BCS Agriculture cadre — Agricultural Engineering (subject code 821) is a government recruitment exam run by Bangladesh Public Service Commission, for candidates in Bangladesh.
Format
Preliminary 200-mark MCQ (2 h); written 900 marks; viva 200 marks. Code 821 is a 200-mark post-related paper.
Sections
Part I: agricultural machinery; irrigation and water management; food engineering principles; food engineering
Part II: advanced machinery and machine design; irrigation engineering; food processing and quality; on-farm water management, pumps and groundwater
How it has changed
Preliminary marks were raised from 100 to 200 from the 35th BCS. Same core as GATE AG: machinery, irrigation and food engineering. Syllabus PDF (pp. 192–193): https://objectstorage.ap-dcc-gazipur-1.oraclecloud15.com/n/axvjbnqprylg/b/V2Ministry/o/office-bpsc/2024/12/36342dd1ff6e4c418894b0ae354c9c65.pdf
How to prepare for BCS Agriculture cadre
Where our 256 questions for it fall
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Heaviest (58% of the questions): Sprinkler & Micro-Irrigation Systems (45); Machine Design (27); Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (27); Post-Harvest Engineering of Horticultural Crops (27); Storage Engineering, Material Handling & Packaging (22).
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
Middle band: Farm Machinery & Equipment II — Plant Protection, Harvesting, Threshing (15); Mechanics of Tillage & Traction (Soil Dynamics) (15); Food Quality, Safety & Process Plant Design (14); Farm Machinery & Equipment I — Tillage, Sowing, Planting, Fertiliser (13); Post-Harvest Engineering of Cereals, Pulses & Oilseeds (13).
One pass per subject, then mixed sets across them.
Lighter: Food & Dairy Engineering (13); Engineering Properties of Agricultural Produce (9); Heat & Mass Transfer (7); Farm Machinery Management & Economics (6); Refrigeration, Air-Conditioning & Cold-Chain Engineering (3).
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Hardest share: Post-Harvest Engineering of Horticultural Crops (4 hard of 27), Storage Engineering, Material Handling & Packaging (2 hard of 22), Irrigation Engineering (Soil-Water-Plant, Conveyance, Surface Methods) (1 hard of 27).
Leave untimed time for these and read every explanation, including for the options you rejected.
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. The double seam is the method of
Sealing a PE pouch
Attaching the end to a metal container body
Closing a jute bag
Joining glass to metal
Answer and working
B. Attaching the end to a metal container body
In a double seam the can-end curl and the body flange are interlocked and compressed in two rolling operations. Pouches are heat-sealed and bags sewn.
Storage Engineering, Material Handling & Packaging · Packaging materials: paper, plastics and laminates
2. In CIP of a milk pasteuriser, the alkaline and acid detergents respectively remove
Mineral deposits (scale); fat and protein
Fat and protein; mineral deposits (milkstone)
Lactose; fat
Bacteria only; lactose only
Answer and working
B. Fat and protein; mineral deposits (milkstone)
Sodium hydroxide saponifies fat and dissolves protein; nitric or phosphoric acid dissolves calcium phosphate deposits.
Food & Dairy Engineering · Cleaning-in-place and sanitary design
3. The pump normally used as the timing pump of an HTST milk pasteuriser is a
Positive-displacement pump
Centrifugal pump
Jet pump
Air-lift pump
Answer and working
A. Positive-displacement pump
A positive-displacement pump delivers a fixed volume per revolution, nearly independent of back-pressure, so it fixes the maximum flow and hence the minimum holding time. A centrifugal pump's flow changes with system head.
Food & Dairy Engineering · Fluid flow in food plants: pumps, pipes and rheology
4. Seed drills and sprayers generally have lower field efficiency than primary tillage implements mainly because they:
Must stop to be refilled with seed, fertiliser or spray liquid
Need more drawbar power per metre of width than a mouldboard plough
Have wider transport widths
Work at a greater depth than primary tillage tools in most soils
Answer and working
A. Must stop to be refilled with seed, fertiliser or spray liquid
Refilling time is a loss that tillage tools do not have. Depth and draft affect power requirement, not field efficiency.
Farm Machinery Management & Economics · Field efficiency and timeliness
5. Induction sealing in packaging is used mainly to
Seal the longitudinal seam of a VFFS bag
Close jute sacks
Double-seam can ends
Seal a foil liner inside a bottle cap onto the container neck
Answer and working
D. Seal a foil liner inside a bottle cap onto the container neck
An induction coil heats the foil in the cap liner, melting its heat-seal coating onto the neck, giving a tamper-evident hermetic seal. VFFS seams use heated jaws; sacks are sewn; cans are double seamed.
Storage Engineering, Material Handling & Packaging · Packaging machines
6. A level basin of 40 m × 25 m is to receive 60 mm. The inflow is 15 L/s. How long is the application time?
6.7 min
4.0 min
667 min
66.7 min
Answer and working
D. 66.7 min
Volume = 40 × 25 × 0.06 = 60 m³; time = 60 / 0.015 = 4,000 s = 66.7 min. 6.7 and 667 min are factor-of-ten slips; 4.0 min divides seconds by 1,000.
7. Curing of onion bulbs before storage is primarily intended to
induce sprouting
increase the pungency of the bulbs before marketing
dry the neck and outer scales into protective skins
raise moisture of the outer scales to keep the bulbs plump
Answer and working
C. dry the neck and outer scales into protective skins
Onion curing dries the neck and outer scales, which seals the bulb against water loss and decay organisms. Sprouting is to be avoided in storage.
Post-Harvest Engineering of Horticultural Crops · Washing, sorting and waxing
8. Why does modified atmosphere packaging of fresh produce depend on a controlled cold chain?
Films melt or lose their seals above about 10 °C, so the pack opens and the gas escapes
Cold kills all microbes in the pack, so any break in the cold chain lets them regrow from zero at once
Nitrogen condenses at room temperature
Respiration rises with temperature faster than film permeability, so a warmed pack can go anaerobic
Answer and working
D. Respiration rises with temperature faster than film permeability, so a warmed pack can go anaerobic
The pack is designed to balance respiration and permeation at one temperature; warming raises O2 demand more than O2 supply, so O2 falls toward anaerobic levels. Films do not melt and nitrogen does not condense at those temperatures.
Storage Engineering, Material Handling & Packaging · Controlled and modified atmosphere storage