LAISHA
Open Laisha

CUET-PG Statistical Inference II: Testing of Hypotheses & Sequential Analysis: practice questions

CUET-PG - Statistics · India · National Testing Agency

Original practice questions written to the published syllabus · not past papers
10worked here, free
70written to this exam in this subject
11syllabus units

About CUET-PG

CUET-PG - Statistics is a postgraduate admission exam run by National Testing Agency, for candidates in India. Computer-based MCQ test used by central and participating universities for MSc Statistics admission.

Official site: exams.nta.ac.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Statistical Inference II: Testing of Hypotheses & Sequential Analysis in CUET-PG

Two types of error, level of significance, and the z, t, chi-square and F tests applied to agricultural data.

The logic and optimality of tests: errors and power, the Neyman-Pearson lemma, uniformly most powerful and unbiased tests, likelihood-ratio tests and their large-sample forms, and Wald's sequential probability ratio test.

Our 70 CUET-PG questions in this subject: 31 easy, 34 medium, 5 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

Question 1 · easy

What is the power of a test at a particular alternative θ₁?

  1. The probability of accepting H₀ when θ₁ is the true value
  2. The probability of rejecting H₀ when θ₁ is the true value
  3. The probability that H₁ is true given the observed data
  4. The probability of rejecting H₀ when H₀ is in fact true
Answer and working

B. The probability of rejecting H₀ when θ₁ is the true value

Power = 1 − β(θ₁) = P_θ₁(reject H₀). Accepting H₀ under θ₁ is the Type II error probability β; rejecting a true H₀ has probability α. The posterior probability of H₁ is a Bayesian quantity, not power.

Question 2 · easy

Plot yields are N(μ, 16). From 16 plots, H₀: μ = 50 is rejected when x̄ > 51. What is the size of the test?

  1. 0.0500
  2. 0.1587
  3. 0.3173
  4. 0.4013
Answer and working

B. 0.1587

Under H₀, X̄ ~ N(50, 1), so α = P(X̄ > 51) = P(Z > 1) = 0.1587. Using σ = 4 instead of SE = 1 gives z = 0.25; doubling gives a two-sided figure that does not apply to this one-sided rule.

Question 3 · medium

Under a monotone likelihood ratio in T, what does the Karlin-Rubin theorem give for H₀: θ ≤ θ₀ against H₁: θ > θ₀?

  1. A UMP level-α test that rejects for small T
  2. An LRT that is UMP only as n becomes large
  3. A UMPU test, though no UMP test exists here
  4. A UMP level-α test that rejects for large T
Answer and working

D. A UMP level-α test that rejects for large T

Karlin-Rubin: rejecting when T > c with P_θ₀(T > c) = α is UMP for the one-sided problem, and its power function is non-decreasing in θ.

Question 4 · easy

The generalised likelihood-ratio statistic for H₀: θ ∈ Θ₀ is Λ = sup_Θ₀ L(θ)/sup_Θ L(θ). When is H₀ rejected?

  1. When Λ exceeds 1, so the null fits better
  2. When Λ equals 0.5, the midpoint of its range
  3. When Λ is small, i.e. when −2 log Λ is large
  4. When Λ is large, close to its maximum of 1
Answer and working

C. When Λ is small, i.e. when −2 log Λ is large

Λ lies in [0, 1]; values near 1 mean the restricted model fits nearly as well as the full one, small values mean H₀ fits poorly. Λ cannot exceed 1 because the full maximum is at least the restricted one.

Question 5 · medium

A 2 × 2 table of adoption (yes/no) by training (yes/no) has cells a = 30, b = 20, c = 10, d = 40. What is Pearson's χ² without continuity correction?

  1. 16.67
  2. 4.08
  3. 15.04
  4. 0.17
Answer and working

A. 16.67

χ² = n(ad − bc)²/[(a + b)(c + d)(a + c)(b + d)] = 100 × 1000²/(50 × 50 × 40 × 60) = 16.67, with 1 df. With Yates' correction it is 15.04; omitting n gives 0.17.

Question 6 · medium

Germination is 45 of 100 seeds for treated and 30 of 100 for untreated seed. What is the pooled two-proportion z-statistic?

  1. 2.191
  2. 3.098
  3. 2.218
  4. 32.000
Answer and working

A. 2.191

Pooled p̄ = 75/200 = 0.375; SE = √(0.375 × 0.625 × (1/100 + 1/100)) = 0.0685; z = 0.15/0.0685 = 2.191. The unpooled SE gives 2.218; forgetting the two sample sizes gives 3.098.

Question 7 · medium

In a 2 × 2 table one expected frequency is 3. What is the recommended analysis?

  1. Fisher's exact test, because the χ² approximation fails with small expected counts
  2. Pooling the table with another experiment until every cell exceeds 3
  3. The z-test for two proportions, because it never needs large expected counts in any cell
  4. Pearson's χ² without correction, because small counts make it more powerful
Answer and working

A. Fisher's exact test, because the χ² approximation fails with small expected counts

With expected counts below 5, the χ² approximation can be poor; Fisher's exact test (conditioning on the margins) is the standard alternative. Yates' correction is a cruder fix. The z-test for two proportions is equivalent to the uncorrected χ² and has the same problem.

Question 8 · easy

A 95% two-sided confidence interval for a mean difference is 0.1 to 0.5 t/ha. What does the corresponding 5% two-sided test conclude?

  1. It rejects neither, because the interval does not include 0.6
  2. It rejects both a difference of 0 and a difference of 0.3
  3. It rejects a difference of 0 and does not reject a difference of 0.3
  4. It rejects a difference of 0.3 and does not reject a difference of 0
Answer and working

C. It rejects a difference of 0 and does not reject a difference of 0.3

A two-sided level-α test rejects θ₀ exactly when θ₀ lies outside the 1 − α interval: 0 is outside, 0.3 inside.

Question 9 · medium

Four ordered p-values are 0.004, 0.011, 0.020 and 0.040. How many hypotheses does Holm's step-down procedure reject at family-wise level 0.05?

  1. 3
  2. 1
  3. 2
  4. 4
Answer and working

D. 4

Holm compares p₍ⱼ₎ with 0.05/(m − j + 1): 0.004 ≤ 0.0125, 0.011 ≤ 0.0167, 0.020 ≤ 0.025, 0.040 ≤ 0.05, so all four are rejected. Bonferroni (all at 0.0125) would reject only two.

Question 10 · easy

In a variety trial, eight new entries are each to be compared only with one check variety, with control of the family-wise error rate. Which procedure is designed for this?

  1. Duncan's multiple range test
  2. Scheffé's method
  3. Dunnett's test
  4. Tukey's HSD test
Answer and working

C. Dunnett's test

Dunnett's procedure handles many-to-one comparisons with a control and is more powerful there than Tukey's all-pairs method or Scheffé's all-contrasts method.

A study plan for Statistical Inference II: Testing of Hypotheses & Sequential Analysis in CUET-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (51% of the 70 questions): Tests based on Z, t, chi-square and F distributions (12, 17%); Hypotheses, the two types of error, size and power (9, 13%); Power and sample-size calculation for common tests (8, 11%); Multiple testing: family-wise error rate and false discovery rate (7, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Neyman-Pearson lemma and most powerful tests (6, 9%); Wald and score (Rao) tests (6, 9%); Likelihood ratio tests and Wilks' theorem (5, 7%); Monotone likelihood ratio and uniformly most powerful tests (5, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Relation between tests and confidence intervals (5, 7%); Unbiased tests and UMPU tests for exponential families (5, 7%); Sequential probability ratio test: OC and ASN functions (2, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Unbiased tests and UMPU tests for exponential families (2 hard of 5), Wald and score (Rao) tests (1 hard of 6), Multiple testing: family-wise error rate and false discovery rate (1 hard of 7).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Likelihood ratio tests and Wilks' theorem (4 easy of 5); Multiple testing: family-wise error rate and false discovery rate (4 easy of 7).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — CUET-PG Statistical Inference II: Testing of Hypotheses & Sequential Analysis

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.