LAISHA
Open Laisha

ICAR AICE-JRF/SRF Crop Area & Yield Estimation: Crop-Cutting Experiments: practice questions

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
70written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 2 hours, 120 MCQs, +4 / -1 (Part A general, Part B core group, Part C subject). 2026 exam held with AIEEA-PG in July 2026.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Crop Area & Yield Estimation: Crop-Cutting Experiments in ICAR AICE-JRF/SRF

Crop estimation surveys and the agricultural statistics system: the multistage design of crop-cutting experiments, area statistics, land-use statistics, and estimation of yield and its standard error.

How crop production is measured: area from complete enumeration, sample surveys and area frames, yield from crop-cutting experiments on randomly located plots, the Mahalanobis and Sukhatme debate on plot size, crop insurance CCEs, and newer satellite, model and smartphone-based methods.

Our 70 ICAR AICE-JRF/SRF questions in this subject: 15 easy, 34 medium, 21 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

A district's crop area is estimated with a CV of 2% and its yield, independently, with a CV of 4%. What is the approximate CV of estimated production?

  1. 4.47%
  2. 6.00%
  3. 4.00%
  4. 8.00%
Answer and working

A. 4.47%

For a product of independent estimates, CV(P)^2 is about CV(A)^2 + CV(Y)^2 = 4 + 16 = 20, so CV(P) is about 4.47%. Adding CVs (6.00%) overstates it; multiplying them has no basis.

Question 2 · medium

An area frame stratum has 1000 segments; 50 are sampled at random and contain 400 ha of maize in total. What is the estimated maize area in the stratum?

  1. 400 ha
  2. 4000 ha
  3. 8000 ha
  4. 20000 ha
Answer and working

C. 8000 ha

Estimate = (N/n) x sample total = (1000/50) x 400 = 20 x 400 = 8000 ha. Multiplying by n gives 20000; reporting the sample total ignores expansion.

Question 3 · easy

In the GCES design, what are the first-stage units within a stratum?

  1. Fields
  2. Districts
  3. Plots
  4. Villages
Answer and working

D. Villages

Villages are selected first, then fields growing the crop within villages, then a plot within each field. Districts are the domains, and tehsils or blocks the strata.

Question 4 · medium

For a fixed plot area, which shape minimises the boundary and hence border problems?

  1. A long narrow rectangle (a strip)
  2. A square (or a circle)
  3. An L-shaped plot
  4. A triangle
Answer and working

B. A square (or a circle)

Among practical shapes, a square has the least perimeter for a given area (a circle less still, but circles are hard to mark accurately).

Question 5 · hard

Supervisors re-enumerate crop area in a random sample of villages and find that recorded area exceeds observed area by 6% on average. How can this be used?

  1. As a reason to stop using recorded area in any district at all
  2. As a bias estimate, to adjust figures or target retraining
  3. As the sampling error of the area estimate, to be added to its variance
  4. As proof that crop-cutting yields in those villages are 6% too high
Answer and working

B. As a bias estimate, to adjust figures or target retraining

A random re-enumeration estimates the mean difference (bias) with a standard error; it can adjust figures by a ratio or direct corrective action. It is a bias measure, not sampling error, and says nothing directly about yields.

Question 6 · medium

In orchard surveys, which units are typically sampled?

  1. Districts, then single fruits picked at random
  2. Villages, then orchards, then sample trees
  3. Markets, then traders
  4. Nurseries, then seedlings
Answer and working

B. Villages, then orchards, then sample trees

Multistage sampling of villages, orchards and trees, with bearing tree counts and produce from sample trees, gives yield per tree and per hectare.

Question 7 · hard

Why must orchard surveys distinguish bearing from non-bearing trees?

  1. Only non-bearing trees can be counted from satellite images
  2. Bearing trees are always excluded from horticultural area
  3. Non-bearing trees take area but give no fruit, biasing yield
  4. Non-bearing trees produce more fruit than bearing trees in most crops
Answer and working

C. Non-bearing trees take area but give no fruit, biasing yield

Including non-bearing trees in the per-tree average or ignoring their area would distort yield and production estimates.

Question 8 · easy

Which index derived from satellite data is most widely related to crop vigour and yield?

  1. The aridity index of the soil only
  2. The consumer price index of rural labourers
  3. NDVI, the normalised difference vegetation index
  4. The Gini index of land distribution in a district
Answer and working

C. NDVI, the normalised difference vegetation index

NDVI, computed from red and near-infrared reflectance, tracks green biomass and is commonly regressed on CCE yields.

Question 9 · medium

Which method gives the most direct estimate of avoidable crop loss?

  1. Counting pests on a single date without measuring yield
  2. Comparing this year's yield with the national average
  3. Farmers' recall of their losses, collected one year after harvest
  4. Paired protected and unprotected plots on the same fields
Answer and working

D. Paired protected and unprotected plots on the same fields

Paired plots compare yields with and without protection under the same conditions; the other methods confound loss with other factors or lack yield measurement.

Question 10 · medium

How do survey-based loss estimates usually work over large areas?

  1. Incidence on sampled fields is regressed against yield
  2. Losses are assumed equal to the pesticide quantity sold
  3. Losses are measured only in research stations and scaled up
  4. Every field is protected and unprotected in alternate years
Answer and working

A. Incidence on sampled fields is regressed against yield

Incidence surveys plus damage-yield relationships estimated from experiments allow losses to be estimated over many fields.

A study plan for Crop Area & Yield Estimation: Crop-Cutting Experiments in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 70 questions): Crop-cutting experiments: multistage design of villages, fields and plots (8, 11%); Field protocol: plot location, harvesting, threshing and driage (8, 11%); Crop-cutting for crop insurance: number of CCEs and technology-assisted CCEs (7, 10%); Plot size, shape and border bias in crop-cutting (7, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Estimation of yield and its standard error at district and state level (6, 9%); International practice: FAO guidelines and objective yield surveys (6, 9%); Remote sensing, crop models and smartphone data in yield estimation (6, 9%); Yield estimation for horticultural and plantation crops (6, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Estimation of crop losses due to pests and diseases (5, 7%); Area statistics: complete enumeration, sample-based (EARAS, TRS) and area-frame methods (4, 6%); Improvement of Crop Statistics (ICS) scheme and quality checks (4, 6%); Production = area x yield: the statistical structure (3, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Crop-cutting experiments: multistage design of villages, fields and plots (4 hard of 8), Area statistics: complete enumeration, sample-based (EARAS, TRS) and area-frame methods (2 hard of 4), Improvement of Crop Statistics (ICS) scheme and quality checks (2 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Estimation of crop losses due to pests and diseases (2 easy of 5); Yield estimation for horticultural and plantation crops (2 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Crop Area & Yield Estimation: Crop-Cutting Experiments

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.