ICAR AICE-JRF/SRF Groups of Experiments, Multi-Location Trials & Genotype x Environment Analysis: practice questions
ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
86written to this exam in this subject
9syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF - Agricultural Statistics, Computer Application, Bioinformatics (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based test, 2 hours, 120 MCQs, +4 / -1 (Part A general, Part B core group, Part C subject). 2026 exam held with AIEEA-PG in July 2026.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Groups of Experiments, Multi-Location Trials & Genotype x Environment Analysis in ICAR AICE-JRF/SRF
Groups of experiments, homogeneity of error variances, pooled analysis; G x E interaction and stability parameters (Eberhart-Russell and related).
Pooled analysis of experiments over locations and seasons; stability analysis of varieties.
Combining trials across sites and seasons: testing homogeneity of error variances, pooled analysis, genotype by environment interaction, the classical stability models and AMMI and GGE biplots that decide variety release in national coordinated trials.
Our 86 ICAR AICE-JRF/SRF questions in this subject: 17 easy, 45 medium, 24 hard, across 9 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · easy
What is crossover genotype x environment interaction?
A change in genotype differences with no change in ranking
A change in the ranking of genotypes between environments
A change in the environment means with no genotype effect
A change in the number of replicates between environments
Answer and working
B. A change in the ranking of genotypes between environments
Crossover (qualitative) interaction reverses rankings; non-crossover changes only magnitudes.
Question 2 · medium
What is a mega-environment?
A group of environments sharing the same best genotypes
The single environment with the highest mean yield in the whole series
All environments pooled into one analysis
The single largest site in a trial series
Answer and working
A. A group of environments sharing the same best genotypes
Crossover interaction occurs between mega-environments but not within them.
Question 3 · easy
In the Finlay-Wilkinson approach, a regression coefficient of 1 indicates:
Above-average stability
Average stability
No response to environment
Below-average stability
Answer and working
B. Average stability
b = 1: the genotype responds like the average genotype; b < 1 above-average stability; b > 1 responsive.
Question 4 · medium
According to Eberhart and Russell, which genotype is stable?
Any mean, b near 1, large deviation variance
High mean, b well above 1, large deviation variance
Low mean, b near 0, deviation variance near 0
High mean, b near 1, deviation variance near 0
Answer and working
D. High mean, b near 1, deviation variance near 0
Stability needs high mean, average response (b = 1) and predictable response (S^2 d = 0).
Question 5 · medium
What does Lin and Binns' superiority measure assess?
Distance of a genotype from the best genotype in each environment
The number of environments in which a genotype was tested at all
The variance of a genotype's yields over years
The slope of a genotype on the environmental index
Answer and working
A. Distance of a genotype from the best genotype in each environment
Low superiority values mean a genotype is close to the best everywhere, combining yield and stability.
Question 6 · hard
Why can a parsimonious AMMI model predict better than raw cell means?
AMMI uses more replicates than the raw means do
AMMI removes the environment main effects entirely, often improving fit
Discarded axes are largely noise, so the model smooths the means
Raw cell means are biased in balanced trials
Answer and working
C. Discarded axes are largely noise, so the model smooths the means
Retaining main effects and the first few axes keeps signal and drops noise, as Gauch showed by cross-validation.
Question 7 · medium
Which method chooses the number of AMMI axes by predicting held-out replicates?
Cross-validation
Gollob's df rule only
Bartlett's test of variances
The Durbin-Watson test
Answer and working
A. Cross-validation
Cross-validation emphasises predictive accuracy and often retains fewer axes than F tests.
Question 8 · medium
In a GGE biplot, two environment vectors form an obtuse angle. What does this suggest?
The environments are identical
The two environments are negatively correlated
The environments are highly positively correlated
One environment has missing data
Answer and working
B. The two environments are negatively correlated
The cosine of the angle approximates the correlation: acute positive, right angle near zero, obtuse negative.
Question 9 · easy
Why is a separate residual variance often fitted for each environment in a MET mixed model?
Genotype effects differ between trials
All trials have identical errors
Trial error variances differ
It reduces the number of genotypes
Answer and working
C. Trial error variances differ
Heterogeneous error variances are common and modelling them weights trials appropriately.
Question 10 · easy
What is the sum of the environmental indices in the Eberhart-Russell model?
The number of environments
Zero
One
The grand mean
Answer and working
B. Zero
Indices are environment means minus the grand mean, so they sum to zero.
A study plan for Groups of Experiments, Multi-Location Trials & Genotype x Environment Analysis in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (38% of the 86 questions): Finlay-Wilkinson and Eberhart-Russell stability models (11, 13%); Mixed-model analysis of multi-environment trials (11, 13%); Pooled analysis over locations and years (11, 13%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: AMMI models (10, 12%); GGE biplots and mega-environment analysis (10, 12%); Other stability parameters: Shukla, Wricke's ecovalence and Perkins-Jinks (9, 10%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Analysis of perennial and repeated-season experiments (8, 9%); Genotype x environment interaction and its partitioning (8, 9%); Groups of experiments and testing homogeneity of error variances (8, 9%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Mixed-model analysis of multi-environment trials (4 hard of 11), AMMI models (3 hard of 10), GGE biplots and mega-environment analysis (3 hard of 10).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: GGE biplots and mega-environment analysis (3 easy of 10); Genotype x environment interaction and its partitioning (2 easy of 8).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.