LAISHA
Open Laisha

State statistical services Statistical Inference II: Testing of Hypotheses & Sequential Analysis: practice questions

State statistical services: Statistical Officer / Assistant Statistical Officer (State PSCs and selection boards) · India · State Public Service Commissions and Subordinate Service Selection Boards

Original practice questions written to the published syllabus · not past papers
10worked here, free
46written to this exam in this subject
10syllabus units

About State statistical services

State statistical services: Statistical Officer / Assistant Statistical Officer (State PSCs and selection boards) is a government recruitment exam run by State Public Service Commissions and Subordinate Service Selection Boards, for candidates in India. Varies by state: usually an objective screening test in statistics and general studies, some with a descriptive paper and interview.

Official site: mospi.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Inference II: Testing of Hypotheses & Sequential Analysis in State statistical services

Two types of error, level of significance, and the z, t, chi-square and F tests applied to agricultural data.

The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.

Our 46 State statistical services questions in this subject: 22 easy, 18 medium, 6 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to State statistical services and are not shown on any other exam's page.

Question 1 · medium

X₁, ..., X₂₅ are iid N(μ, 1). What is the power of the most powerful size-0.05 test of H₀: μ = 0 against H₁: μ = 0.5?

  1. 0.1963
  2. 0.8037
  3. 0.1261
  4. 0.7054
Answer and working

B. 0.8037

Reject when x̄ > 1.645/5 = 0.329. Power = P(Z > (0.329 − 0.5)×5) = Φ(0.5×5 − 1.645) = Φ(0.855) = 0.8037. Forgetting √n gives Φ(−1.145); using 1.96 treats the test as two-sided.

Question 2 · hard

Why is there no UMP test of a one-sided hypothesis about the location θ of a Cauchy distribution based on one observation?

  1. The Cauchy family has a parameter-dependent support (unlike the normal), which rules out all MP tests
  2. The Cauchy distribution has no mean, so no test of its location can be constructed
  3. The likelihood ratio f(x; θ₁)/f(x; θ₀) is not monotone in x, so the MP region depends on θ₁
  4. Its Fisher information is zero, so every test has power equal to its size
Answer and working

C. The likelihood ratio f(x; θ₁)/f(x; θ₀) is not monotone in x, so the MP region depends on θ₁

f(x; θ₁)/f(x; θ₀) rises and then falls back to 1 as x → ±∞, so the MP region against θ₁ is a bounded interval whose location depends on θ₁; no single region is best for all θ₁ > θ₀. Tests do exist; the support is the whole line; information is positive.

Question 3 · easy

Two independent samples of 8 and 13 plots give variances 12 and 4. What is the F-statistic for equality of variances, with its degrees of freedom?

  1. F = 0.333 with (12, 7) df
  2. F = 3.0 with (7, 12) df
  3. F = 1.73 with (7, 12) df
  4. F = 3.0 with (8, 13) df
Answer and working

B. F = 3.0 with (7, 12) df

F = s₁²/s₂² = 12/4 = 3.0 with (n₁ − 1, n₂ − 1) = (7, 12) df. 1.73 is the ratio of standard deviations, not variances.

Question 4 · medium

Germination is 45 of 100 seeds for treated and 30 of 100 for untreated seed. What is the pooled two-proportion z-statistic?

  1. 2.191
  2. 3.098
  3. 2.218
  4. 32.000
Answer and working

A. 2.191

Pooled p̄ = 75/200 = 0.375; SE = √(0.375 × 0.625 × (1/100 + 1/100)) = 0.0685; z = 0.15/0.0685 = 2.191. The unpooled SE gives 2.218; forgetting the two sample sizes gives 3.098.

Question 5 · easy

A sample of 36 plots has mean 52 kg; σ = 6 kg is known. What is the z-statistic for H₀: μ = 50?

  1. 0.33
  2. 12.00
  3. 1.00
  4. 2.00
Answer and working

D. 2.00

z = (52 − 50)/(6/√36) = 2/1 = 2.00. 0.33 divides by σ instead of the standard error; 12.00 multiplies by n instead of √n.

Question 6 · easy

A 95% two-sided confidence interval for a mean difference is 0.1 to 0.5 t/ha. What does the corresponding 5% two-sided test conclude?

  1. It rejects neither, because the interval does not include 0.6
  2. It rejects both a difference of 0 and a difference of 0.3
  3. It rejects a difference of 0 and does not reject a difference of 0.3
  4. It rejects a difference of 0.3 and does not reject a difference of 0
Answer and working

C. It rejects a difference of 0 and does not reject a difference of 0.3

A two-sided level-α test rejects θ₀ exactly when θ₀ lies outside the 1 − α interval: 0 is outside, 0.3 inside.

Question 7 · hard

What kind of confidence bound results from inverting a family of UMP one-sided tests?

  1. A Bayesian credible bound under a flat prior on the parameter
  2. An unbiased bound, but not the most accurate one among all bounds
  3. A uniformly shortest bound, with the smallest expected length for every sample
  4. A uniformly most accurate bound, least likely to cover each false value
Answer and working

D. A uniformly most accurate bound, least likely to cover each false value

Inverting UMP tests gives uniformly most accurate (UMA) confidence bounds: for each false value, the probability of covering it is minimised. Inverting UMPU tests gives UMA unbiased intervals.

Question 8 · medium

Two varieties are to be compared; the plot standard deviation is 0.6 t/ha and a difference of 0.5 t/ha must be detected with two-sided α = 0.05 and power 0.80 (z values 1.96 and 0.8416). How many plots per variety are needed?

  1. 7
  2. 18
  3. 23
  4. 12
Answer and working

C. 23

n = 2(1.96 + 0.8416)²σ²/δ² = 2 × 7.849 × 0.36/0.25 = 22.61, so 23 per variety. Forgetting the factor 2 for two groups gives 12; using 1.645 treats the test as one-sided.

Question 9 · medium

A one-sided z-test at α = 0.05 must detect an increase of 2 units with power 0.90, when σ = 5 (z values 1.645 and 1.2816). How many observations are needed?

  1. 66
  2. 54
  3. 27
  4. 8
Answer and working

B. 54

n = (z_α + z_β)²σ²/δ² = (2.9266)² × 25/4 = 53.53, so 54. Using 1.96 treats the test as two-sided; not squaring gives 8.

Question 10 · easy

With α, power and σ fixed, a trial needs 100 plots to detect a difference δ. How many plots are needed to detect 2δ?

  1. 200
  2. 400
  3. 25
  4. 50
Answer and working

C. 25

n ∝ 1/δ², so doubling δ divides n by 4: 100/4 = 25.

A study plan for Statistical Inference II: Testing of Hypotheses & Sequential Analysis in State statistical services

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (67% of the 46 questions): Tests based on Z, t, chi-square and F distributions (12, 26%); Power and sample-size calculation for common tests (8, 17%); Hypotheses, the two types of error, size and power (7, 15%); Likelihood ratio tests and Wilks' theorem (4, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Monotone likelihood ratio and uniformly most powerful tests (3, 7%); Multiple testing: family-wise error rate and false discovery rate (3, 7%); Neyman-Pearson lemma and most powerful tests (3, 7%); Relation between tests and confidence intervals (2, 4%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Unbiased tests and UMPU tests for exponential families (2, 4%); Wald and score (Rao) tests (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Monotone likelihood ratio and uniformly most powerful tests (2 hard of 3), Relation between tests and confidence intervals (1 hard of 2), Unbiased tests and UMPU tests for exponential families (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Multiple testing: family-wise error rate and false discovery rate (3 easy of 3); Likelihood ratio tests and Wilks' theorem (3 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — State statistical services Statistical Inference II: Testing of Hypotheses & Sequential An

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.