LAISHA
Open Laisha

Indian Statistical Institute admission tests Statistical Quality Control & Reliability: practice questions

Indian Statistical Institute admission tests (BStat, MStat, JRF in Statistics) · India · Indian Statistical Institute

Original practice questions written to the published syllabus · not past papers
10worked here, free
35written to this exam in this subject
10syllabus units

About Indian Statistical Institute admission tests

Indian Statistical Institute admission tests (BStat, MStat, JRF in Statistics) is a postgraduate admission exam run by Indian Statistical Institute, for candidates in India. Written tests in two parts: an objective mathematics/statistics test and a descriptive subject test, followed by interview for some programmes (reported). JRF selection by written test and interview.

Official site: isical.ac.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Quality Control & Reliability in Indian Statistical Institute admission tests

Monitoring and accepting quality: Shewhart charts for variables and attributes, CUSUM and EWMA charts, process capability, acceptance sampling plans with their OC, AOQ and ATI curves, and reliability models, applied to seed testing, food processing and input quality. The Agricultural Engineering track covers control charts briefly; this is the full subject.

Our 35 Indian Statistical Institute admission tests questions in this subject: 6 easy, 25 medium, 4 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Statistical Institute admission tests and are not shown on any other exam's page.

Question 1 · medium

Only one moisture reading per batch is available. Which chart is used?

  1. Individuals and moving-range charts
  2. s chart
  3. X̄ and R chart with n = 1
  4. p chart
Answer and working

A. Individuals and moving-range charts

With n = 1 no within-subgroup range exists; the moving range of successive values estimates σ (MR̄/1.128).

Question 2 · easy

What shifts are CUSUM and EWMA charts designed to detect better than Shewhart charts?

  1. Large, sudden shifts
  2. Small, sustained shifts
  3. Changes in specification limits
  4. Single isolated outliers
Answer and working

B. Small, sustained shifts

They accumulate information over time; Shewhart charts are best for large, sudden changes.

Question 3 · medium

A CUSUM is designed to detect a shift of δ = 1.5σ. What reference value K is usually chosen?

  1. 3σ
  2. 0.75σ
  3. 0.5σ
  4. 1.5σ
Answer and working

B. 0.75σ

K = δσ/2, half the shift to be detected.

Question 4 · medium

What is the main advantage of a double sampling plan over a single plan with the same OC curve?

  1. A steeper OC curve
  2. Lower producer's risk at every quality
  3. A lower average sample number
  4. No need for a second decision
Answer and working

C. A lower average sample number

Clear-cut lots are decided on the first sample, reducing average inspection, at the cost of variable workload.

Question 5 · hard

Which tables give plans minimising average total inspection for a given LTPD or AOQL under rectifying inspection?

  1. Dodge-Romig tables
  2. Pearson-Hartley charts
  3. ISO 3951
  4. Shewhart tables
Answer and working

A. Dodge-Romig tables

Dodge-Romig plans are designed for rectifying inspection; ISO 3951 is for variables sampling.

Question 6 · medium

Which international standard provides variables plans matched to ISO 2859?

  1. ISO 14001
  2. ISO 3951
  3. ISO 22000
  4. ISO 9001
Answer and working

B. ISO 3951

ISO 3951 covers inspection by variables; ISO 9001 is a management-system standard.

Question 7 · medium

What does robust design seek?

  1. The largest sample size
  2. Insensitivity to noise
  3. Removal of all control factors
  4. The widest specification limits
Answer and working

B. Insensitivity to noise

Taguchi's idea is to choose control-factor settings that make performance stable despite variation in uncontrollable inputs.

Question 8 · hard

Two exponential components with failure rates 0.002 and 0.003 per hour are in series. What is the system MTTF?

  1. 833 hours
  2. 500 hours
  3. 416 hours
  4. 200 hours
Answer and working

D. 200 hours

λ_s = 0.005 per hour, MTTF = 1/0.005 = 200 h. 833 h adds the component MTTFs.

Question 9 · hard

Three identical sensors (reliability 0.9 each) form a 2-out-of-3 system. What is its reliability?

  1. 0.972
  2. 0.900
  3. 0.729
  4. 0.999
Answer and working

A. 0.972

P(at least 2 work) = 3(0.9)²(0.1) + 0.9³ = 0.243 + 0.729 = 0.972.

Question 10 · easy

Which phase of the bathtub curve has a roughly constant hazard?

  1. Infant mortality
  2. Burn-in
  3. Wear-out
  4. Useful life
Answer and working

D. Useful life

Random failures dominate the middle phase, modelled by the exponential.

A study plan for Statistical Quality Control & Reliability in Indian Statistical Institute admission tests

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (57% of the 35 questions): CUSUM and EWMA charts (6, 17%); Acceptance sampling by variables (5, 14%); Reliability: hazard rate, series and parallel systems, life testing (5, 14%); Control charts for variables: X-bar, R and s charts (4, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Six Sigma and design for quality (introduction) (4, 11%); Chance and assignable causes of variation (3, 9%); Process capability indices (3, 9%); Acceptance sampling by attributes: single, double and sequential plans (2, 6%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Control charts for attributes: p, np, c and u charts (2, 6%); OC, AOQ, AOQL, ASN and ATI curves (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Acceptance sampling by attributes: single, double and sequential plans (1 hard of 2), Reliability: hazard rate, series and parallel systems, life testing (2 hard of 5), Six Sigma and design for quality (introduction) (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: CUSUM and EWMA charts (2 easy of 6); Process capability indices (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Statistical Institute admission tests Statistical Quality Control & Reliability

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.