LAISHA
Open Laisha

ASRB Agricultural Research Service Statistical Quality Control & Reliability: practice questions

ASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist · India · Agricultural Scientists Recruitment Board (ICAR)

Original practice questions written to the published syllabus · not past papers
10worked here, free
35written to this exam in this subject
10syllabus units

About ASRB Agricultural Research Service

ASRB Agricultural Research Service (ARS) - Agricultural Statistics scientist is a government recruitment exam run by Agricultural Scientists Recruitment Board (ICAR), for candidates in India. Combined NET/ARS/SMS/STO recruitment: preliminary (objective), mains (descriptive, discipline paper) and interview for ARS.

Official site: asrb.org.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Quality Control & Reliability in ASRB Agricultural Research Service

Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.

Our 35 ASRB Agricultural Research Service questions in this subject: 2 easy, 25 medium, 8 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ASRB Agricultural Research Service and are not shown on any other exam's page.

Question 1 · medium

A dairy's fat chart signals constantly after the season changes, though nothing in the plant has changed. What is a sensible response?

  1. Treat every signal as a plant fault
  2. Adjust for the raw-material input
  3. Stop charting during that season
  4. Widen limits to 6 sigma permanently
Answer and working

B. Adjust for the raw-material input

The input (milk composition) changed; charting output adjusted for known input effects separates plant problems from raw-material variation.

Question 2 · medium

Weed-seed counts cluster, with variance well above the mean. What happens with Poisson-based c chart limits?

  1. Too narrow: false alarms
  2. They become negative
  3. They are exact
  4. They are too wide, missing contamination
Answer and working

A. Too narrow: false alarms

Overdispersion makes real variation exceed √c̄; empirical or negative-binomial limits are needed.

Question 3 · hard

Defects occur at about 1 per 1,000 units. Why are charts of units between defects preferred to c charts on subgroups of 100?

  1. Most subgroups show zero defects
  2. Units-between-defects charts need no data
  3. c charts require normality
  4. c charts cannot handle rare events by law
Answer and working

A. Most subgroups show zero defects

With c̄ = 0.1, nearly every point is 0; geometric (g) charts of counts between events detect rate changes far better.

Question 4 · easy

A filler has specifications 98-102 g and σ = 0.5 g. What is Cp?

  1. 0.67
  2. 1.33
  3. 4.00
  4. 1.00
Answer and working

B. 1.33

Cp = (102 − 98)/(6 × 0.5) = 1.33.

Question 5 · medium

A filler has specifications 98-102 g, mean 100.5 g and σ = 0.5 g. What is Cpk?

  1. 1.00
  2. 1.67
  3. 1.33
  4. 0.50
Answer and working

A. 1.00

Cpk = min(1.5/1.5, 2.5/1.5) = 1.00; 1.67 uses the farther limit; 1.33 is Cp, which ignores centring.

Question 6 · medium

A sample Cpk of 1.33 is computed from 50 observations. What is the main caution?

  1. It cannot exceed 1
  2. It must be multiplied by √50
  3. It is exact for any sample size
  4. Its lower bound is near 1.1
Answer and working

D. Its lower bound is near 1.1

Estimated indices have sizeable sampling error; contracts should specify sample sizes or confidence bounds.

Question 7 · medium

A variables plan for grain moisture (upper limit 14%, known σ = 0.5%) uses n = 10 and k = 1.8. A sample mean is 13.3%. What is the decision?

  1. Reject, since 13.3 > 14 − 1.8 × 0.5 = 13.1
  2. Accept, since (14 − 13.3)/0.5 = 1.4 > 1
  3. Accept, since 13.3 < 14
  4. Take a second sample
Answer and working

A. Reject, since 13.3 > 14 − 1.8 × 0.5 = 13.1

(U − x̄)/σ = 0.7/0.5 = 1.4 < k = 1.8, so reject; being below the specification limit is not enough.

Question 8 · medium

A supplier complains that a lot was rejected though no sampled item exceeded the limit. Under which plan type can this happen?

  1. A double attribute plan
  2. A variables plan
  3. An attribute plan with c = 0
  4. A c chart
Answer and working

B. A variables plan

Variables plans reject when x̄ is too close to the limit relative to σ, even if every item conforms.

Question 9 · medium

Germination testing is destructive and slow. Why might a variables approach be attractive if a suitable continuous measure exists?

  1. It always accepts more lots
  2. It removes the need for any standard
  3. It avoids sampling altogether
  4. Fewer items are needed
Answer and working

D. Fewer items are needed

Fewer test units cut destructive testing cost, provided the measure is approximately normal.

Question 10 · easy

What do the letters of DMAIC stand for?

  1. Define, Measure, Analyse, Improve, Control
  2. Detect, Measure, Accept, Improve, Certify
  3. Define, Model, Assess, Implement, Check
  4. Design, Monitor, Adjust, Inspect, Correct
Answer and working

A. Define, Measure, Analyse, Improve, Control

DMAIC is the Six Sigma improvement cycle.

A study plan for Statistical Quality Control & Reliability in ASRB Agricultural Research Service

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (57% of the 35 questions): Process capability indices (6, 17%); Six Sigma and design for quality (introduction) (6, 17%); Chance and assignable causes of variation (4, 11%); Control charts for attributes: p, np, c and u charts (4, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Acceptance sampling by attributes: single, double and sequential plans (3, 9%); Acceptance sampling by variables (3, 9%); CUSUM and EWMA charts (3, 9%); Control charts for variables: X-bar, R and s charts (2, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: OC, AOQ, AOQL, ASN and ATI curves (2, 6%); Reliability: hazard rate, series and parallel systems, life testing (2, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: OC, AOQ, AOQL, ASN and ATI curves (2 hard of 2), Control charts for attributes: p, np, c and u charts (2 hard of 4), Acceptance sampling by attributes: single, double and sequential plans (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Process capability indices (1 easy of 6); Six Sigma and design for quality (introduction) (1 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ASRB Agricultural Research Service Statistical Quality Control & Reliability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.