LAISHA
Open Laisha

Indian Forest Service Examination Forest Mensuration: practice questions

Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission

Original practice questions written to the published syllabus · not past papers
10worked here, free
27written to this exam in this subject
13syllabus units

About Indian Forest Service Examination

Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.

Official site: upsc.gov.in.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Forest Mensuration in Indian Forest Service Examination

Measuring single trees, logs and stands: diameter, height, form, volume, biomass and growth, with the instruments and formulas used in the field.

Our 27 Indian Forest Service Examination questions in this subject: 1 easy, 16 medium, 10 hard, across 13 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.

Question 1 · medium

How is a diameter tape graduated so that diameter can be read directly from it?

  1. Each 1 cm of diameter is marked every 2 cm of tape
  2. Each 1 cm of diameter is marked every π cm, about 3.14 cm of tape
  3. Each 1 cm of diameter is marked every π/4 cm, about 0.79 cm of tape
  4. Each 1 cm of diameter is marked every 4 cm of tape, as in quarter girth
Answer and working

B. Each 1 cm of diameter is marked every π cm, about 3.14 cm of tape

Girth = π × diameter, so one centimetre of diameter corresponds to π ≈ 3.14 cm of circumference. Marks every 4 cm would read quarter girth, not diameter.

Question 2 · medium

Why does sighting the visible top of a broad-crowned broadleaved tree tend to overestimate its height?

  1. The crown edge is farther from the observer than the stem, so the angle read is too small
  2. Broadleaved crowns refract the line of sight, which bends the reading upwards
  3. The hypsometer reads in percent, which inflates angles above 45 degrees
  4. The sighted crown edge is nearer than the stem, so the distance used is too long
Answer and working

D. The sighted crown edge is nearer than the stem, so the distance used is too long

In a broad crown the highest visible point is often a branch on the near side. It is closer than the trunk, so using the distance to the trunk with that angle gives too great a height. Refraction is negligible, and percent scales are exact if used correctly.

Question 3 · medium

Why is basal area per hectare widely used to prescribe thinnings?

  1. It is unaffected by tree size, so it measures only the number of stems
  2. It is identical to stand volume, so no height measurement is needed
  3. It joins tree number and size, is quick to measure, and tracks volume and competition
  4. It is the only stand measure that stays the same after a thinning, so it is a fixed target
Answer and working

C. It joins tree number and size, is quick to measure, and tracks volume and competition

Basal area integrates number and size, can be estimated in seconds with an angle gauge, and is closely related to volume (G × height × form factor) and to competition. It does change after thinning — that is the point of using it.

Question 4 · medium

Using the quarter-girth (Hoppus) rule, what is the volume of a log 4 m long with a mid-girth of 120 cm?

  1. 0.458 m³
  2. 0.360 m³
  3. 5.76 m³
  4. 0.090 m³
Answer and working

B. 0.360 m³

Hoppus: V = (G/4)² × L = (1.2/4)² × 4 = 0.09 × 4 = 0.360 m³. The true Huber volume from the same girth is G²L/(4π) = 0.458 m³; the Hoppus figure is π/4 of it, a built-in allowance for squaring. Omitting L gives 0.090.

Question 5 · medium

A tree has a stem volume of 0.90 m³, dbh 35 cm and total height 22 m. What is its breast-height form factor?

  1. 0.425
  2. 2.35
  3. 0.0425
  4. 0.106
Answer and working

A. 0.425

f = V / (g × h) = 0.90 / (0.09621 × 22) = 0.90 / 2.1166 = 0.425. Inverting gives 2.35; using π r² with r = 0.35 m gives 0.106.

Question 6 · hard

A local volume table built in one forest division is applied to a plantation of the same species elsewhere where trees of a given diameter are much taller. The likely result is:

  1. A biased estimate, since local tables carry their own height-diameter relationship
  2. An unbiased estimate, because diameter alone fully determines volume
  3. An overestimate, because local tables always assume taller trees
  4. No effect, because local tables include a height correction
Answer and working

A. A biased estimate, since local tables carry their own height-diameter relationship

A one-entry table bakes in the construction stands' heights. Where trees are taller at the same diameter, it will underestimate volume; where shorter, overestimate. A two-entry (general) table or a local table rebuilt from a local height-diameter curve avoids this.

Question 7 · easy

Above-ground biomass of a stand is 100 t/ha and the root-to-shoot ratio is 0.24. What is the total (above- plus below-ground) biomass?

  1. 24 t/ha
  2. 76 t/ha
  3. 416.7 t/ha
  4. 124 t/ha
Answer and working

D. 124 t/ha

Below-ground biomass = 100 × 0.24 = 24 t/ha; total = 124 t/ha. Subtracting gives 76; dividing by the ratio gives 416.7.

Question 8 · medium

In stem analysis of a 30-year-old tree, the disc cut at 3.3 m has 24 rings. At approximately what age did the tree reach 3.3 m?

  1. 24 years
  2. 4 years
  3. 6 years
  4. 26 years
Answer and working

C. 6 years

The rings on a disc record the years since the stem reached that height, so age at that height = tree age − rings = 30 − 24 = 6 years (before any within-section correction). 24 is the number of years since, not the age at which.

Question 9 · medium

Which method detects false and missing rings when ageing trees from ring counts?

  1. Counting branch whorls on the upper stem, which works for all broadleaved trees
  2. Measuring bark thickness at several heights on the same stem
  3. Cross-dating, matching patterns of wide and narrow rings among trees
  4. Applying a site-index curve to the tree's present total height
Answer and working

C. Cross-dating, matching patterns of wide and narrow rings among trees

Cross-dating aligns distinctive sequences of narrow and wide rings among many trees from the same area, revealing where a ring is extra or absent. It is the basic tool of dendrochronology.

Question 10 · medium

A tree's volume rose from 0.80 m³ to 1.00 m³ in 5 years. What is its volume increment percent by Pressler's formula, p = (200/n)(V2 − V1)/(V2 + V1)?

  1. 4.56%
  2. 5.00%
  3. 4.44%
  4. 4.00%
Answer and working

C. 4.44%

Pressler: p = (200/5) × (0.20/1.80) = 40 × 0.1111 = 4.44%. The compound-interest formula gives 4.56%; simple interest on the initial volume gives 5.00% and on the final volume 4.00%. The stem names Pressler, so only 4.44% is correct.

A study plan for Forest Mensuration in Indian Forest Service Examination

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (52% of the 27 questions): Growth and increment: CAI, MAI and their relationship (4, 15%); Angle-count (Bitterlich) sampling and relascopes (3, 11%); Site index and site quality curves (3, 11%); Age determination and stem analysis (2, 7%); Diameter and girth measurement: breast height conventions, calipers, tapes (2, 7%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Height measurement: principles and hypsometers (2, 7%); Log volume formulas: Huber, Smalian, Newton (2, 7%); Tree biomass and allometric equations (2, 7%); Volume of standing trees: form factor and form quotient (2, 7%); Volume tables: local, general and form-class; construction and use (2, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Bark thickness and crown measurements (1, 4%); Basal area and its uses (1, 4%); Stand measurement: stems per hectare, basal area, top height, stand volume (1, 4%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Angle-count (Bitterlich) sampling and relascopes (3 hard of 3), Volume tables: local, general and form-class; construction and use (2 hard of 2), Growth and increment: CAI, MAI and their relationship (2 hard of 4).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Tree biomass and allometric equations (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — Indian Forest Service Examination Forest Mensuration

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.