LAISHA
Open Laisha

SAF Certified Forester Forest GIS, GNSS & LiDAR Analytics: practice questions

SAF Certified Forester (CF) · USA · Society of American Foresters

Original practice questions written to the published syllabus · not past papers
10worked here, free
18written to this exam in this subject
9syllabus units

About SAF Certified Forester

SAF Certified Forester (CF) is a professional certification run by Society of American Foresters, for candidates in USA. Eligibility by education and experience (details in the SAF Certification Handbook), then the CF exam written to a published domain and knowledge-area outline. Recertification every three years with 45 continuing forestry education hours (at least 30 in Category 1-CF).

Source: eforester.org.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Forest GIS, GNSS & LiDAR Analytics in SAF Certified Forester

Spatial data and analysis for forest management: GIS data models, spatial analysis, GNSS, airborne and terrestrial LiDAR, and the digital tools of precision forestry. General remote sensing and GIS for land and water is in the Agricultural Engineering track (remote-sensing-gis).

Our 18 SAF Certified Forester questions in this subject: 3 easy, 9 medium, 6 hard, across 9 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to SAF Certified Forester and are not shown on any other exam's page.

Question 1 · hard

Two layers of the same forest are overlaid and the roads are offset by about 150 m in a consistent direction. The most likely cause is:

  1. One layer was digitised from a larger-scale map sheet than the other
  2. The raster layer has a cell size that is too coarse
  3. The layers use different datums with no transformation applied
  4. The attribute tables use different primary key fields
Answer and working

C. The layers use different datums with no transformation applied

A consistent shift of tens to hundreds of metres is typical of a datum mismatch. Scale differences cause irregular, not uniform, offsets; attribute keys do not move geometry.

Question 2 · easy

In a forest stand database, a field whose value uniquely identifies each stand record is the:

  1. Primary key
  2. Foreign key
  3. Domain
  4. Join table
Answer and working

A. Primary key

A primary key is unique per record. A foreign key in another table refers to that primary key; a domain restricts allowed values.

Question 3 · hard

Why should historical stand boundaries be kept rather than overwritten when a stand is harvested and split?

  1. Old boundaries are always more accurate than new ones
  2. Legal rules forbid deleting any polygon in any country
  3. Overwriting would change the coordinate reference system
  4. Growth, carbon and audit records refer to past units
Answer and working

D. Growth, carbon and audit records refer to past units

Treatment history, carbon accounts and certification audits must be traceable to the units that existed at the time. Retaining history is good practice, not a universal legal rule.

Question 4 · medium

Which field practice most improves GNSS plot-centre accuracy under dense canopy?

  1. Taking a single fix as soon as the receiver locks
  2. Disabling all constellations except one
  3. Setting the elevation mask to zero degrees
  4. Logging many fixes with an antenna raised on a pole
Answer and working

D. Logging many fixes with an antenna raised on a pole

Averaging many fixes and raising the antenna above understorey reduce error. Using fewer constellations reduces visible satellites; a zero mask admits low, noisy signals.

Question 5 · medium

Which trees are most often missed by individual-tree detection from airborne LiDAR?

  1. Tall emergent conifers with clear apexes
  2. Dominant trees along stand edges
  3. Suppressed and understorey trees
  4. Isolated trees in open parkland
Answer and working

C. Suppressed and understorey trees

Lower trees hidden under the upper canopy cause omission errors; tall, distinct crowns are detected best.

Question 6 · easy

Which close-range platform gives the highest point densities from above over a small research block?

  1. Spaceborne laser altimetry (photon counting)
  2. Airborne scanning from 3,000 m
  3. Drone (UAV) laser scanning
  4. Single-scan TLS from the block edge
Answer and working

C. Drone (UAV) laser scanning

Low-flying drones give hundreds of points per m² over small areas. Spaceborne systems sample sparse footprints; one TLS scan from the edge sees little of the interior.

Question 7 · medium

A key property of weighted linear combination is that it:

  1. Selects only those cells that pass every single criterion threshold
  2. Lets a high score on one factor offset a low score on another
  3. Ignores the weights when factors are standardised
  4. Requires every factor to be measured in the same unit
Answer and working

B. Lets a high score on one factor offset a low score on another

WLC is fully compensatory. Boolean overlay (all criteria must pass) allows no trade-off; standardisation removes unit differences before weighting.

Question 8 · hard

Why do adjacency (green-up) constraints make harvest scheduling much harder to solve?

  1. They link decisions on neighbouring stands into integer choices
  2. They remove the need to project stand growth through the planning horizon
  3. They require every stand to be cut in the first period
  4. They make the objective function nonlinear in prices
Answer and working

A. They link decisions on neighbouring stands into integer choices

Adjacency rules turn the problem into a large integer programme in which each stand's decision depends on its neighbours; heuristics such as simulated annealing or tabu search are often used.

Question 9 · medium

Why might an agency withhold or generalise the locations of nesting sites of a rare forest raptor in an open-data release?

  1. Raptor data cannot be stored in any GIS format
  2. Open licences prohibit the release of any wildlife data
  3. Precise locations could expose the birds to disturbance or poaching
  4. Generalising points increases the positional accuracy of the released data
Answer and working

C. Precise locations could expose the birds to disturbance or poaching

Sensitive data are a recognised exception to open release; generalising positions protects the species while still sharing useful information.

Question 10 · hard

Why should red and green not be the only contrast distinguishing two categories on a field map?

  1. Common colour-vision deficiencies make them hard to tell apart
  2. Red and green inks fade in sunlight within a few hours of field use
  3. International rules ban red on forest maps
  4. Green is reserved for water bodies
Answer and working

A. Common colour-vision deficiencies make them hard to tell apart

Red–green colour deficiency is common, especially among men; adding differences in lightness, pattern or symbol shape keeps the map readable.

A study plan for Forest GIS, GNSS & LiDAR Analytics in SAF Certified Forester

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (50% of the 18 questions): Forest stand and compartment databases (4, 22%); Spatial decision support and multi-criteria analysis (3, 17%); Area-based and individual-tree LiDAR inventory (2, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: GNSS data collection and accuracy (2, 11%); Spatial analysis: overlay, buffer, terrain analysis (2, 11%); Terrestrial and mobile laser scanning (2, 11%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: GIS concepts: vector and raster data, projections, datums (1, 6%); Map production and cartographic standards (1, 6%); Open data and cloud platforms for forest monitoring (1, 6%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: GIS concepts: vector and raster data, projections, datums (1 hard of 1), Map production and cartographic standards (1 hard of 1), Forest stand and compartment databases (2 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Forest stand and compartment databases (2 easy of 4); Terrestrial and mobile laser scanning (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — SAF Certified Forester Forest GIS, GNSS & LiDAR Analytics

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.