LAISHA
Open Laisha

Indian Forest Service Examination Wood Anatomy & Wood Properties: practice questions

Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
40written to this exam in this subject
11syllabus units

About Indian Forest Service Examination

Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.

Official site: upsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Wood Anatomy & Wood Properties in Indian Forest Service Examination

The structure of wood and how it determines strength, density, durability and use: macroscopic and microscopic identification of timbers and their physical and mechanical properties.

Our 40 Indian Forest Service Examination questions in this subject: 6 easy, 21 medium, 13 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.

Question 1 · hard

Cross-field pits in softwoods connect:

  1. Vessels to fibres in hardwood latewood
  2. Resin canals to bark
  3. Ray parenchyma to axial tracheids
  4. Earlywood to latewood
Answer and working

C. Ray parenchyma to axial tracheids

Their shapes (window-like, pinoid, piceoid, cupressoid, taxodioid) aid identification.

Question 2 · medium

Extractives in wood can affect:

  1. Colour, durability, gluing and finishing
  2. Only the weight of the wood when dry
  3. Nothing in service
  4. Only the bark
Answer and working

A. Colour, durability, gluing and finishing

Some also cause dermatitis in workers.

Question 3 · easy

A wood with basic density 600 kg/m³ has basic specific gravity of:

  1. 6.0
  2. 60
  3. 0.6
  4. 0.06
Answer and working

C. 0.6

Specific gravity = density ÷ density of water (1000 kg/m³).

Question 4 · hard

A quarter-sawn board shrinks less in width than a flat-sawn board because its width is:

  1. Radial
  2. Tangential
  3. Longitudinal
  4. Diagonal to the rings at 45°
Answer and working

A. Radial

Radial shrinkage is about half tangential.

Question 5 · medium

Compression perpendicular to the grain is important where:

  1. Wood is used as a tension tie in a roof truss
  2. Beams rest on supports or rails on sleepers
  3. Wood is used for paper
  4. Wood is burned as fuel
Answer and working

B. Beams rest on supports or rails on sleepers

Bearing areas crush under concentrated load.

Question 6 · medium

Tension wood is characterised by:

  1. Rounded tracheids with high lignin
  2. Gelatinous fibres with a G-layer
  3. Resin canals
  4. Absence of cellulose
Answer and working

B. Gelatinous fibres with a G-layer

The G-layer is cellulose-rich; tension wood gives woolly sawn surfaces.

Question 7 · hard

Interlocked grain, common in dipterocarps and some eucalypts, causes:

  1. Easy splitting along the grain with an axe
  2. No effect on machining
  3. Tearing in planing but attractive ribbon figure
  4. Twisting of every board
Answer and working

C. Tearing in planing but attractive ribbon figure

Alternating spiral direction resists splitting and gives ribbon figure on quarter-sawn faces.

Question 8 · easy

In EN 338, the D classes are strength classes for:

  1. Softwoods
  2. Hardwoods
  3. Bamboo
  4. Plywood
Answer and working

B. Hardwoods

C classes are for softwoods.

Question 9 · hard

Fast-grown plantation teak may differ from natural teak in that its heartwood can be:

  1. Always more durable
  2. Free of extractives entirely
  3. Composed only of sapwood
  4. Less durable
Answer and working

D. Less durable

Durability varies with growth conditions and tree age.

Question 10 · medium

Which of these is a perishable timber needing treatment for exterior use?

  1. Teak
  2. Sal
  3. Mango
  4. Deodar
Answer and working

C. Mango

Mango, semul and poplar are non-durable.

A study plan for Wood Anatomy & Wood Properties in Indian Forest Service Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (43% of the 40 questions): Mechanical properties: bending, compression, hardness (5, 13%); Cell wall structure and chemical composition (4, 10%); Hardwood structure: vessels, fibres, parenchyma; ring-porous and diffuse-porous (4, 10%); Macroscopic and microscopic identification of timbers (4, 10%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Timber grading and the uses of important timbers (4, 10%); Wood-water relations: moisture content, fibre saturation point, shrinkage (4, 10%); Formation of wood: cambium, sapwood and heartwood (3, 8%); Natural defects and reaction wood (3, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Natural durability of timbers (3, 8%); Softwood structure: tracheids, rays, resin canals (3, 8%); Wood density and specific gravity (3, 8%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Hardwood structure: vessels, fibres, parenchyma; ring-porous and diffuse-porous (2 hard of 4), Wood-water relations: moisture content, fibre saturation point, shrinkage (2 hard of 4), Formation of wood: cambium, sapwood and heartwood (1 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Cell wall structure and chemical composition (2 easy of 4); Natural durability of timbers (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Forest Service Examination Wood Anatomy & Wood Properties

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.