LAISHA
Open Laisha

ICAR AICE-JRF/SRF Agricultural Production Economics: practice questions

ICAR AICE-JRF/SRF (PhD admission and fellowship) · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
57written to this exam in this subject
15syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD admission and fellowship) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. LAN-based CBT, 2 hours, 120 MCQs, 480 marks, +4 / -1. 2026 exam on 4 July 2026. 72 subjects at 122 cities.

Source: cdnbbsr.s3waas.gov.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Agricultural Production Economics in ICAR AICE-JRF/SRF

Algebra of production function forms (Cobb-Douglas, CES, transcendental, translog), returns to scale and Euler's theorem, cost minimisation with Lagrangian, isoclines and ridge lines, Farrell efficiency, SFA and DEA, Hicksian technical change and TFP, risk and utility, household models and duality lemmas.

The economics of turning inputs into farm output: production functions, the three basic relationships, optimum input use, efficiency, scale and risk.

Our 57 ICAR AICE-JRF/SRF questions in this subject: 2 easy, 27 medium, 28 hard, across 15 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

In the CES production function the elasticity of substitution is 1/(1 + r). As r approaches zero, the CES function approaches

  1. the Leontief fixed-proportions form
  2. the linear perfect-substitutes form
  3. the quadratic polynomial form
  4. the Cobb-Douglas form
Answer and working

D. the Cobb-Douglas form

When r tends to 0, the elasticity 1/(1 + r) tends to 1, the Cobb-Douglas case. The Leontief case is r tending to infinity (elasticity to 0) and perfect substitutes is r tending to -1 (elasticity to infinity).

Question 2 · medium

For Y = A X1^0.4 X2^0.2, with P1 = 50 and P2 = 100, the cost-minimising input ratio X2/X1 is

  1. 4
  2. 0.25
  3. 1
  4. 0.5
Answer and working

B. 0.25

Tangency: (b1/b2)(X2/X1) = P1/P2, so X2/X1 = (b2/b1)(P1/P2) = (0.2/0.4)(50/100) = 0.5 x 0.5 = 0.25. Inverting the price ratio gives 1, inverting both ratios gives 4, and ignoring prices gives 0.5. The answer does not depend on output, so the expansion path is a ray.

Question 3 · medium

In the Lagrangian for minimising C = P1X1 + P2X2 subject to f(X1, X2) = Y0, the multiplier at the optimum measures

  1. the marginal cost of producing one more unit of output
  2. the average cost of output
  3. the marginal product of X1
  4. the profit per unit of output
Answer and working

A. the marginal cost of producing one more unit of output

The first-order conditions give lambda = P1/f1 = P2/f2, the cost of the input needed for one more unit of output: marginal cost. It is not an average, and it is the reciprocal of MPP per unit of money, not MPP itself.

Question 4 · medium

A production function is homogeneous of degree 0.8. If all inputs are doubled, output

  1. rises by a factor of 1.741
  2. rises by a factor of 1.6
  3. doubles
  4. rises by a factor of 2.378
Answer and working

A. rises by a factor of 1.741

Homogeneous of degree k: f(tX) = t^k f(X) = 2^0.8 = 1.741. Multiplying 2 x 0.8 = 1.6 is the common slip.

Question 5 · medium

In the stochastic frontier model ln Y = f(X) + v - u, the component u represents

  1. random noise such as weather and measurement error
  2. technical inefficiency, a one-sided non-negative term
  3. allocative inefficiency
  4. the return to scale
Answer and working

B. technical inefficiency, a one-sided non-negative term

v is symmetric noise; u >= 0 is inefficiency that pushes output below the frontier. TE = exp(-u). The model was proposed by Aigner, Lovell and Schmidt (1977) and Meeusen and van den Broeck (1977).

Question 6 · hard

Two enterprises have income standard deviations 30 and 40 and correlation -0.5. A plan puts half the resources in each. The standard deviation of the plan's income is approximately

  1. 18
  2. 35
  3. 25
  4. 325
Answer and working

A. 18

Variance = (0.5^2)(30^2) + (0.5^2)(40^2) + 2(0.5)(0.5)(-0.5)(30)(40) = 225 + 400 -300 = 325; SD = 18. The weighted average 35 holds only with correlation +1; ignoring the covariance gives 25; 325 is the variance.

Question 7 · hard

The Arrow-Pratt coefficient of absolute risk aversion is

  1. -U''(W)/U'(W)
  2. U'(W)/U(W)
  3. -U'(W)/U''(W)
  4. U''(W) x W
Answer and working

A. -U''(W)/U'(W)

r(W) = -U''/U'. It is positive for a concave (risk-averse) utility function. Multiplying by W gives relative risk aversion, -W U''/U'.

Question 8 · hard

The household model helps explain why a rise in the market price of a staple food crop may raise production but increase marketed surplus by less than expected. The reason is that

  1. higher profit raises household income, which raises the household's own consumption of the crop
  2. higher prices always reduce production
  3. the production function shifts downward because the household withdraws its own labour from farming
  4. the household becomes a net buyer of labour and must pay higher wages out of the extra revenue
Answer and working

A. higher profit raises household income, which raises the household's own consumption of the crop

The profit effect raises income, and if the crop is a normal good the household eats more of it, offsetting part of the production increase in the marketed surplus.

Question 9 · hard

Which property does the profit function pi(p, w) have?

  1. Concave in prices
  2. Non-increasing in output price
  3. Homogeneous of degree zero in all prices
  4. Convex in prices and homogeneous of degree one in all prices together
Answer and working

D. Convex in prices and homogeneous of degree one in all prices together

Profit rises with output price, falls with input prices, is convex in prices (the firm adjusts to price changes, so profit rises at least linearly) and is linearly homogeneous. Input and output quantities, not profit, are homogeneous of degree zero in prices.

Question 10 · hard

A single-output, single-input farm has profit function pi(p, w) = p^2/(4w). At p = 12 and w = 3, the profit-maximising output is

  1. 12
  2. 4
  3. 2
  4. 1
Answer and working

C. 2

Hotelling: y = d pi/dp = 2p/(4w) = p/(2w) = 12/6 = 2. 12 is profit itself; 4 is the input demand x = -d pi/dw = p^2/(4w^2). 1 drops the 2 from differentiating p^2 (p/(4w)).

A study plan for Agricultural Production Economics in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (60% of the 57 questions): Duality among production, cost and profit functions (9, 16%); Technical and allocative efficiency and production frontiers (7, 12%); Forms of production function and their estimation (6, 11%); Theory of the family farm (6, 11%); Types of risk and enterprise combination under risk (6, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Cost minimisation (4, 7%); Technological change (4, 7%); Economies of scale and size (3, 5%); Optimum input use: MVP equals MFC (3, 5%); Factor-factor relationship (2, 4%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Isoquants and isoclines (2, 4%); Law of variable proportions and the three stages of production (2, 4%); Factor-product relationship (1, 2%); Product-product relationship (1, 2%); Scope of production economics compared with farm management (1, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Law of variable proportions and the three stages of production (2 hard of 2), Factor-product relationship (1 hard of 1), Product-product relationship (1 hard of 1).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Technological change (1 easy of 4); Theory of the family farm (1 easy of 6).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Agricultural Production Economics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.