LAISHA
Open Laisha

ASRB NET Response Surface, Mixture & Optimal Designs: practice questions

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
92written to this exam in this subject
9syllabus units

About ASRB NET

ASRB NET - Agricultural Statistics (and Computer Application / Bioinformatics) is a professional certification run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. NET: one objective paper of about 150 questions, 2 hours, negative marking, online, Master's level (pattern as reported for other disciplines).

Official site: asrb.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Response Surface, Mixture & Optimal Designs in ASRB NET

Second-order designs (CCD, Box-Behnken), rotatability, canonical analysis, fertiliser response and optimum dose, mixture designs and optimality criteria.

Finding the best dose or combination: first- and second-order response surfaces, central composite and Box-Behnken designs, rotatability, fertiliser response optimisation, mixture designs for blends and feed formulations, and the alphabetic optimality criteria.

Our 92 ASRB NET questions in this subject: 21 easy, 50 medium, 21 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB NET and are not shown on any other exam's page.

Question 1 · hard

A CCD is run over two seasons with factorial and axial blocks. What remains a risk even with orthogonal blocking?

  1. Season x factor interactions inflating the residual
  2. Loss of all centre points in the second season
  3. Bias in the polynomial coefficients from the season main effect
  4. Impossibility of estimating quadratic terms
Answer and working

A. Season x factor interactions inflating the residual

Orthogonal blocking protects against the season main effect, not against interactions with season.

Question 2 · medium

The eigenvalues of B are -3.0 and +1.2. What does this indicate?

  1. A minimum
  2. A rising ridge
  3. A saddle point
  4. A maximum
Answer and working

C. A saddle point

Mixed signs mean the response rises in one direction and falls in another.

Question 3 · easy

For y = 2000 + 30x - 0.1x^2, at what rate is yield maximum?

  1. 300
  2. 75
  3. 150
  4. 67
Answer and working

C. 150

x_max = b/(2c) = 30/0.2 = 150 kg/ha.

Question 4 · medium

What does E-optimality maximise?

  1. The number of design points
  2. The smallest eigenvalue of X'X
  3. The average prediction variance
  4. The determinant of X'X
Answer and working

B. The smallest eigenvalue of X'X

It minimises the variance of the worst-estimated linear combination of parameters.

Question 5 · medium

Which criterion suits an experiment whose purpose is prediction over the whole region?

  1. E-optimality
  2. Rotatability only
  3. Resolution III
  4. I-optimality
Answer and working

D. I-optimality

I-optimality minimises average prediction variance over the region.

Question 6 · hard

Some earlier screening runs exist. How can a new response surface study use them?

  1. Augment optimally, blocking the phases
  2. Discard them and start a completely new design from scratch
  3. Use them only to estimate pure error
  4. Treat them as centre points only
Answer and working

A. Augment optimally, blocking the phases

Optimal augmentation chooses new runs that complement existing ones; a block guards against changes between phases.

Question 7 · medium

What should be checked before running a computer-generated design?

  1. Only the D-efficiency value printed by the design software
  2. Prediction variance, term correlations and lack-of-fit df
  3. Only the number of centre points in the design
  4. Only that every run uses extreme factor levels
Answer and working

B. Prediction variance, term correlations and lack-of-fit df

Optimality on one criterion does not guarantee good practical properties.

Question 8 · hard

A potting medium has soil at least 30%, compost 10-50% and sand at most 40%. What kind of region results?

  1. A single point
  2. An irregular polygon inside the simplex
  3. A full equilateral triangle
  4. A cube in proportion space
Answer and working

B. An irregular polygon inside the simplex

Bounds cut the simplex into a polytope, calling for vertex-based or optimal designs.

Question 9 · easy

In coded units, what are the factorial levels of a 2^k design?

  1. -1 and +1
  2. 1 and 2
  3. 0 and 1
  4. -2 and +2
Answer and working

A. -1 and +1

Coding centres the region at zero with half-range one.

Question 10 · easy

What shape is the experimental region for three mixture components?

  1. A circle
  2. A cube
  3. A triangle
  4. A square
Answer and working

C. A triangle

Proportions summing to one form a two-dimensional simplex, which is a triangle.

A study plan for Response Surface, Mixture & Optimal Designs in ASRB NET

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (36% of the 92 questions): Canonical analysis and the method of steepest ascent (11, 12%); Central composite and Box-Behnken designs (11, 12%); Fertiliser response functions and economic optimum dose (11, 12%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: First-order and second-order response surface models (11, 12%); Mixture experiments: simplex lattice and simplex centroid designs (11, 12%); Rotatability and orthogonal blocking (11, 12%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Optimality criteria: A-, D-, E- and G-optimality (10, 11%); Taguchi and robust parameter designs (introduction) (9, 10%); Computer-generated optimal designs (7, 8%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Optimality criteria: A-, D-, E- and G-optimality (3 hard of 10), Computer-generated optimal designs (2 hard of 7), Canonical analysis and the method of steepest ascent (3 hard of 11).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: First-order and second-order response surface models (4 easy of 11); Taguchi and robust parameter designs (introduction) (3 easy of 9).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB NET Response Surface, Mixture & Optimal Designs

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.