LAISHA
Open Laisha

National Technical Qualification — Food Engineer (식품기사) and Food Industrial Engineer (식품산업기사)

South Korea · Human Resources Development Service of Korea (HRDK), Q-Net · unverified source

179practice questions written to this syllabus
20subjects

What National Technical Qualification is

National Technical Qualification — Food Engineer (식품기사) and Food Industrial Engineer (식품산업기사) is a licensing and registration exam run by Human Resources Development Service of Korea (HRDK), Q-Net, for candidates in South Korea.

Format

Written examination followed by a practical examination; graded national technical qualifications.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.

Check the current format, eligibility, fees and dates on the official site: q-net.or.kr.

How it has changed

Widely held by food technologists in Korean industry and public service.

How to prepare for National Technical Qualification

Where our 179 questions for it fall

Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.

  1. Heaviest (53% of the questions): General Microbiology (21); Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer (15); Mechanical Unit Operations: Size Reduction, Mixing & Separation (13); Food Plant Design, Hygienic Engineering, Utilities & Automation (12); New Food Product Development & Formulation (12); Sensory Science & Consumer Research (11); Food Microbiology: Spoilage, Pathogens & Detection (10).

    Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.

  2. Middle band: Bakery, Pasta & Snack Food Technology (10); Human Nutrition & Nutritional Quality of Processed Foods (9); Principles of Food Science & Food Preservation (8); Mathematics for Food Science & Engineering (7); Food Analysis: Proximate, Chemical & Instrumental Methods (7); Physical Properties, Rheology & Texture of Foods (6); Extrusion & Texturisation Technology (6).

    One pass per subject, then mixed sets across them.

  3. Lighter: Food Packaging Science & Technology (6); Shelf-life Science & Food Stability (6); Food Industry Management, Costing & Entrepreneurship (6); Novel & Non-thermal Food Processing Technologies (5); Cereal Science & Milling Technology (5); Food Safety Management Systems: HACCP, PRPs, ISO 22000 & GFSI Schemes (4).

    Definitions, classifications and standard figures; quick to revise, easy marks to lose.

  4. Hardest share: Food Packaging Science & Technology (4 hard of 6), Shelf-life Science & Food Stability (4 hard of 6), Novel & Non-thermal Food Processing Technologies (3 hard of 5).

    Leave untimed time for these and read every explanation, including for the options you rejected.

Official source: q-net.or.kr

8 practice questions, worked

Original questions written to this exam's published syllabus and pattern. Not past papers.

1. A thermal process validated by heat-penetration tests in a pilot retort is moved to a production retort. What is required?

  1. Revalidate heat distribution and penetration at full scale
  2. Halve the process time, because larger retorts always heat faster
  3. Accept the process if the first production batch shows no visible spoilage
  4. Nothing, because a process validated at pilot scale is valid in any retort
Answer and working

A. Revalidate heat distribution and penetration at full scale

Heat distribution and come-up differ between retorts, so temperature distribution and heat-penetration studies are repeated at full scale. Larger loads often heat more slowly, and the absence of visible spoilage does not demonstrate sterility.

Food Plant Design, Hygienic Engineering, Utilities & Automation · Scale-up and pilot plants

2. Carcass weight loss during chilling can be reduced by

  1. raising air velocity and lowering the humidity throughout the whole chilling period
  2. lowering air velocity and raising humidity once the surface is cool
  3. heating the carcass surface to dry it quickly
  4. spraying the carcass with oil before chilling
Answer and working

B. lowering air velocity and raising humidity once the surface is cool

Evaporation rate rises with km (air velocity) and the vapour-concentration difference; spray chilling and humid air reduce it.

Transport Phenomena in Food Processing: Fluid Flow, Heat & Mass Transfer · Convective mass transfer

3. A dairy's skim milk contains too much fat after separation. A likely cause is

  1. feeding the separator faster than its rated capacity
  2. separating at a slightly higher temperature within the normal range
  3. using a newly cleaned bowl
  4. reducing the feed rate
Answer and working

A. feeding the separator faster than its rated capacity

Overfeeding shortens residence time so small globules escape; cold milk and fouled discs also raise skim fat.

Mechanical Unit Operations: Size Reduction, Mixing & Separation · Centrifugation and centrifugal separators

4. A simulated test market:

  1. Replaces all consumer research
  2. Sells the product in a whole country
  3. Forecasts sales with models
  4. Tests packaging only
Answer and working

C. Forecasts sales with models

Faster and cheaper than city tests.

New Food Product Development & Formulation · Test marketing and commercial launch

5. An inoculating loop is correctly sterilised by:

  1. Dipping in 70% ethanol and using it while wet
  2. Rinsing in sterile water between samples
  3. Wiping with a dry tissue between each transfer
  4. Flaming until red hot, then cooling it briefly
Answer and working

D. Flaming until red hot, then cooling it briefly

Flaming to red heat incinerates organisms; the loop must cool so it does not kill the inoculum. Ethanol does not kill spores.

General Microbiology · Aseptic technique and laboratory biosafety

6. Ham sandwiches prepared by a worker with a boil on his hand were left at room temperature for 5 hours. Diners vomited 2 hours after eating. Why did toasting the sandwiches just before serving fail to prevent illness?

  1. Toasting raises the water activity of ham and speeds toxin release
  2. Heat activates staphylococcal spores, which then produce toxin quickly
  3. Toasting is too brief to kill vegetative cells of Staphylococcus aureus
  4. Staphylococcal enterotoxins are heat-stable and survive the heating
Answer and working

D. Staphylococcal enterotoxins are heat-stable and survive the heating

S. aureus is killed by heat, but its enterotoxins are heat-stable. S. aureus does not form spores.

Food Microbiology: Spoilage, Pathogens & Detection · Spore-formers and toxin producers: Clostridium botulinum, C. perfringens, Bacillus cereus and Staphylococcus aureus

7. On Baird-Parker agar, typical colonies of Staphylococcus aureus are:

  1. Blue-green with an opaque halo
  2. Black and shiny with a clear zone
  3. Red with black centres
  4. Pink with a lecithinase precipitate
Answer and working

B. Black and shiny with a clear zone

Tellurite reduction gives black colonies, and egg-yolk clearing gives the zone. Pink with precipitate is B. cereus on MYP; red with black centres is Salmonella on XLD; blue-green with halo is L. monocytogenes on ALOA.

Food Microbiology: Spoilage, Pathogens & Detection · Spore-formers and toxin producers: Clostridium botulinum, C. perfringens, Bacillus cereus and Staphylococcus aureus

8. 100 kg of vegetable at 80% moisture (wet basis) is dried to 10% moisture. How much water is removed?

  1. 22.2 kg
  2. 77.8 kg
  3. 80.0 kg
  4. 70.0 kg
Answer and working

B. 77.8 kg

Solids = 20 kg; final mass = 20/0.90 = 22.2 kg; water removed = 100 − 22.2 = 77.8 kg. 70 kg subtracts the percentages; 22.2 kg is the dried product mass.

Principles of Food Science & Food Preservation · Preservation by removal of water: drying, concentration and intermediate-moisture foods

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock all 179 questions — National Technical Qualification — Food Engineer (식품기사) and Food Industrial Engineer (식품산업

US$10 a month · one price worldwide · cancel any time

  • Every practice question for this course, with explanations
  • Timed papers for the exams this course leads to
  • Ask Laisha to explain any topic — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.