LAISHA
Open Laisha

ASRB Agricultural Research Service Response Surface, Mixture & Optimal Designs: practice questions

ASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
79written to this exam in this subject
9syllabus units

About ASRB Agricultural Research Service

ASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist is a government recruitment exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. Combined NET/ARS/SMS/STO recruitment: preliminary (objective), mains (descriptive, discipline paper) and interview for ARS.

Official site: asrb.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Response Surface, Mixture & Optimal Designs in ASRB Agricultural Research Service

Finding the best dose or combination: first- and second-order response surfaces, central composite and Box-Behnken designs, rotatability, fertiliser response optimisation, mixture designs for blends and feed formulations, and the alphabetic optimality criteria.

Our 79 ASRB Agricultural Research Service questions in this subject: 15 easy, 45 medium, 19 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB Agricultural Research Service and are not shown on any other exam's page.

Question 1 · medium

Why are centre points added to a 2^k design?

  1. To make the design rotatable at any alpha
  2. To replace the factorial points entirely
  3. To estimate every quadratic coefficient separately
  4. For pure error and a curvature test
Answer and working

D. For pure error and a curvature test

Replicated centre runs estimate pure error and, compared with factorial means, test overall curvature; they cannot tell which factor is curved.

Question 2 · hard

A 2^2 factorial has mean 40.0 at its four corners; 5 centre points have mean 44.0 and SD 1.5. What is the t statistic for curvature?

  1. 3.77
  2. 3.98
  3. 5.96
  4. 2.67
Answer and working

B. 3.98

SE = s sqrt(1/4 + 1/5) = 1.006; t = 4.0/1.006 = 3.98 on 4 df.

Question 3 · easy

Who introduced response surface methodology?

  1. Eberhart and Russell
  2. Neyman and Pearson
  3. Box and Wilson
  4. Fisher and Yates
Answer and working

C. Box and Wilson

Box and Wilson (1951) introduced RSM for chemical process optimisation.

Question 4 · easy

What is the rotatable axial distance alpha for a CCD with a full 2^2 factorial?

  1. 2.000
  2. 1.682
  3. 1.000
  4. 1.414
Answer and working

D. 1.414

alpha = F^(1/4) = 4^(1/4) = 1.414. The square root of F, or alpha = 1 (face-centred), are not rotatable.

Question 5 · medium

What does rotatability mean?

  1. The design can be rotated by 90 degrees only
  2. Blocks are orthogonal to the model terms
  3. Every factor has the same number of levels in the whole design
  4. Prediction variance depends only on distance from the centre
Answer and working

D. Prediction variance depends only on distance from the centre

Equal prediction precision in all directions at the same distance is rotatability.

Question 6 · medium

Why include several centre points in a rotatable CCD?

  1. To make alpha equal to one
  2. To remove the need for any axial points in the design
  3. To stabilise variance near the centre
  4. To estimate the block effects
Answer and working

C. To stabilise variance near the centre

Too few centre points make variance larger at the centre; uniform-precision numbers stabilise it.

Question 7 · hard

y = 50 + 2x1 + 3x2 - x1^2 - 2x2^2 + x1x2. What is the x1 coordinate of the stationary point?

  1. 1.00
  2. 0.75
  3. 1.57
  4. 2.00
Answer and working

C. 1.57

x_s = -(1/2)B^(-1)b with B = [[-1, 0.5], [0.5, -2]], b = (2, 3), giving (1.57, 1.14).

Question 8 · medium

Why is a rounded fertiliser recommendation near the economic optimum usually acceptable?

  1. Fertiliser prices never change from year to year
  2. Yield response is always linear near the optimum
  3. Statistical estimates of the optimum are exact
  4. The profit curve is flat near its maximum
Answer and working

D. The profit curve is flat near its maximum

Small departures from the optimum cost little profit, and the estimate is uncertain anyway.

Question 9 · hard

What does the Kiefer-Wolfowitz equivalence theorem state?

  1. D- and G-optimality coincide for continuous designs
  2. Optimal designs never need centre points
  3. Every rotatable design is D-optimal
  4. A- and E-optimality coincide for all designs
Answer and working

A. D- and G-optimality coincide for continuous designs

For approximate designs, D-optimal designs are G-optimal, with maximum standardised prediction variance p.

Question 10 · medium

Which agricultural problem reflects robust-design thinking?

  1. Removing all replicates from a trial
  2. Testing a single variety at one site
  3. Practices whose yield varies little with weather
  4. Choosing the plot with the highest yield last year
Answer and working

C. Practices whose yield varies little with weather

Weather is a noise factor; practices insensitive to it are robust.

A study plan for Response Surface, Mixture & Optimal Designs in ASRB Agricultural Research Service

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (42% of the 79 questions): Canonical analysis and the method of steepest ascent (11, 14%); Central composite and Box-Behnken designs (11, 14%); Mixture experiments: simplex lattice and simplex centroid designs (11, 14%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: First-order and second-order response surface models (10, 13%); Rotatability and orthogonal blocking (10, 13%); Optimality criteria: A-, D-, E- and G-optimality (9, 11%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Taguchi and robust parameter designs (introduction) (9, 11%); Computer-generated optimal designs (7, 9%); Fertiliser response functions and economic optimum dose (1, 1%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Optimality criteria: A-, D-, E- and G-optimality (3 hard of 9), Rotatability and orthogonal blocking (3 hard of 10), Computer-generated optimal designs (2 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Taguchi and robust parameter designs (introduction) (3 easy of 9); First-order and second-order response surface models (3 easy of 10).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB Agricultural Research Service Response Surface, Mixture & Optimal Designs

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.