LAISHA
Open Laisha

SSC Combined Graduate Level Statistical Methods for Agricultural Sciences: practice questions

SSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator · India · Staff Selection Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
88written to this exam in this subject
14syllabus units

About SSC Combined Graduate Level

SSC Combined Graduate Level - Junior Statistical Officer / Statistical Investigator is a government recruitment exam run by Staff Selection Commission, for candidates in India. Multi-tier computer-based exam; candidates for Junior Statistical Officer and Statistical Investigator posts take an additional statistics paper.

Official site: ssc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Methods for Agricultural Sciences in SSC Combined Graduate Level

The first statistics course of every agricultural degree, which is also the statistics unit of AIEEA-PG Group 07: frequency distributions, averages and dispersion, probability and the three named distributions, tests of significance, correlation and regression, and the CRD and RBD. Laisha teaches it to the depth the entrance examines; the Veterinary, Agribusiness and Agricultural Engineering tracks have their own introductory versions.

Our 88 SSC Combined Graduate Level questions in this subject: 36 easy, 45 medium, 7 hard, across 14 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to SSC Combined Graduate Level and are not shown on any other exam's page.

Question 1 · easy

The number of tillers per rice hill is an example of which kind of variable?

  1. A continuous quantitative variable measured on an interval
  2. A qualitative attribute recorded on a nominal scale
  3. A ratio of two continuous measurements on each hill
  4. A discrete quantitative variable
Answer and working

D. A discrete quantitative variable

Tillers are counted, so the variable takes only whole-number values: discrete. Plant height or grain weight would be continuous; variety name would be a qualitative attribute.

Question 2 · medium

Average district yields are 2.0, 3.0 and 4.0 t/ha on 100, 300 and 600 thousand hectares respectively. What is the regional average yield?

  1. 3.00 t/ha
  2. 3.33 t/ha
  3. 3.50 t/ha
  4. 2.90 t/ha
Answer and working

C. 3.50 t/ha

Regional yield = total production/total area = (2 × 100 + 3 × 300 + 4 × 600)/1000 = 3.50 t/ha, an area-weighted mean. 3.00 is the unweighted mean of district yields, which treats a small district as equal to a large one.

Question 3 · easy

P(A) = 0.5, P(B) = 0.4 and P(A ∩ B) = 0.2 for two events on a farm. What is P(A ∪ B)?

  1. 0.9
  2. 0.7
  3. 0.2
  4. 0.5
Answer and working

B. 0.7

P(A ∪ B) = P(A) + P(B) − P(A ∩ B) = 0.5 + 0.4 − 0.2 = 0.7. 0.9 forgets to subtract the overlap, which is counted twice.

Question 4 · medium

Counts of mites per leaf from 200 leaves have mean 1.8 and variance 4.6. What does this suggest about their distribution?

  1. Clumping, with the counts over-dispersed relative to a Poisson
  2. A random pattern that a Poisson distribution would fit well
  3. A regular pattern that the positive binomial would fit better
  4. A normal pattern, since the sample has as many as 200 leaves
Answer and working

A. Clumping, with the counts over-dispersed relative to a Poisson

For a Poisson the variance equals the mean. A variance much larger than the mean shows aggregation (clumping), commonly fitted by the negative binomial. A variance below the mean would suggest regularity.

Question 5 · medium

In a large survey, 40% of 600 sampled farmers use certified seed. What is the standard error of this proportion?

  1. 0.020
  2. 0.016
  3. 0.400
  4. 0.024
Answer and working

A. 0.020

SE = √(pq/n) = √(0.4 × 0.6/600) = √0.0004 = 0.020. 0.016 = √(0.24/1000) uses the wrong n; 0.024 is pq/10.

Question 6 · medium

A sample of 64 farms has mean yield 2.45 t/ha with SD 0.40 t/ha. Test H₀: μ = 2.30 t/ha. What is the value of Z?

  1. 0.38
  2. 0.05
  3. 2.30
  4. 3.00
Answer and working

D. 3.00

Z = (x̄ − μ₀)/(s/√n) = 0.15/(0.40/8) = 0.15/0.05 = 3.00, which exceeds 2.576, so the difference is significant at 1%. 0.38 divides by the SD instead of the SE.

Question 7 · medium

Nine cows on a new ration give mean daily yield 52 L with sample SD 3 L (divisor n − 1). Test H₀: μ = 50 L. What is t and its df?

  1. t = 2.00 with 8 df
  2. t = 0.67 with 8 df
  3. t = 2.00 with 9 df
  4. t = 6.00 with 8 df
Answer and working

A. t = 2.00 with 8 df

t = (52 − 50)/(3/√9) = 2/1 = 2.00 with n − 1 = 8 df. 0.67 divides by the SD rather than the SE; 9 df forgets that one df is used by the mean.

Question 8 · medium

Of 100 seed-treated plots, 20 show disease; of 100 untreated plots, 40 show disease. What is the (uncorrected) χ² for independence of treatment and disease?

  1. 4.76
  2. 20.00
  3. 3.84
  4. 9.52
Answer and working

D. 9.52

χ² = N(ad − bc)²/[(a + b)(c + d)(a + c)(b + d)] = 200(1200 − 3200)²/(100 × 100 × 60 × 140) = 9.52 with 1 df, above 3.841, so disease depends on treatment. 3.84 is the critical value, not the statistic.

Question 9 · medium

The correlation between two traits is 0.8. What proportion of the variance of one is explained by its linear regression on the other?

  1. 64%
  2. 80%
  3. 89%
  4. 40%
Answer and working

A. 64%

The coefficient of determination r² = 0.64, so 64% is explained. 80% confuses r with r²; 89% is √0.8.

Question 10 · easy

An RBD has 6 treatments in 4 blocks. How many error degrees of freedom are there?

  1. 18
  2. 20
  3. 23
  4. 15
Answer and working

D. 15

Error df = (t − 1)(r − 1) = 5 × 3 = 15. 18 = N − t is the CRD value; 23 is total df.

A study plan for Statistical Methods for Agricultural Sciences in SSC Combined Graduate Level

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (45% of the 88 questions): Measures of central tendency: arithmetic, geometric and harmonic means, median and mode (10, 11%); Binomial, Poisson and normal distributions in agricultural data (9, 10%); Basic principles of experimental design, ANOVA, CRD and RBD (7, 8%); Correlation and regression and their tests of significance (7, 8%); Statistics: definition, uses and limitations; frequency distributions and curves (7, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Chi-square tests for goodness of fit and independence of attributes (6, 7%); Large-sample (SND) tests for one and two means (6, 7%); Measures of dispersion: range, mean deviation, quartile deviation, variance and coefficient of variation (6, 7%); Probability: addition and multiplication laws, conditional probability and Bayes' theorem (6, 7%); Random sampling and standard error (6, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Skewness, kurtosis and moments (5, 6%); Tests of significance: errors, null hypothesis and level of significance (5, 6%); F-test for equality of variances (4, 5%); Student's t-test: one sample, two samples and paired (4, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Student's t-test: one sample, two samples and paired (1 hard of 4), Binomial, Poisson and normal distributions in agricultural data (2 hard of 9), Large-sample (SND) tests for one and two means (1 hard of 6).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Tests of significance: errors, null hypothesis and level of significance (3 easy of 5); Basic principles of experimental design, ANOVA, CRD and RBD (4 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — SSC Combined Graduate Level Statistical Methods for Agricultural Sciences

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.