LAISHA
Open Laisha

ICAR AICE-JRF/SRF Statistical Genomics: QTL Mapping, GWAS & Genomic Selection: practice questions

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
100written to this exam in this subject
10syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 2 hours, 120 MCQs, +4 / -1 (Part A general, Part B core group, Part C subject). 2026 exam held with AIEEA-PG in July 2026.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Statistical Genomics: QTL Mapping, GWAS & Genomic Selection in ICAR AICE-JRF/SRF

Statistics for molecular-breeding data: genetic map construction, interval mapping of QTL, genome-wide association with mixed models, multiple-testing control, genomic prediction (GBLUP, ridge and Bayesian alphabet), and the analysis of high-throughput expression data.

Our 100 ICAR AICE-JRF/SRF questions in this subject: 19 easy, 63 medium, 18 hard, across 10 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · hard

An SSR locus has three alleles at frequencies 0.5, 0.3 and 0.2. What is its expected heterozygosity?

  1. 0.38
  2. 0.55
  3. 0.50
  4. 0.62
Answer and working

D. 0.62

Hₑ = 1 − Σpᵢ² = 1 − (0.25 + 0.09 + 0.04) = 0.62. 0.38 is Σpᵢ² itself; 0.55 is close to the PIC, which subtracts a further term.

Question 2 · hard

How does Haley-Knott regression approximate interval mapping?

  1. Regression on expected QTL genotypes
  2. It replaces the trait values by their ranks and runs a rank test
  3. It fits a Bayesian model with an unknown number of QTLs
  4. It tests only at marker positions and interpolates LOD between them
Answer and working

A. Regression on expected QTL genotypes

Using expected genotype values in a least-squares regression is fast and closely matches maximum likelihood except where markers are sparse or effects are large.

Question 3 · medium

Which LD measure most directly determines the power to detect a causal variant through a nearby marker?

  1. D
  2. r²
  3. D′
  4. F_ST
Answer and working

B. r²

The sample size needed through a marker is roughly 1/r² times that needed with the causal variant itself. D′ can be 1 even when r² is small.

Question 4 · medium

How does a biparental population avoid the confounding by structure seen in diversity panels?

  1. It contains more alleles at each locus than a diversity panel does
  2. All individuals share the same two parents
  3. It removes linkage disequilibrium between all markers
  4. It requires no phenotypes for mapping
Answer and working

B. All individuals share the same two parents

Designed crosses have no structure by construction, but they sample only two alleles and have extended LD, so resolution is coarser.

Question 5 · easy

A GWAS tests 500,000 SNPs. What is the Bonferroni per-test threshold for a family-wise error rate of 0.05?

  1. 5 × 10⁻⁸
  2. 0.05
  3. 1 × 10⁻⁷
  4. 1 × 10⁻⁵
Answer and working

C. 1 × 10⁻⁷

α/m = 0.05/500,000 = 1 × 10⁻⁷, i.e. −log₁₀ p = 7. 5 × 10⁻⁸ is the conventional threshold in human GWAS for about a million independent tests.

Question 6 · medium

What does G capture that the pedigree relationship matrix A does not?

  1. Only the expected relationship from recorded parents
  2. The environmental covariance between animals
  3. Dominance effects of every gene
  4. Realised, not expected, DNA sharing
Answer and working

D. Realised, not expected, DNA sharing

A gives expectations (full sibs 0.5); G measures actual sharing, which varies around 0.5, and captures unrecorded relationships.

Question 7 · hard

A dairy programme has i = 2.0 and σ_A = 10 units. Progeny testing gives accuracy 0.85 and generation interval 6 years; genomic selection gives accuracy 0.70 and interval 2.5 years. What is the annual genetic gain under each?

  1. Progeny testing 2.83; genomic 5.60 units per year
  2. Progeny testing 17.00; genomic 14.00 units per year
  3. Progeny testing 5.60; genomic 2.83 units per year
  4. Progeny testing 2.83; genomic 2.83 units per year
Answer and working

A. Progeny testing 2.83; genomic 5.60 units per year

ΔG = i r σ_A/L: progeny testing 2 × 0.85 × 10/6 = 2.83; genomic 2 × 0.70 × 10/2.5 = 5.60. Despite lower accuracy, GS nearly doubles gain through the shorter interval. Ignoring L gives 17 and 14.

Question 8 · medium

Why can random k-fold cross-validation overstate the accuracy of genomic prediction for new breeding families?

  1. Random folds always contain too few markers
  2. Relatives span training and validation folds
  3. It uses the same marker effects for all individuals
  4. It ignores the heritability of the trait
Answer and working

B. Relatives span training and validation folds

Predictions of close relatives are easy; new families are less related to the training set. Forward or leave-family-out validation mimics actual use.

Question 9 · medium

Why are TMM or median-of-ratios normalisation used instead of simple counts per million?

  1. They correct for gene length within a sample
  2. They also correct for composition
  3. They remove all biological variation
  4. They convert counts to a normal distribution
Answer and working

B. They also correct for composition

If a few genes dominate the reads in one condition, all others appear lower; composition-robust scaling factors fix this. Gene-length correction (RPKM, TPM) is for within-sample comparison.

Question 10 · medium

What is the purpose of the bootstrap in QTL mapping?

  1. To set genome-wide significance thresholds by shuffling phenotypes
  2. To impute missing marker genotypes
  3. Confidence intervals for QTL position
  4. To order markers on a linkage group
Answer and working

C. Confidence intervals for QTL position

Resampling individuals with replacement and re-scanning gives an empirical distribution of the peak position. Permutation, not bootstrap, gives thresholds.

A study plan for Statistical Genomics: QTL Mapping, GWAS & Genomic Selection in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 100 questions): Genomic selection: ridge regression BLUP and Bayesian methods (BayesA, BayesB) (11, 11%); Linkage map construction and map functions (11, 11%); QTL mapping: single-marker, interval and composite interval mapping (11, 11%); Gene expression and RNA-seq differential analysis (10, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Genome-wide association studies with mixed models (10, 10%); Genomic relationship matrices and GBLUP (10, 10%); Statistical genomics descriptive and inferential basics (10, 10%); Linkage disequilibrium and population structure (9, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Molecular markers and genotype data quality (9, 9%); Multiple testing in genomics: Bonferroni and FDR (9, 9%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Genomic selection: ridge regression BLUP and Bayesian methods (BayesA, BayesB) (3 hard of 11), Molecular markers and genotype data quality (2 hard of 9), Multiple testing in genomics: Bonferroni and FDR (2 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Multiple testing in genomics: Bonferroni and FDR (3 easy of 9); Gene expression and RNA-seq differential analysis (3 easy of 10).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Statistical Genomics: QTL Mapping, GWAS & Genomic Selection

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.