LAISHA
Open Laisha

GIS Professional Forest GIS, GNSS & LiDAR Analytics: practice questions

GIS Professional (GISP) · International · GIS Certification Institute

Original practice questions written to the published syllabus · not past papers
10worked here, free
19written to this exam in this subject
6syllabus units

About GIS Professional

GIS Professional (GISP) is a professional certification run by GIS Certification Institute, for candidates worldwide. Portfolio of education, experience and contributions plus a geospatial core technical knowledge exam.

Official site: gisci.org.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest GIS, GNSS & LiDAR Analytics in GIS Professional

Spatial data and analysis for forest management: GIS data models, spatial analysis, GNSS, airborne and terrestrial LiDAR, and the digital tools of precision forestry. General remote sensing and GIS for land and water is in the Agricultural Engineering track (remote-sensing-gis).

Our 19 GIS Professional questions in this subject: 5 easy, 12 medium, 2 hard, across 6 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to GIS Professional and are not shown on any other exam's page.

Question 1 · medium

A plot centre lies at longitude 37.5° E. In which UTM zone is it?

  1. 37
  2. 36
  3. 38
  4. 7
Answer and working

A. 37

Zone = floor((longitude + 180) ÷ 6) + 1 = floor(217.5 ÷ 6) + 1 = 36 + 1 = 37. Using the floor without adding 1 gives 36.

Question 2 · medium

Why is a false easting of 500,000 m assigned to each UTM zone's central meridian?

  1. To keep all eastings in the zone positive
  2. To make the zone conformal at its edges
  3. To convert the datum from local to WGS 84
  4. To equalise the scale factor across the zone
Answer and working

A. To keep all eastings in the zone positive

Points west of the central meridian would otherwise have negative eastings. The false easting does not change scale or datum; the scale factor 0.9996 on the central meridian handles distortion.

Question 3 · easy

Tiny polygons that appear along shared boundaries after overlaying two independently digitised layers are called:

  1. Sliver polygons
  2. Dangling nodes
  3. Pseudo nodes
  4. Donut polygons
Answer and working

A. Sliver polygons

Slivers form where two versions of the same boundary do not coincide. Dangling nodes are unconnected line ends; pseudo nodes join only two lines; a donut polygon has a hole.

Question 4 · hard

Before deriving a stream network from a DEM, small depressions are filled. Why?

  1. Spurious sinks would stop flow and break the network
  2. Filling smooths the slopes so that aspect can then be calculated
  3. Depressions make the DEM file too large to process
  4. Filling converts the DSM into a bare-earth DTM
Answer and working

A. Spurious sinks would stop flow and break the network

Artificial pits trap flow, so accumulation stops and streams are fragmented. Filling does not remove vegetation or change a DSM into a DTM.

Question 5 · medium

A cell scores 0.8 for slope, 0.4 for access and 0.6 for soil (standardised 0–1), with weights 0.5, 0.3 and 0.2. Its WLC suitability is:

  1. 0.60
  2. 0.64
  3. 1.80
  4. 0.40
Answer and working

B. 0.64

0.5 × 0.8 + 0.3 × 0.4 + 0.2 × 0.6 = 0.40 + 0.12 + 0.12 = 0.64. 0.60 is the unweighted mean; 1.80 is the unweighted sum.

Question 6 · easy

Before combining distance to road (metres) and soil fertility (index) in MCA, factors are:

  1. Multiplied together without any rescaling
  2. Converted to Boolean yes/no layers in all cases
  3. Added in their original units
  4. Standardised to a common scale such as 0–1
Answer and working

D. Standardised to a common scale such as 0–1

Factors in different units must be standardised, by linear rescaling or fuzzy functions, before weighting.

Question 7 · medium

An analyst wants to read only one small window of a very large image stored online without downloading it all. Which format feature makes this possible?

  1. A compressed archive of the whole image
  2. Conversion of the image to a vector layer
  3. A printed map of the image at small scale
  4. A cloud-optimised raster with internal tiles
Answer and working

D. A cloud-optimised raster with internal tiles

Cloud-optimised formats are internally tiled with overviews so that clients request only the needed byte ranges.

Question 8 · easy

Which colour scheme suits a map of change in canopy height, with losses and gains around zero?

  1. Sequential
  2. Qualitative
  3. Single-hue binary
  4. Diverging
Answer and working

D. Diverging

Diverging schemes use two hues meeting at a neutral midpoint. Sequential schemes suit values from low to high; qualitative suit categories.

Question 9 · medium

A choropleth map of districts shows total timber volume, so the largest districts look darkest. The better choice is to map:

  1. Total volume with more classes
  2. Total volume in a qualitative scheme
  3. District area in a sequential scheme
  4. Volume per hectare
Answer and working

D. Volume per hectare

Choropleths should map rates or densities; totals are driven by area. Adding classes or changing scheme does not fix the problem.

Question 10 · medium

200 stands are classified into 5 classes of volume by the quantile method. Each class contains:

  1. 40 stands
  2. 5 stands
  3. 20 stands
  4. Classes of equal width, so it varies
Answer and working

A. 40 stands

Quantile classes have equal numbers of features: 200 ÷ 5 = 40. Equal-width classes describe the equal-interval method.

A study plan for Forest GIS, GNSS & LiDAR Analytics in GIS Professional

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (42% of the 19 questions): GIS concepts: vector and raster data, projections, datums (4, 21%); Map production and cartographic standards (4, 21%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Forest stand and compartment databases (3, 16%); Spatial analysis: overlay, buffer, terrain analysis (3, 16%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Spatial decision support and multi-criteria analysis (3, 16%); Open data and cloud platforms for forest monitoring (2, 11%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Spatial analysis: overlay, buffer, terrain analysis (1 hard of 3), GIS concepts: vector and raster data, projections, datums (1 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Spatial decision support and multi-criteria analysis (2 easy of 3); Map production and cartographic standards (2 easy of 4).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — GIS Professional Forest GIS, GNSS & LiDAR Analytics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.