Indian Forest Service Examination Growth & Yield Modelling: practice questions
Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
27written to this exam in this subject
10syllabus units
About Indian Forest Service Examination
Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Growth & Yield Modelling in Indian Forest Service Examination
Predicting how stands grow and what they will yield: yield tables, stand density, diameter-distribution and individual-tree models, and their use in planning.
Our 27 Indian Forest Service Examination questions in this subject: 4 easy, 15 medium, 8 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.
Question 1 · easy
In the Chapman-Richards function Y = A(1 − e^(−kt))^c, the parameter A represents:
The asymptote, the maximum size approached at great age
The rate at which the curve approaches its maximum value over time
The shape of the curve and the position of its inflection point
The age at which the current annual increment reaches its peak
Answer and working
A. The asymptote, the maximum size approached at great age
A is the upper asymptote; k is the rate parameter; c is the shape parameter controlling the inflection point.
Question 2 · hard
A growth model and a yield model are called compatible when:
They were both fitted to data from the same set of temporary sample plots
Integrating the growth equation over a period gives the change in yield
They use the same site-index curves but different volume equations
The growth model predicts a larger volume than the yield model
Answer and working
B. Integrating the growth equation over a period gives the change in yield
Compatibility (Clutter 1963) means growth is the derivative of yield, so the two give the same answer for any projection. Fitting to the same data does not guarantee it.
Question 3 · medium
A density management diagram usually plots which pair of axes?
Stand age against mean annual increment, plotted on linear axes
Site index against rotation age for each species
Log stems per hectare against log mean tree volume or Dq
Dominant height against crown ratio for each tree
Answer and working
C. Log stems per hectare against log mean tree volume or Dq
DMDs use log N against log mean volume or Dq, overlaid with the maximum-density line, relative-density lines and height isolines.
Question 4 · easy
Distance-dependent individual-tree models require which data that distance-independent models do not?
Stem maps giving the position of each tree
Diameter of each tree at breast height, measured over bark
Site index of the stand
Species of each tree
Answer and working
A. Stem maps giving the position of each tree
Spatial competition indices need tree coordinates. Diameter, site index and species are used by both kinds.
Question 5 · hard
A common finding when distance-dependent and distance-independent models are compared for stand totals is that:
Spatial models are only slightly more accurate, despite costly stem maps
Spatial models are always several times more accurate for stand totals
Distance-independent models cannot predict stand totals at all
Spatial models cannot be used in any planted forest
Answer and working
A. Spatial models are only slightly more accurate, despite costly stem maps
Many comparisons show modest gains for spatial models at stand level, while stem mapping is expensive. They remain valuable for research and irregular stands.
Question 6 · medium
Why do individual-tree models suit mixed, uneven-aged forests better than whole-stand models?
They need no field data and run from climate data alone
They assume all trees are the same age and size
They ignore mortality, which is rare in mixed forests
They represent any mix of species, sizes and treatments tree by tree
Answer and working
D. They represent any mix of species, sizes and treatments tree by tree
By tracking each tree, they handle complex structures and selective treatments that stand-level averages cannot.
Question 7 · medium
A principal advantage claimed for process-based models is that they:
Can in principle predict growth under conditions outside past data, such as climate change
Are always more accurate than empirical models under current conditions, as they may use more data
Need far fewer parameters than empirical models
Require no weather or soil data at all
Answer and working
A. Can in principle predict growth under conditions outside past data, such as climate change
Representing causes makes them potentially valid in new conditions. They are often less accurate than empirical models under current conditions and need many parameters.
Question 8 · hard
For predicting next decade's volume in a well-studied plantation estate under current climate, which model type is usually most appropriate?
A gap model built for long-term succession studies
A process model with many parameters that has never been validated in that region
A normal yield table from a different species
A validated empirical whole-stand or diameter-distribution model
Answer and working
D. A validated empirical whole-stand or diameter-distribution model
Under current conditions with good data, validated empirical models are usually most accurate. Process and gap models suit new conditions or research questions.
Question 9 · hard
A growth model is unbiased over all validation plots but over-predicts on young stands and under-predicts on old ones. What does this show?
The model is valid everywhere because its overall bias is zero
The validation data must contain measurement errors only
A zero overall bias hides systematic errors; check residuals by age, site and density
RMSE alone is enough to judge a model's validity
Answer and working
C. A zero overall bias hides systematic errors; check residuals by age, site and density
Opposite biases in parts of the range cancel in the mean. Residual plots against predictors reveal such patterns.
Question 10 · medium
If a growth model used for harvest scheduling overestimates growth, the likely consequence is:
Scheduled harvests are too low and growing stock rises
No effect at all, because harvest schedules are always revised every single year
Timber prices rise because volumes are underestimated
Scheduled harvests exceed sustainable levels and growing stock declines
Answer and working
D. Scheduled harvests exceed sustainable levels and growing stock declines
Over-optimistic growth inflates the allowable cut; actual growth cannot replace removals, so stocks fall. Regular reinventory and sensitivity analysis guard against this.
A study plan for Growth & Yield Modelling in Indian Forest Service Examination
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (48% of the 27 questions): Normal, empirical and variable-density yield tables (4, 15%); Growth curves and growth functions (3, 11%); Individual-tree distance-independent and distance-dependent models (3, 11%); Model fitting, validation and projection (3, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Process-based and hybrid models (3, 11%); Self-thinning rule and density management diagrams (3, 11%); Stand density measures: stand density index, relative spacing, crown competition factor (3, 11%); Using growth models in harvest scheduling (3, 11%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Diameter-distribution models (1, 4%); Whole-stand models (1, 4%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Growth curves and growth functions (1 hard of 3), Individual-tree distance-independent and distance-dependent models (1 hard of 3), Model fitting, validation and projection (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Diameter-distribution models (1 easy of 1); Growth curves and growth functions (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.