LAISHA
Open Laisha

CUET-PG Statistical Quality Control & Reliability: practice questions

CUET-PG - Statistics · India · National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
63written to this exam in this subject
10syllabus units

About CUET-PG

CUET-PG - Statistics is a postgraduate admission exam run by National Testing Agency, for candidates in India. Computer-based MCQ test used by central and participating universities for MSc Statistics admission.

Official site: exams.nta.ac.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Quality Control & Reliability in CUET-PG

Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.

Our 63 CUET-PG questions in this subject: 20 easy, 39 medium, 4 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

Question 1 · easy

A worn filling nozzle shifts bag weights upward. What kind of cause of variation is this?

  1. A common cause
  2. An assignable cause
  3. Measurement noise
  4. A chance cause
Answer and working

B. An assignable cause

It is an identifiable, removable disturbance; chance (common) causes are the many small inherent sources of variation.

Question 2 · medium

Only one moisture reading per batch is available. Which chart is used?

  1. Individuals and moving-range charts
  2. s chart
  3. X̄ and R chart with n = 1
  4. p chart
Answer and working

A. Individuals and moving-range charts

With n = 1 no within-subgroup range exists; the moving range of successive values estimates σ (MR̄/1.128).

Question 3 · easy

Subgroups of constant size n = 100 are inspected; the average number defective is 5. What is the np chart UCL?

  1. 8.00
  2. 11.71
  3. 11.54
  4. 0.115
Answer and working

C. 11.54

np̄ + 3√[np̄(1 − p̄)] = 5 + 3√4.75 = 11.54. 11.71 uses the Poisson variance; 0.115 is the p chart limit.

Question 4 · medium

A dairy laboratory has one fat reading per batch, slightly skewed, and wants to detect slow drifts. Which chart suits it?

  1. A p chart with n = 1
  2. An R chart
  3. An EWMA chart
  4. A c chart
Answer and working

C. An EWMA chart

EWMA averaging makes it robust to mild non-normality and sensitive to small drifts with individual data.

Question 5 · medium

For N = 2,000, n = 50 and P_a = 0.736, what is the average total inspection per lot?

  1. 1485
  2. 1950
  3. 50
  4. 565
Answer and working

D. 565

ATI = n + (1 − P_a)(N − n) = 50 + 0.264 × 1,950 = 565.

Question 6 · medium

Which international standard provides variables plans matched to ISO 2859?

  1. ISO 14001
  2. ISO 3951
  3. ISO 22000
  4. ISO 9001
Answer and working

B. ISO 3951

ISO 3951 covers inspection by variables; ISO 9001 is a management-system standard.

Question 7 · hard

Three identical sensors (reliability 0.9 each) form a 2-out-of-3 system. What is its reliability?

  1. 0.972
  2. 0.900
  3. 0.729
  4. 0.999
Answer and working

A. 0.972

P(at least 2 work) = 3(0.9)²(0.1) + 0.9³ = 0.243 + 0.729 = 0.972.

Question 8 · medium

Sample sizes vary between 150 and 250 seeds on a p chart. How are the limits handled?

  1. Limits are computed for each nᵢ
  2. A c chart is used instead
  3. The largest n sets all limits
  4. One limit for the average n is always exact
Answer and working

A. Limits are computed for each nᵢ

Limits p̄ ± 3√[p̄(1 − p̄)/nᵢ] vary with nᵢ, or a standardised chart is plotted.

Question 9 · medium

Why are CUSUM and EWMA often run alongside a Shewhart chart?

  1. CUSUM needs Shewhart limits to compute K
  2. They catch big jumps
  3. EWMA cannot signal alone
  4. Standards require three charts
Answer and working

B. They catch big jumps

CUSUM/EWMA excel at small shifts; Shewhart charts react fastest to large ones.

Question 10 · medium

Why does AOQ fall again when incoming quality is very poor?

  1. The sample size grows automatically
  2. Poor lots are never inspected
  3. Rejected lots get screened
  4. AOQ cannot fall
Answer and working

C. Rejected lots get screened

With low P_a, rejected lots are rectified, so outgoing quality improves.

A study plan for Statistical Quality Control & Reliability in CUET-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 63 questions): Reliability: hazard rate, series and parallel systems, life testing (9, 14%); Acceptance sampling by attributes: single, double and sequential plans (7, 11%); Control charts for attributes: p, np, c and u charts (7, 11%); Control charts for variables: X-bar, R and s charts (7, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: CUSUM and EWMA charts (7, 11%); Chance and assignable causes of variation (6, 10%); OC, AOQ, AOQL, ASN and ATI curves (6, 10%); Acceptance sampling by variables (5, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Six Sigma and design for quality (introduction) (5, 8%); Process capability indices (4, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Reliability: hazard rate, series and parallel systems, life testing (2 hard of 9), Six Sigma and design for quality (introduction) (1 hard of 5), Acceptance sampling by attributes: single, double and sequential plans (1 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Chance and assignable causes of variation (3 easy of 6); Process capability indices (2 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — CUET-PG Statistical Quality Control & Reliability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.