Indian Statistical Institute admission tests (BStat, MStat, JRF in Statistics) · India · Indian Statistical Institute
Original practice questions written to the published syllabus · not past papersIndian Statistical Institute admission tests (BStat, MStat, JRF in Statistics) is a postgraduate admission exam run by Indian Statistical Institute, for candidates in India. Written tests in two parts: an objective mathematics/statistics test and a descriptive subject test, followed by interview for some programmes (reported). JRF selection by written test and interview.
Official site: isical.ac.in.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.
Our 50 Indian Statistical Institute admission tests questions in this subject: 18 easy, 27 medium, 5 hard, across 11 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Statistical Institute admission tests and are not shown on any other exam's page.
H₀ is composite, θ ∈ Θ₀. How is the size of a test with power function π(θ) defined?
B. sup over θ ∈ Θ₀ of π(θ)
The size is the largest Type I error probability over the null set; a test is of level α when its size is at most α. The infimum over the alternative relates to the worst-case power, not the size.
Ten seeds are tested and H₀: p = 0.5 is rejected in favour of p > 0.5 if 9 or more germinate. What is the size of the test?
B. 0.0107
P(X ≥ 9 | p = 0.5) = (10 + 1)/1024 = 0.0107. 0.0098 counts only X = 9; 0.0547 is the size of the rule X ≥ 8. With discrete data the size cannot be exactly 0.05 without randomisation.
Why is the size of a Karlin-Rubin UMP test of H₀: θ ≤ θ₀ attained at θ = θ₀?
A. Its power function is non-decreasing in θ, so the largest null rejection probability is at θ₀
Under MLR the one-sided test's power function increases with θ; so sup over θ ≤ θ₀ of π(θ) = π(θ₀) = α.
The one-sided test 'reject H₀: μ = μ₀ when Z > z_α' is used against the two-sided alternative μ ≠ μ₀. Why is this test biased?
D. For μ < μ₀ its power falls below α
As μ decreases below μ₀, P(Z > z_α) drops below α: the test is less likely to reject when μ < μ₀ than when H₀ is true.
For N(μ, σ²) with both parameters unknown, what are the asymptotic degrees of freedom of −2 log Λ for H₀: μ = μ₀?
A. 1
The full model has 2 free parameters and H₀ leaves 1 (σ²), so r = 1 restriction and −2 log Λ ~ χ²₁ approximately. Here the LRT is in fact the exact two-sided t-test.
Which drawback is specific to the Wald test among the three asymptotic likelihood tests?
D. It is not invariant to reparameterisation of θ
Testing θ = 1 and log θ = 0 by Wald can give different statistics, because the standard error is computed on the chosen scale. The LRT is invariant; all three are asymptotically χ² under H₀ and all extend to several parameters.
In 100 trials there are 60 successes. For H₀: p = 0.5, what are the score and Wald z-statistics?
D. Score 2.00, Wald 2.04
Score uses the null SE √(0.5 × 0.5/100) = 0.05: z = 0.1/0.05 = 2.00. Wald uses √(0.6 × 0.4/100) = 0.0490: z = 2.04. Squared values 4.00 and 4.17 are the χ²₁ forms, not z.
For a one-sided z-test of H₀: μ = μ₀ at level α with known σ and n observations, what is the power at μ₀ + δ (δ > 0)?
C. Φ(δ√n/σ − z_α)
Power = P(X̄ > μ₀ + z_ασ/√n | μ₀ + δ) = P(Z > z_α − δ√n/σ) = Φ(δ√n/σ − z_α). 1 − Φ(...) is β; omitting √n ignores the sample size.
In sample-size formulas, which z value corresponds to a power of 0.80?
A. 0.8416
z_β with β = 0.20 is Φ⁻¹(0.80) = 0.8416. 1.2816 corresponds to 90% power; 1.6449 is z₀.₀₅.
A two-sided z-test at α = 0.05 uses n = 16 with σ = 2. What is its power to detect a true difference δ = 1?
B. 0.516
Power = Φ(δ√n/σ − 1.96) + Φ(−δ√n/σ − 1.96) = Φ(0.04) + Φ(−3.96) = 0.516. Using 1.645 treats the test as one-sided; omitting √n gives 0.072.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.