 · easy

Which organism is now regarded as the most heat-resistant non-spore-forming pathogen that sets milk pasteurisation standards?

  1. Listeria monocytogenes
  2. Mycobacterium tuberculosis
  3. Coxiella burnetii
  4. Brucella abortus
Answer and working

C. Coxiella burnetii

Coxiella burnetii (Q fever) replaced M. tuberculosis as the index organism, and the LTLT temperature was raised to 63 degrees C for it.

Question 4 · easy

In direct UHT heating by steam injection, how is the water added by condensed steam removed?

  1. By reverse osmosis after cooling
  2. By flash cooling in a vacuum chamber
  3. It is left in and declared on the label
  4. By a centrifugal separator at 50 degrees C
Answer and working

B. By flash cooling in a vacuum chamber

Flash evaporation under vacuum removes the same amount of water as was added, restoring the original solids, and cools the milk instantly.

Question 5 · medium

In the turbidity (Aschaffenburg) test, a filtrate of milk treated with ammonium sulphate stays clear on boiling. What does this indicate?

  1. The milk is pasteurised at 72 degrees C and its whey proteins are still fully native
  2. The milk has been sterilised, leaving almost no undenatured whey protein
  3. The milk has been adulterated with starch or cereal flour
  4. The milk is raw and still contains active alkaline phosphatase
Answer and working

B. The milk has been sterilised, leaving almost no undenatured whey protein

Ammonium sulphate precipitates casein and denatured whey protein; any native whey protein left in the filtrate turns turbid on boiling. No turbidity means the whey proteins were already denatured by sterilisation.

Question 6 · medium

Why does ghee from cotton-tract areas carry relaxed standards for RM value and BR reading?

  1. Feeding cottonseed changes milk fat, lowering RM value and raising BR reading
  2. Cotton-tract areas have hotter climates, which raise the RM value of ghee above the national range
  3. Cotton-tract ghee is mostly from goats, whose fat has no butyric acid
  4. Cotton-tract ghee is made by the desi method, which lowers the RM value
Answer and working

A. Feeding cottonseed changes milk fat, lowering RM value and raising BR reading

Heavy cottonseed feeding alters the fatty acid profile of milk fat. Standards therefore allow lower RM and higher BR for those regions; it is a feed effect, not a method or climate effect.

Question 7 · easy

Shrikhand is made from which intermediate product?

  1. Makkhan, butter from churned dahi
  2. Khoa, open-pan concentrated milk
  3. Chhena, acid-coagulated cow milk
  4. Chakka, dahi drained of its whey
Answer and working

D. Chakka, dahi drained of its whey

Dahi is hung in cloth to make chakka, which is mixed with sugar and flavourings to make shrikhand.

Question 8 · medium

Which fermented milk is produced by grains containing lactic acid bacteria and yeasts, giving a slightly alcoholic, fizzy drink?

  1. Mishti doi
  2. Shrikhand
  3. Acidophilus milk
  4. Kefir
Answer and working

D. Kefir

Kefir grains are a matrix of polysaccharide with bacteria and yeasts; the yeasts produce ethanol and CO2. Acidophilus milk is a single-species bacterial product.

Question 9 · medium

Why do FSSAI minimum fat and SNF values for buffalo milk and cow milk differ between states?

  1. The values depend on the price of milk set by state cooperatives
  2. Local milk composition differs by region, so the schedule sets regional minima
  3. Each state government sets its own dairy standards under its own state law, outside the FSS Act
  4. Only states with toned milk plants are given higher minima
Answer and working

B. Local milk composition differs by region, so the schedule sets regional minima

The central regulation lists state- or region-wise minima reflecting typical local milk; states do not legislate separate standards outside the FSS framework.

Question 10 · medium

A sample sold as toned milk tests 3.1% fat and 8.3% SNF. Judged against the FSSAI toned milk standard, what is the finding?

  1. Substandard, because fat is above 3.0%
  2. Conforms as double toned milk instead
  3. Conforms, because fat is above 3.0%
  4. Substandard, because SNF is below 8.5%
Answer and working

D. Substandard, because SNF is below 8.5%

Toned milk needs both at least 3.0% fat and 8.5% SNF; 8.3% SNF fails. Fat above the minimum is not a fault, and double toned milk needs 9.0% SNF.

A study plan for Milk & Milk Products Technology in ICAR AIEEA

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (44% of the 48 questions): Codex and national standards for dairy products (6, 13%); Ghee (5, 10%); Milk composition (5, 10%); UHT processing (5, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Adulteration of milk (4, 8%); Dahi and other fermented products (4, 8%); Dairy packaging (4, 8%); Milk quality tests (4, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Paneer and khoa (4, 8%); Pasteurisation (4, 8%); Dairy quality control (3, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Codex and national standards for dairy products (2 hard of 6), Adulteration of milk (1 hard of 4), Paneer and khoa (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Milk composition (2 easy of 5); Dairy quality control (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA Milk & Milk Products Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.