SAF Certified Forester Growth & Yield Modelling: practice questions
SAF Certified Forester (CF) · USA · Society of American Foresters
Original practice questions written to the published syllabus · not past papers
10worked here, free
20written to this exam in this subject
10syllabus units
About SAF Certified Forester
SAF Certified Forester (CF) is a professional certification run by Society of American Foresters, for candidates in USA. Eligibility by education and experience (details in the SAF Certification Handbook), then the CF exam written to a published domain and knowledge-area outline. Recertification every three years with 45 continuing forestry education hours (at least 30 in Category 1-CF).
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Growth & Yield Modelling in SAF Certified Forester
Applied use of growth and yield models, stand density index, relative density thresholds, density management diagrams and the use of projections in harvest scheduling.
Predicting how stands grow and what they will yield: yield tables, stand density, diameter-distribution and individual-tree models, and their use in planning.
Our 20 SAF Certified Forester questions in this subject: 5 easy, 12 medium, 3 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to SAF Certified Forester and are not shown on any other exam's page.
Question 1 · medium
A managed-stand yield table differs from a normal table because it:
Lists yields for unthinned, fully stocked stands only
Lists yields for stands of every possible density, from open to fully stocked
Lists yields only for uneven-aged selection forests
Lists main-crop and thinning yields for one stated thinning regime
Answer and working
D. Lists main-crop and thinning yields for one stated thinning regime
Managed-stand tables, such as British management tables, follow a defined thinning regime and separate thinnings from the main crop.
Question 2 · easy
Using the metric form SDI = N(Dq/25.4)^1.605, what is the stand density index of a stand with 900 stems/ha and a quadratic mean diameter of 20 cm?
1321
709
2738
613
Answer and working
D. 613
SDI = 900 × (20/25.4)^1.605 = 900 × 0.6814 = 613. Inverting the ratio gives 1321; omitting the exponent gives 709; using the US reference of 10 with centimetres gives 2736.
Question 3 · easy
A manager wants to keep a plantation fully using the site without competition mortality. Using Long's thresholds, the relative density should be kept roughly between:
0% and 25% of maximum SDI
35% and 60% of maximum SDI
60% and 100% of maximum SDI
25% and 35% of maximum SDI
Answer and working
B. 35% and 60% of maximum SDI
Above about 35% the site is fully occupied; above about 60% self-thinning mortality begins. Keeping stands between these uses the site while avoiding loss to mortality.
Question 4 · medium
A projection system is path invariant when:
It predicts the same volume on all sites at the same age
Projecting directly from age 10 to 30 equals projecting 10 to 20 then 20 to 30
Its growth equations were all fitted by ordinary least squares
It projects basal area forward in time but never backward to an earlier age
Answer and working
B. Projecting directly from age 10 to 30 equals projecting 10 to 20 then 20 to 30
Path invariance means the result does not depend on the number of steps. It is a desirable property alongside compatibility.
Question 5 · hard
In the parameter recovery method, Weibull parameters are obtained by:
Solving for them from stand attributes predicted by a whole-stand model
Regressing fitted parameters directly on age, site and density
Regressing fitted parameters directly on age, site and stand density measures
Using one fixed set of parameters for all stands of a species
Answer and working
A. Solving for them from stand attributes predicted by a whole-stand model
Recovery solves the parameters from predicted moments or percentiles (for example Dq), so the distribution matches stand-level predictions. Direct regression is the parameter prediction method.
Question 6 · medium
Diameter-distribution models are least suited to which stands?
Mixed or recently thinned stands with irregular, multimodal distributions
Stands whose diameters closely follow a Weibull curve
Answer and working
A. Mixed or recently thinned stands with irregular, multimodal distributions
Simple unimodal distributions cannot represent irregular, multimodal diameter structures without more flexible methods.
Question 7 · medium
Mortality in individual-tree models is usually modelled as:
A fixed percentage of trees removed every year in every stand
A probability of death, often by logistic regression
A fixed percentage of trees, commonly 1%, removed every year in every stand
A function of tree species alone, ignoring size and competition
Answer and working
B. A probability of death, often by logistic regression
Survival or death is binary, so a probability model (often logistic on size, growth, crown ratio and competition) is fitted to remeasured plot data.
Question 8 · medium
A hybrid growth model typically:
Combines two yield tables from different countries
Uses only remote sensing, with no field data
Adds physiologically based modifiers to an empirical growth model
Replaces all equations with expert opinion
Answer and working
C. Adds physiologically based modifiers to an empirical growth model
Hybrids keep empirical accuracy while adding climate or soil sensitivity through process-based terms.
Question 9 · medium
The most common cause of serious error when using a growth model is:
Extrapolation beyond the ages, sites or densities in its data
Rounding diameters to the nearest centimetre instead of the nearest millimetre
Using metric rather than imperial units
Using a computer rather than printed tables
Answer and working
A. Extrapolation beyond the ages, sites or densities in its data
Models are reliable only within the range of their data; extrapolation leads to the largest errors.
Question 10 · hard
In a Model I linear-programming harvest schedule, each decision variable represents:
The area of a stand assigned to one complete regime over the horizon
The area moving from one age class to the next in each period of the horizon
The price of timber in a particular period
The number of trees cut in a single compartment in one year
Answer and working
A. The area of a stand assigned to one complete regime over the horizon
Model I variables are whole management regimes per stand; Model II variables are age-class transitions, with regenerated areas forming new units.
A study plan for Growth & Yield Modelling in SAF Certified Forester
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (55% of the 20 questions): Stand density measures: stand density index, relative spacing, crown competition factor (4, 20%); Using growth models in harvest scheduling (3, 15%); Diameter-distribution models (2, 10%); Individual-tree distance-independent and distance-dependent models (2, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Model fitting, validation and projection (2, 10%); Self-thinning rule and density management diagrams (2, 10%); Whole-stand models (2, 10%); Growth curves and growth functions (1, 5%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Normal, empirical and variable-density yield tables (1, 5%); Process-based and hybrid models (1, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Diameter-distribution models (1 hard of 2), Whole-stand models (1 hard of 2), Using growth models in harvest scheduling (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Stand density measures: stand density index, relative spacing, crown competition factor (3 easy of 4); Model fitting, validation and projection (1 easy of 2).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.