LAISHA
Open Laisha

SSC Combined Graduate Level Statistical Quality Control & Reliability: practice questions

SSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator · India · Staff Selection Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
28written to this exam in this subject
9syllabus units

About SSC Combined Graduate Level

SSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator is a government recruitment exam run by Staff Selection Commission, for candidates in India. Multi-tier computer-based exam; candidates for Junior Statistical Officer and Statistical Investigator posts take an additional statistics paper.

Official site: ssc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Quality Control & Reliability in SSC Combined Graduate Level

Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.

Our 28 SSC Combined Graduate Level questions in this subject: 14 easy, 14 medium, 0 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to SSC Combined Graduate Level and are not shown on any other exam's page.

Question 1 · easy

For a normally distributed statistic, what is the probability of a point falling outside 3-sigma limits when the process is in control?

  1. 0.05
  2. 0.0027
  3. 0.01
  4. 0.0013
Answer and working

B. 0.0027

2[1 − Φ(3)] = 0.0027; 0.0013 is one tail only.

Question 2 · medium

Seed lots of 200 seeds average 4% abnormal seedlings. What are the p chart limits?

  1. −0.0016 to 0.0816
  2. 0 to 0.0539
  3. 0 to 0.628
  4. 0 to 0.0816
Answer and working

D. 0 to 0.0816

p̄ ± 3√[p̄(1 − p̄)/n] = 0.04 ± 0.0416; the negative lower limit is set to 0. Omitting n gives a meaningless upper limit; 0.0539 uses 1-sigma limits.

Question 3 · easy

Which chart suits counts of blemishes per tray when the number of fruits per tray varies?

  1. np chart
  2. R chart
  3. c chart
  4. u chart
Answer and working

D. u chart

u = defects per unit with limits ū ± 3√(ū/nᵢ) handles varying inspection amounts; the c chart needs a constant unit.

Question 4 · medium

A plan n = 50, c = 1 is applied to large lots that are 2% off-type. What is the probability of acceptance?

  1. 0.736
  2. 0.364
  3. 0.980
  4. 0.372
Answer and working

A. 0.736

P(d ≤ 1) = 0.98⁵⁰ + 50(0.02)(0.98)⁴⁹ = 0.364 + 0.372 = 0.736. 0.364 counts d = 0 only.

Question 5 · easy

In acceptance sampling, what is the producer's risk?

  1. The cost of inspection
  2. The probability of rejecting a lot of AQL quality
  3. The fraction defective in accepted lots
  4. The probability of accepting a lot of LTPD quality
Answer and working

B. The probability of rejecting a lot of AQL quality

Producer's risk α is the chance a good (AQL) lot is rejected; accepting a bad (LTPD) lot is the consumer's risk β.

Question 6 · easy

Which distribution gives exact acceptance probabilities for a small isolated lot sampled without replacement?

  1. Binomial
  2. Normal
  3. Hypergeometric
  4. Poisson
Answer and working

C. Hypergeometric

Sampling without replacement from N items with D defectives is hypergeometric; binomial and Poisson approximate it for large lots.

Question 7 · medium

Subgroups of 5 give s̄ = 0.30 kg; c₄ = 0.940. What is σ̂?

  1. 0.319 kg
  2. 0.300 kg
  3. 0.129 kg
  4. 0.282 kg
Answer and working

A. 0.319 kg

σ̂ = s̄/c₄ = 0.30/0.940 = 0.319; dividing by d₂ applies the range constant to s.

Question 8 · easy

A centred process has Cp = 2. How far is each specification limit from the mean?

  1. 2σ
  2. 3σ
  3. 6σ
  4. 12σ
Answer and working

C. 6σ

Cp = (USL − LSL)/6σ = 2 gives a width of 12σ, i.e. 6σ each side.

Question 9 · medium

What is the consumer's risk in acceptance sampling?

  1. Rejecting a lot of AQL quality
  2. Inspecting the whole lot
  3. Losing a supplier
  4. Accepting a lot of LTPD quality
Answer and working

D. Accepting a lot of LTPD quality

β = P(accept | p = LTPD); α concerns rejecting AQL lots.

Question 10 · medium

A process with specification limits at ±6σ and no mean shift has about what defect rate?

  1. 2,700 per million
  2. 0.002 per million
  3. 63 per million
  4. 3.4 per million
Answer and working

B. 0.002 per million

2[1 − Φ(6)] ≈ 2 × 10⁻⁹, i.e. 0.002 ppm; 3.4 ppm assumes the conventional 1.5σ shift.

A study plan for Statistical Quality Control & Reliability in SSC Combined Graduate Level

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (54% of the 28 questions): Acceptance sampling by attributes: single, double and sequential plans (5, 18%); Control charts for attributes: p, np, c and u charts (5, 18%); OC, AOQ, AOQL, ASN and ATI curves (5, 18%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Reliability: hazard rate, series and parallel systems, life testing (4, 14%); Chance and assignable causes of variation (3, 11%); Control charts for variables: X-bar, R and s charts (3, 11%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: CUSUM and EWMA charts (1, 4%); Process capability indices (1, 4%); Six Sigma and design for quality (introduction) (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Chance and assignable causes of variation (3 easy of 3); Process capability indices (1 easy of 1).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — SSC Combined Graduate Level Statistical Quality Control & Reliability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.