LAISHA
Open Laisha

Food Safety Officer recruitment Microbiological Quality Assurance & Rapid Methods: practice questions

Food Safety Officer recruitment (state PSCs and FSSAI) · India · State public service commissions; FSSAI for central posts

Original practice questions written to the published syllabus · not past papers
10worked here, free
23written to this exam in this subject
8syllabus units

About Food Safety Officer recruitment

Food Safety Officer recruitment (state PSCs and FSSAI) is a government recruitment exam run by State public service commissions; FSSAI for central posts, for candidates in India. Each commission sets its own written test.

Official site: fssai.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Microbiological Quality Assurance & Rapid Methods in Food Safety Officer recruitment

How dairy laboratories sample, count, detect and certify: criteria, indicator organisms, rapid methods and lab quality systems.

Our 23 Food Safety Officer recruitment questions in this subject: 17 easy, 5 medium, 1 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Food Safety Officer recruitment and are not shown on any other exam's page.

Question 1 · easy

A microbiological criterion that is mandatory because it is written into law or regulation is called a:

  1. Performance objective set by a company
  2. Standard
  3. Guideline used to judge hygiene
  4. Specification agreed in a purchase contract
Answer and working

B. Standard

Standards are mandatory; guidelines are advisory; specifications are contractual between buyer and supplier.

Question 2 · easy

If a lot fails a food safety criterion, the predefined action is normally:

  1. Lowering the limit for that lot
  2. Rejection, reprocessing or recall of the lot
  3. Repeating the test until a pass is obtained
  4. Ignoring the result if the plant is certified
Answer and working

B. Rejection, reprocessing or recall of the lot

Retesting into compliance is not acceptable; the lot is withdrawn, reprocessed or rejected.

Question 3 · easy

Coliforms in pasteurised milk most commonly indicate:

  1. Thermoduric spores in raw milk
  2. Recontamination
  3. Proper cleaning of the filler
  4. Mastitis in the herd
Answer and working

B. Recontamination

Coliforms are killed by pasteurisation, so their presence indicates recontamination, or less commonly inadequate heating.

Question 4 · easy

Membrane filtration is the method of choice when the sample is:

  1. A solid cheese
  2. A powdered sample with high counts
  3. A large volume of clear liquid such as water
  4. An agar slope
Answer and working

C. A large volume of clear liquid such as water

The filter concentrates organisms from large volumes and is then placed on a medium.

Question 5 · easy

The usual sequence in cultural detection of a pathogen is:

  1. Direct plating only, without enrichment
  2. Pre-enrichment, selective enrichment, plating, confirmation
  3. Confirmation first, then enrichment
  4. Selective plating, then pre-enrichment, then serological confirmation
Answer and working

B. Pre-enrichment, selective enrichment, plating, confirmation

Enrichment resuscitates injured cells and increases target numbers before isolation and confirmation.

Question 6 · easy

ATP bioluminescence produces light through the action of:

  1. Luciferase on luciferin in the presence of ATP
  2. Catalase on hydrogen peroxide
  3. DNA polymerase on primers
  4. Beta-galactosidase acting on lactose in the swab buffer
Answer and working

A. Luciferase on luciferin in the presence of ATP

Light, measured as relative light units, is proportional to ATP from cells and food residues.

Question 7 · medium

Lateral flow devices for pathogen screening give a result within:

  1. One month
  2. Seven days
  3. Minutes, on enriched cultures
  4. Minutes, on unenriched 25 g samples
Answer and working

C. Minutes, on enriched cultures

They are immunochromatographic strips used after enrichment.

Question 8 · easy

In environmental monitoring, zone 1 comprises:

  1. Food-contact surfaces
  2. Floors and drains in the processing room
  3. Equipment frames near product
  4. Locker rooms and corridors
Answer and working

A. Food-contact surfaces

Zone 1 is product contact; zone 2 is adjacent non-contact; zone 3 is remote surfaces in the room; zone 4 is outside the room.

Question 9 · medium

Environmental swabs are moistened with neutralising broth to:

  1. Make the swab sterile
  2. Kill all organisms on the surface
  3. Add nutrients for Listeria growth on the surface
  4. Inactivate residual sanitiser
Answer and working

D. Inactivate residual sanitiser

Residual quaternary ammonium or chlorine would otherwise kill organisms before analysis.

Question 10 · easy

Contaminated cultures are usually decontaminated before disposal by autoclaving at:

  1. 121 °C for 15–20 min or longer
  2. 100 °C for 1 min
  3. 72 °C for 15 s
  4. 63 °C for 30 min
Answer and working

A. 121 °C for 15–20 min or longer

Moist heat at 121 °C kills spores; larger waste loads need longer times.

A study plan for Microbiological Quality Assurance & Rapid Methods in Food Safety Officer recruitment

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 23 questions): Biosafety levels and good microbiological practice (4, 17%); Indicator organisms: coliforms, Enterobacteriaceae, E. coli (4, 17%); Laboratory accreditation: ISO/IEC 17025 (3, 13%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Microbiological criteria and how they are set (3, 13%); Standard plate count and other enumeration methods (3, 13%); Detection and isolation of pathogens (2, 9%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Environmental monitoring programmes (2, 9%); Rapid methods: ATP bioluminescence, PCR, real-time PCR, immunoassays (2, 9%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Laboratory accreditation: ISO/IEC 17025 (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Indicator organisms: coliforms, Enterobacteriaceae, E. coli (4 easy of 4); Microbiological criteria and how they are set (3 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Food Safety Officer recruitment Microbiological Quality Assurance & Rapid Methods

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.