LAISHA
Open Laisha

ICAR AIEEA-PG Principles of Experimental Design & Basic Designs: practice questions

ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
38written to this exam in this subject
12syllabus units

About ICAR AIEEA-PG

ICAR AIEEA-PG - Group 07 Statistical Sciences (Master's admission and PG scholarship) is a postgraduate admission exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 120 minutes, single paper of 120 MCQs, +4 / -1, English. 2026 exam on 4 July 2026. Fills ICAR's all-India quota of Master's seats at agricultural universities.

Source: cdnbbsr.s3waas.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Principles of Experimental Design & Basic Designs in ICAR AIEEA-PG

Basic principles of experimental design, the analysis of variance, CRD and RBD: degrees of freedom, sums of squares, F, standard errors and critical differences on small data sets.

Fisher's three principles and how they shape a field or animal trial: uniformity trials, plot size and shape, the CRD, RCBD and Latin square with their analysis and efficiency, missing plots, transformations, multiple comparisons and analysis of covariance.

Our 38 ICAR AIEEA-PG questions in this subject: 25 easy, 13 medium, 0 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AIEEA-PG and are not shown on any other exam's page.

Question 1 · easy

What is the main purpose of randomisation in a field experiment?

  1. To remove systematic bias and make the error estimate valid
  2. To increase the number of error degrees of freedom in the analysis
  3. To reduce the error variance by grouping similar plots together
  4. To make every treatment occupy the most fertile plots in turn
Answer and working

A. To remove systematic bias and make the error estimate valid

Random allocation gives every treatment the same chance of landing on any unit, so no treatment is systematically favoured and the errors behave as independent, which justifies F and t tests. Reducing error by grouping is local control; error degrees of freedom depend on the design, not on randomisation.

Question 2 · easy

Before contour lines are drawn on a fertility contour map, the basic-unit yields are usually:

  1. Transformed to logarithms to make them additive
  2. Ranked and replaced by their rank in the whole field
  3. Divided by the grand mean to give coefficients of variation
  4. Smoothed by moving averages of neighbouring units
Answer and working

D. Smoothed by moving averages of neighbouring units

Individual basic-unit yields are noisy, so each is replaced by the average of a small group of neighbouring units before equal-yield lines are drawn. Logs, ranks or CVs are not the standard step.

Question 3 · easy

As plot size increases in a uniformity trial, the coefficient of variation of plot yields:

  1. Increases, because large plots include more soil types
  2. Decreases in direct proportion to plot size
  3. Decreases, but at a diminishing rate
  4. Stays constant, because the CV is free of the scale
Answer and working

C. Decreases, but at a diminishing rate

Larger plots average over more soil so the CV falls, but neighbouring soil is correlated, so each extra unit of area buys less reduction. Only with uncorrelated units (b = 1) would variance per unit fall in proportion to size.

Question 4 · medium

In a CRD with 5 replications per treatment the error mean square is 2.375 on 16 df. Taking t(0.05, 16) = 2.120, what is the critical difference between two treatment means?

  1. 2.07
  2. 1.91
  3. 0.92
  4. 1.46
Answer and working

A. 2.07

SEd = sqrt(2 MSE / r) = sqrt(2 x 2.375 / 5) = 0.9747; CD = 2.120 x 0.9747 = 2.07. Omitting the 2 gives 1.46; using 1.96 gives 1.91; dividing the root by r instead of putting r inside gives 0.92.

Question 5 · easy

For which experiment is a completely randomised design most appropriate?

  1. A laboratory test of fungicides on agar plates kept in one incubator
  2. A variety trial on a sloping field with a known fertility gradient
  3. A feeding trial with animals of widely different initial weights
  4. A fertiliser trial spread across two fields with different soils
Answer and working

A. A laboratory test of fungicides on agar plates kept in one incubator

The CRD puts all unit-to-unit variation into error, so it suits homogeneous material such as plates in one incubator. A slope, varied animals or two soil types call for blocking (or a covariate for initial weight).

Question 6 · easy

How are treatments randomised in an RCBD?

  1. In the same random order in every block for easy recording
  2. Once over the whole field, ignoring the block boundaries
  3. So that each treatment occurs once in every row and column
  4. Separately and independently within each block
Answer and working

D. Separately and independently within each block

Each block is a complete replicate, and a fresh randomisation in each block keeps treatment and position independent. Once-over randomisation is a CRD; row-and-column balance is a Latin square; repeating one order in every block is a systematic layout.

Question 7 · easy

How many error degrees of freedom does a 6 x 6 Latin square have?

  1. 30
  2. 15
  3. 25
  4. 20
Answer and working

D. 20

Error df = (t - 1)(t - 2) = 5 x 4 = 20. 25 would be (t - 1)^2, which is the RCBD formula with t blocks; 30 = t(t - 1); 15 subtracts the treatment df twice.

Question 8 · easy

An RCBD with 6 treatments and 4 blocks has one missing plot estimated by the missing-plot formula. How many error degrees of freedom remain?

  1. 15
  2. 13
  3. 23
  4. 14
Answer and working

D. 14

Normal error df = (4 - 1)(6 - 1) = 15; one df is lost for the estimated value, leaving 14. 23 is the total df of the complete experiment.

Question 9 · medium

Which procedure is designed specifically to compare each treatment with a single control?

  1. Tukey's HSD test
  2. Duncan's multiple range test
  3. Dunnett's test
  4. Scheffé's method
Answer and working

C. Dunnett's test

Dunnett's critical values allow for t - 1 comparisons against the same control and are more powerful for that question than procedures built for all pairs (Tukey, Duncan) or all contrasts (Scheffé).

Question 10 · medium

If the difference to be detected is halved while everything else stays the same, the required number of replications:

  1. Halves
  2. Stays the same
  3. Doubles
  4. Becomes four times as large
Answer and working

D. Becomes four times as large

r is proportional to 1/d^2, so halving d multiplies r by 4. Equivalently, the SE of a difference falls only with the square root of r.

A study plan for Principles of Experimental Design & Basic Designs in ICAR AIEEA-PG

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (61% of the 38 questions): Completely randomised design (8, 21%); Randomised complete block design (6, 16%); Principles: replication, randomisation and local control (5, 13%); Sample size and number of replications (4, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Assumptions of ANOVA and variance-stabilising transformations (3, 8%); Latin square design and Graeco-Latin squares (2, 5%); Missing plot techniques (2, 5%); Multiple comparison procedures: LSD, Tukey, Duncan, Dunnett and Scheffe (2, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Size and shape of plots and blocks; Smith's variance law (2, 5%); Uniformity trials, fertility contour maps and soil heterogeneity (2, 5%); Analysis of covariance (1, 3%); Relative efficiency of designs (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Bank the easy marks: Assumptions of ANOVA and variance-stabilising transformations (3 easy of 3); Latin square design and Graeco-Latin squares (2 easy of 2).

    Do these early in revision so they are fast on the day.

  5. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AIEEA-PG Principles of Experimental Design & Basic Designs

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.