LAISHA
Open Laisha

ICAR AICE-JRF/SRF Principles of Experimental Design & Basic Designs: practice questions

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
96written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 2 hours, 120 MCQs, +4 / -1 (Part A general, Part B core group, Part C subject). 2026 exam held with AIEEA-PG in July 2026.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Principles of Experimental Design & Basic Designs in ICAR AICE-JRF/SRF

Uniformity trials, CRD, RCBD and Latin square, multiple comparison procedures, missing plot techniques, analysis of covariance and variance-stabilising transformations, at master's level: formulas for missing values and bias, relative efficiencies, assumptions and their tests.

Standard error, CV, tests of significance, data transformation and missing plot techniques, the basic designs and their efficiency as used in agronomic trials.

Fisher's three principles and how they shape a field or animal trial: uniformity trials, plot size and shape, the CRD, RCBD and Latin square with their analysis and efficiency, missing plots, transformations, multiple comparisons and analysis of covariance.

Our 96 ICAR AICE-JRF/SRF questions in this subject: 27 easy, 46 medium, 23 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

A researcher applies four fertiliser treatments, one per pot, and records the heights of five plants in each pot, then analyses the data with 16 error degrees of freedom. What is wrong?

  1. The pots should have been arranged in a Latin square for this analysis
  2. Plants within a pot are sub-samples, so the error is pseudo-replicated
  3. Plant height needs a log transformation before any analysis is valid
  4. Five plants per pot is too few to estimate a variance in each pot
Answer and working

B. Plants within a pot are sub-samples, so the error is pseudo-replicated

The pot is the experimental unit because the fertiliser is applied to the pot. Plants in one pot share that single application, so their variation is sampling variation, not experimental error. With one pot per treatment there is in fact no valid error at all; the fix is more pots per treatment. Neither the Latin square nor a transformation addresses the missing replication.

Question 2 · medium

A fertility contour map drawn from a uniformity trial shows roughly parallel contour lines running east to west. What does this indicate and what layout follows?

  1. Patchy fertility; a completely randomised design will be most efficient
  2. An east-west gradient; blocks should be long strips running north-south
  3. A north-south gradient; blocks should be long strips running east-west
  4. No gradient at all; plot shape and block direction do not matter here
Answer and working

C. A north-south gradient; blocks should be long strips running east-west

Contour lines join points of equal yield, so parallel east-west lines mean yield changes from north to south. Blocks should be laid across the gradient, i.e. along the contours (east-west), so each block is uniform. Patchy fertility would show closed contours.

Question 3 · easy

In a CRD with 20 observations the grand total is 224. What is the correction factor?

  1. 2640.8
  2. 11.2
  3. 2508.8
  4. 12544.0
Answer and working

C. 2508.8

CF = G^2 / N = 224^2 / 20 = 50176 / 20 = 2508.8. 11.2 is the grand mean; dividing by N - 1 or by the number of treatments is wrong.

Question 4 · medium

An RCBD has 5 treatments in 4 blocks with block totals 92, 98, 104, 106 (grand total 400). What is the block sum of squares?

  1. 2030.0
  2. 24.0
  3. 8024.0
  4. 8.0
Answer and working

B. 24.0

CF = 400^2 / 20 = 8000.0. Block SS = (sum of B^2)/t - CF = 40120/5 - 8000.0 = 24.0. Dividing by the number of blocks (4) instead of the number of plots per block (5) gives 2030.0; 8.0 is the block mean square.

Question 5 · hard

In an RCBD, a nitrogen treatment raises yield by about 20% in every block, and the blocks differ greatly in yield level. Which assumption of the standard analysis is most at risk?

  1. Normality of the block totals across the field
  2. Additivity of treatment and block effects
  3. Equality of the number of plots in each block
  4. Independence of the errors within each block
Answer and working

B. Additivity of treatment and block effects

A constant percentage effect means the absolute effect is larger in high-yielding blocks, so treatment and block effects multiply rather than add; a log transformation can restore additivity. Independence comes from randomisation, and block sizes are equal by design.

Question 6 · medium

In an RCBD the block mean square turns out equal to the error mean square. What is the efficiency of the RCBD relative to a CRD (ignoring the df adjustment)?

  1. 0%
  2. 100%
  3. 200%
  4. 50%
Answer and working

B. 100%

With Eb = Ee, RE = [(r - 1)Ee + r(t - 1)Ee] / [(rt - 1)Ee] = (rt - 1)/(rt - 1) = 1: blocking neither helped nor hurt the error variance (it only cost degrees of freedom).

Question 7 · medium

Following Gomez and Gomez, germination percentages that all lie between 35% and 65% should be:

  1. Given the arcsine transformation
  2. Given the logarithmic transformation
  3. Analysed without transformation
  4. Given the square-root transformation
Answer and working

C. Analysed without transformation

Binomial variance changes little in the 30-70% range, so no transformation is needed. Square root is suggested when data lie wholly within 0-30% or 70-100%, and arcsine when they span a wider range.

Question 8 · easy

An RCBD with 5 treatments and 4 blocks is analysed by covariance with one covariate. How many error degrees of freedom does the adjusted analysis have?

  1. 12
  2. 11
  3. 10
  4. 15
Answer and working

B. 11

Unadjusted error df = (4 - 1)(5 - 1) = 12; one is used to estimate the regression coefficient, leaving 11. 15 would be the CRD error df on 20 units.

Question 9 · medium

Which is an assumption of the analysis of covariance?

  1. The covariate and the response have a correlation of exactly one
  2. The covariate is affected by the treatments in the same proportion
  3. The regression of Y on X has the same slope in every treatment
  4. The covariate is measured after the treatments have been applied
Answer and working

C. The regression of Y on X has the same slope in every treatment

ANCOVA assumes a linear relation with a common slope across treatments, a covariate unaffected by treatments and measured with little error. A perfect correlation is not required, and measuring after treatment risks treatment influence.

Question 10 · easy

Which assumption of ANOVA is protected mainly by randomisation?

  1. Normality of the errors
  2. Additivity of effects
  3. Independence of the errors
  4. Homogeneity of variances
Answer and working

C. Independence of the errors

Random allocation breaks any systematic link between neighbouring plots and treatments, so errors can be treated as independent. Normality, additivity and equal variances depend on the nature of the data and may need transformations.

A study plan for Principles of Experimental Design & Basic Designs in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (41% of the 96 questions): Assumptions of ANOVA and variance-stabilising transformations (11, 11%); Completely randomised design (10, 10%); Multiple comparison procedures: LSD, Tukey, Duncan, Dunnett and Scheffe (9, 9%); Randomised complete block design (9, 9%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Size and shape of plots and blocks; Smith's variance law (9, 9%); Analysis of covariance (8, 8%); Missing plot techniques (8, 8%); Principles: replication, randomisation and local control (8, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Latin square design and Graeco-Latin squares (7, 7%); Relative efficiency of designs (6, 6%); Sample size and number of replications (6, 6%); Uniformity trials, fertility contour maps and soil heterogeneity (5, 5%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Relative efficiency of designs (3 hard of 6), Missing plot techniques (3 hard of 8), Size and shape of plots and blocks; Smith's variance law (3 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Principles: replication, randomisation and local control (4 easy of 8); Completely randomised design (4 easy of 10).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Principles of Experimental Design & Basic Designs

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.