LAISHA
Open Laisha

Certified Cheese Professional Cheese Science & Technology: practice questions

Certified Cheese Professional (CCP) · USA · American Cheese Society

Original practice questions written to the published syllabus · not past papers
10worked here, free
39written to this exam in this subject
12syllabus units

About Certified Cheese Professional

Certified Cheese Professional (CCP) is a professional certification run by American Cheese Society, for candidates in USA. 150 multiple-choice questions, up to 3 hours; paper-based in person, live remote proctoring, or at a Prometric centre.

Source: cheesesociety.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Cheese Science & Technology in Certified Cheese Professional

Milk, cheesemaking, ripening, assessment and evaluation, and food safety domains: practical knowledge of how variety families are made and ripened and how defects arise.

Cheese from milk selection to ripening and processed cheese: coagulation, curd handling, salting, ripening, yield and the major variety families.

Our 39 Certified Cheese Professional questions in this subject: 13 easy, 25 medium, 1 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Certified Cheese Professional and are not shown on any other exam's page.

Question 1 · medium

Extract of cardoon (Cynara cardunculus) flowers is traditionally used as coagulant for:

  1. English Cheddar made with calf rennet and dry salting
  2. Indian paneer made by heat-acid coagulation of buffalo milk
  3. Some Iberian sheep-milk cheeses with a soft, creamy texture
  4. Swiss Emmental made from cow's milk with a high cook
Answer and working

C. Some Iberian sheep-milk cheeses with a soft, creamy texture

Cardoon coagulant gives the soft texture of some Portuguese and Spanish sheep-milk cheeses. Paneer uses acid, not an enzyme; Emmental and Cheddar traditionally use calf rennet or substitutes.

Question 2 · easy

Why is coagulant diluted in cold, chlorine-free water just before it is added to the vat?

  1. Chlorine is needed to activate the enzyme, so tap water is preferred
  2. Dilution in brine prevents the enzyme from binding to the curd
  3. Chlorine and long standing in dilute form inactivate the enzyme
  4. Warm dilution water is needed to start the aggregation phase early
Answer and working

C. Chlorine and long standing in dilute form inactivate the enzyme

Chlorine oxidises and inactivates coagulant proteases, and dilute enzyme loses activity on standing, so it is diluted cold just before use. Brine is not used for dilution.

Question 3 · medium

What is the likely consequence of cutting a rennet gel too early, while it is still weak?

  1. A tough gel that traps whey and gives high-moisture cheese
  2. No effect on yield, only a slight delay before cooking starts
  3. A very dry cheese with higher yield because whey drains faster
  4. Shattered curd with more fat and casein fines lost in the whey
Answer and working

D. Shattered curd with more fat and casein fines lost in the whey

A weak gel shatters on cutting and loses fines and fat. Cutting too late, not too early, gives a firm gel that releases whey poorly.

Question 4 · easy

Which is NOT a function of salt in cheese?

  1. Supplying the calcium that firms the curd network
  2. Slowing and finally stopping starter activity in the curd
  3. Controlling growth of spoilage and pathogenic organisms
  4. Drawing whey from the curd and finishing syneresis
Answer and working

A. Supplying the calcium that firms the curd network

Salt (NaCl) supplies no calcium; it controls microbes, finishes syneresis and stops starters. Calcium for the network comes from the milk or added calcium chloride.

Question 5 · medium

Under the U.S. standard of identity, Cheddar must have:

  1. No more than 52% moisture and at least 30% fat in dry matter
  2. No more than 39% moisture and at least 50% fat in dry matter
  3. No more than 39% moisture and at least 50% fat on the whole cheese
  4. No more than 45% moisture and at least 40% fat in dry matter
Answer and working

B. No more than 39% moisture and at least 50% fat in dry matter

The U.S. Cheddar standard sets moisture ≤ 39% and FDM ≥ 50%; other countries set their own limits. 50% fat on the whole cheese would be far richer than Cheddar.

Question 6 · medium

Small eyes in Gouda and Edam are produced mainly by:

  1. Air trapped mechanically during dry salting of curd
  2. Yeasts on the rind producing gas that diffuses inward
  3. Citrate-fermenting mesophilic starter strains producing CO2
  4. Propionibacteria held in a warm room at about 22 °C for weeks
Answer and working

C. Citrate-fermenting mesophilic starter strains producing CO2

Dutch-type starters include citrate-fermenting Lactococcus and Leuconostoc strains whose CO2 forms a few small eyes. Propionic eyes are typical of Swiss types.

Question 7 · medium

Roquefort is made from:

  1. Goat's milk, stored in brine without any mould culture at all
  2. Pasteurised cow's milk, ripened with Penicillium camemberti
  3. Buffalo milk, stretched in hot water and eaten fresh
  4. Raw sheep's milk, ripened in caves with Penicillium roqueforti
Answer and working

D. Raw sheep's milk, ripened in caves with Penicillium roqueforti

Roquefort is a protected French blue cheese from raw ewe's milk. P. camemberti is a white surface mould; brined goat cheese and stretched buffalo cheese are different families.

Question 8 · medium

Washed-rind (smear) cheeses develop their orange, sticky rind because:

  1. Blue mould grows inside the paste and colours the rind as it reaches the surface
  2. Propionibacteria ferment lactate at the rind and form a coloured film of propionate
  3. Yeasts first raise the surface pH, then coryneform bacteria such as Brevibacterium grow
  4. Annatto is added to the brine, and it binds to the rind protein over several weeks
Answer and working

C. Yeasts first raise the surface pH, then coryneform bacteria such as Brevibacterium grow

Salt-tolerant yeasts such as Debaryomyces hansenii deacidify the surface, allowing pigmented coryneforms to grow. Annatto is a colour sometimes added to milk, not the cause of smear.

Question 9 · easy

Late blowing in Gouda and Emmental is caused by:

  1. Coliform bacteria fermenting lactose in the first day after the cheese is made
  2. Yeasts on the rind fermenting the salt into gas during the brining stage
  3. Propionic bacteria producing too many round eyes in the warm ripening room
  4. Clostridium tyrobutyricum spores fermenting lactate to butyrate and gas
Answer and working

D. Clostridium tyrobutyricum spores fermenting lactate to butyrate and gas

Clostridial spores survive pasteurisation and later ferment lactate, causing cracks and a butyric smell. Coliforms cause early blowing.

Question 10 · medium

Mould growing under the film of vacuum-packed cheese most likely indicates:

  1. Too long a pressing time
  2. Too much salt in the cheese
  3. A coagulant overdose in the cheese vat
  4. A leak or pinhole that let air in
Answer and working

D. A leak or pinhole that let air in

Moulds need oxygen; growth under film points to failed sealing or pinholes. Salt, pressing and coagulant are not the cause.

A study plan for Cheese Science & Technology in Certified Cheese Professional

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (54% of the 39 questions): Varieties: Cheddar, Gouda, Swiss types, Mozzarella, Parmesan, blue and soft cheeses (9, 23%); Cheese defects and grading (4, 10%); Coagulants: calf rennet, microbial, fermentation-produced chymosin, plant (4, 10%); Cutting, cooking and syneresis (4, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Salting: dry, brine and its effect (4, 10%); Cheddaring, pasta filata stretching and other curd treatments (3, 8%); Ripening and accelerated ripening (3, 8%); Milk quality and pre-treatment for cheese (2, 5%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Processed cheese and cheese spreads: emulsifying salts (2, 5%); Rennet coagulation and gel formation (2, 5%); Cheese yield: formulas and factors (1, 3%); Fresh cheeses: cottage, cream cheese, quark, queso fresco, paneer (1, 3%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Varieties: Cheddar, Gouda, Swiss types, Mozzarella, Parmesan, blue and soft cheeses (1 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Coagulants: calf rennet, microbial, fermentation-produced chymosin, plant (2 easy of 4); Cutting, cooking and syneresis (2 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Certified Cheese Professional Cheese Science & Technology

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.