LAISHA
Open Laisha

ICAR AICE-JRF/SRF Food Processing & Technology Management: practice questions

ICAR AICE-JRF/SRF (PhD admission and fellowship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
47written to this exam in this subject
8syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based CBT, 2 hours, 120 MCQs, 480 marks, +4 / -1. 2026 exam on 4 July 2026. 72 subjects at 122 cities.

Source: cdnbbsr.s3waas.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Food Processing & Technology Management in ICAR AICE-JRF/SRF

The business of food processing: the state of the industry, processing principles, costs, food law and how a plant-level project is put together.

Our 47 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 21 medium, 25 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

The 'hurdle concept' in food preservation means:

  1. Using a single very severe heat treatment
  2. Adding the maximum permitted level of every preservative, so that each one acts as a separate barrier and heat treatment can be dropped
  3. Storing food behind physical barriers against pests
  4. Combining several mild preservation factors that together prevent spoilage with less quality damage than one severe treatment
Answer and working

D. Combining several mild preservation factors that together prevent spoilage with less quality damage than one severe treatment

The hurdle concept uses several moderate barriers, such as reduced water activity, mild acidity, a preservative, packaging and chilling, which together inhibit microbes. The aim is to avoid one severe treatment, and maximum preservative use or pest barriers are not what the term means.

Question 2 · hard

An oil mill crushes 100 kg of oilseed bought at 60 currency units per kg and obtains 36 kg oil (140 per kg) and 62 kg cake (25 per kg). Processing cost is 4 per kg of seed. What is the net crushing margin per 100 kg of seed, in currency units?

  1. -1,360
  2. 590
  3. 190
  4. 6,190
Answer and working

C. 190

Output value = 36 x 140 + 62 x 25 = 5040 + 1550 = 6,590. Costs = seed 6,000 + processing 400 = 6,400. Net margin = 190. Leaving out cake value turns it into a loss of 1,360; 590 is the gross margin before processing cost; 6,190 forgets the seed cost.

Question 3 · medium

A sugar mill earns outputs (sugar, molasses and bagasse) worth 36,000 currency units per tonne of cane crushed. Processing and selling costs are 8,000 per tonne of cane and the mill needs a margin of 3,000 per tonne of cane. What is the maximum cane price, in currency units, it can pay farmers?

  1. 28,000 per tonne
  2. 25,000 per tonne
  3. 33,000 per tonne
  4. 36,000 per tonne
Answer and working

B. 25,000 per tonne

Raw-material price ceiling = output value - processing and selling costs - required margin = 36,000 - 8,000 - 3,000 = 25,000. Ignoring the margin gives 28,000; ignoring processing cost gives 33,000. This back-calculation is how processors decide what they can afford to pay for raw material.

Question 4 · medium

A pickle unit has annual fixed costs of 4,000,000 currency units, sells at 80 currency units per kg with variable cost 60 per kg, and wants a profit of 2,000,000 before tax. How many kg must it sell?

  1. 200,000 kg
  2. 75,000 kg
  3. 100,000 kg
  4. 300,000 kg
Answer and working

D. 300,000 kg

Required quantity = (fixed cost + target profit) / contribution = (4,000,000 + 2,000,000) / 20 = 300,000 kg. 200,000 kg is only break-even; dividing by price rather than contribution (75,000 kg), or covering only the target profit (100,000 kg), are the usual slips.

Question 5 · hard

A packing line is the bottleneck in a snack plant. Product A earns a contribution of 12 currency units per kg and uses 0.5 minutes of line time per kg; product B earns 20 per kg and uses 1.0 minute per kg. Demand for both exceeds capacity. Which product should be given priority, and why?

  1. Product B, because it earns the higher contribution per kg
  2. Either, because both are profitable
  3. Product A, because it earns 24 per minute of line time against 20 for B
  4. Product B, because it uses more line time and so absorbs more fixed cost
Answer and working

C. Product A, because it earns 24 per minute of line time against 20 for B

When a resource is the constraint, rank products by contribution per unit of that resource: A = 12 / 0.5 = 24 per minute; B = 20 / 1.0 = 20 per minute. Ranking by contribution per kg picks B wrongly. Absorbing fixed cost does not change total fixed cost.

Question 6 · hard

Under the WTO SPS Agreement, a member country that sets a maximum residue limit stricter than the Codex standard must:

  1. Obtain prior permission from the Codex Alimentarius Commission before applying the limit
  2. Justify the stricter measure with scientific evidence or an appropriate risk assessment
  3. Apply it only to domestic producers, not imports
  4. Pay compensation to exporting countries automatically
Answer and working

B. Justify the stricter measure with scientific evidence or an appropriate risk assessment

Measures conforming to Codex are presumed consistent with SPS; stricter ones are allowed if scientifically justified by risk assessment. Codex does not grant permission, SPS measures must not discriminate against imports, and compensation is not automatic.

Question 7 · hard

A fruit processor wants to export mango pulp. In most exporting countries, which pairing of institutions and roles is correct?

  1. The domestic food regulator issues every export certificate; the export promotion agency sets domestic food standards
  2. An export promotion agency registers and supports exporters; an official inspection body certifies consignments
  3. The seafood export agency registers fruit exporters; the inspection body sets the residue limits for every export
  4. The national standards bureau registers all exporters; the domestic food regulator runs export trade fairs
Answer and working

B. An export promotion agency registers and supports exporters; an official inspection body certifies consignments

Exporting countries usually separate promotion (registration, market support) from official certification, which follows Codex guidelines and the importing country's requirements; India's export development authority and export inspection council, and the export certification services of agriculture departments in Australia and New Zealand, are examples. Residue limits are set by food regulators and Codex, seafood agencies cover marine products, and standards bureaux do not register exporters.

Question 8 · hard

A small processing plant costs 10 million currency units now and yields net cash inflows of 3, 4, 5 and 4 million at the end of years 1 to 4. At a discount rate of 12 per cent, what is its NPV?

  1. 1.968 million
  2. 6.000 million
  3. 1.757 million
  4. 11.968 million
Answer and working

A. 1.968 million

Discount factors at 12 per cent: 0.8929, 0.7972, 0.7118, 0.6355. PV of inflows = 3x0.8929 + 4x0.7972 + 5x0.7118 + 4x0.6355 = 11.968 million. NPV = 11.968 - 10 = 1.968 million currency units. 6.000 million ignores discounting; 1.757 million pushes every cash flow, including the initial outlay, one year later (1.968 / 1.12); 11.968 million is the present value of inflows, not NPV.

Question 9 · medium

In the stage-gate process for a new food product, what happens at each 'gate'?

  1. The product is launched in one new region
  2. Production capacity is doubled
  3. The recipe and label are sent to the food regulator for approval before the next stage can begin
  4. Management decides whether to continue, stop, hold or rework the project against set criteria
Answer and working

D. Management decides whether to continue, stop, hold or rework the project against set criteria

Gates are decision points between stages, where projects are continued, killed, held or recycled. Launch is the final stage, capacity decisions are part of business analysis and scale-up, and most products do not need pre-approval of recipes, though novel ingredients and some claims may.

Question 10 · hard

A small processor must decide between building its own brand and supplying a supermarket chain's private label. Which is the main trade-off?

  1. Private label offers assured volume and lower marketing cost but lower margins and dependence on one buyer
  2. Private label always earns higher margins than own brands
  3. Own brands need no distribution network
  4. Private label removes the need to meet food safety standards, because the retailer takes over legal responsibility
Answer and working

A. Private label offers assured volume and lower marketing cost but lower margins and dependence on one buyer

Private-label supply trades brand margin and independence for volume and reduced marketing spend; the retailer holds the customer relationship and bargaining power. Own brands need distribution and promotion, and private-label suppliers usually face stricter audits, not looser ones.

A study plan for Food Processing & Technology Management in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (64% of the 47 questions): Cost analysis of processing (15, 32%); Case studies in processing ventures (10, 21%); Food laws and the FSS Act (5, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Plant-level project formulation (4, 9%); Principles of food processing (4, 9%); Status of the food processing industry (4, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Post-harvest losses and their reduction (3, 6%); Food safety in processing (2, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Plant-level project formulation (3 hard of 4), Post-harvest losses and their reduction (2 hard of 3), Case studies in processing ventures (6 hard of 10).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Cost analysis of processing (1 easy of 15).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Food Processing & Technology Management

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.