Indian Forest Service Examination Forest Operations, Harvesting & Forest Engineering: practice questions
Indian Forest Service Examination (IFoS) — Forestry optional · India · Union Public Service Commission
Original practice questions written to the published syllabus · not past papers
10worked here, free
41written to this exam in this subject
12syllabus units
About Indian Forest Service Examination
Indian Forest Service Examination (IFoS) — Forestry optional is a government recruitment exam run by Union Public Service Commission, for candidates in India. Three stages: the Civil Services (Preliminary) Examination as a screening test; a written Main examination of six conventional papers (General English 300, General Knowledge 300, and two optional subjects of two papers each at 200 marks, 1,400 in all); and a 300-mark personality test.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.
Forest Operations, Harvesting & Forest Engineering in Indian Forest Service Examination
Getting wood from stump to mill safely and with least damage: harvest planning, felling and extraction systems, forest roads, transport, ergonomics and reduced-impact logging. The Agricultural Engineering track (aquacultural-forest-engineering) introduces roads and logging machinery in a few units; this subject treats forest operations in full.
Our 41 Indian Forest Service Examination questions in this subject: 5 easy, 23 medium, 13 hard, across 12 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to Indian Forest Service Examination and are not shown on any other exam's page.
Question 1 · medium
The chain brake on a chainsaw is activated by:
Pulling the starter cord twice quickly
Releasing the choke
Opening the fuel cap
The front hand guard or inertia
Answer and working
D. The front hand guard or inertia
It stops the chain within a fraction of a second.
Question 2 · medium
In a skyline system, logs are carried by:
A carriage running on a cable
A truck running on a parallel forest road
A forwarder bunk
An elephant harness
Answer and working
A. A carriage running on a cable
The skyline is stretched between tower and tailhold.
Question 3 · medium
A cable skidder brings logs to itself using:
Chokers and a winch cable
A hydraulic grapple only, with no cable
A crane and bunk
A conveyor belt
Answer and working
A. Chokers and a winch cable
Grapple skidders pick up bunches directly.
Question 4 · medium
A soil benefit of cut-to-length harvesting is that:
All branches are removed from the site for burning
No machines enter the stand
Logs are dragged on bare soil
Branches form brush mats on machine trails
Answer and working
D. Branches form brush mats on machine trails
Brush mats spread load and return nutrients.
Question 5 · hard
Whole-tree systems can supply energy markets because they:
Residues pile up at the landing
They leave all residues spread in the stand
They burn residues at each stump
They produce no residues at all
Answer and working
A. Residues pile up at the landing
Residue at landings is easy to chip.
Question 6 · medium
An outsloped road surface sheds water:
Towards the downhill side
Towards an uphill ditch on the inside
Towards the centre
Into the nearest stream
Answer and working
A. Towards the downhill side
Insloped roads drain to an uphill ditch.
Question 7 · hard
Full-bench road construction on steep slopes means:
Placing all material as fill on the downhill side
Building the road on piles over the slope
Paving the surface with concrete slabs
Cutting the full width into the slope
Answer and working
D. Cutting the full width into the slope
It avoids unstable sidecast fill.
Question 8 · medium
In India, round timber has traditionally been measured by:
Mid-girth and length
Weight on a weighbridge only
Top diameter only
Number of rings
Answer and working
A. Mid-girth and length
Volume by the quarter-girth (Hoppus) rule or true volume.
Question 9 · medium
Hammer marks on logs in Indian depots are used to:
Measure the moisture content of logs
Test for decay
Treat logs
Mark property and identify lots
Answer and working
D. Mark property and identify lots
They identify ownership and legality.
Question 10 · easy
Culverts at stream crossings must be sized mainly for:
The average dry-season flow
The design flood and debris
The width of the road only
The colour of the water
Answer and working
B. The design flood and debris
Undersized culverts block and wash out.
A study plan for Forest Operations, Harvesting & Forest Engineering in Indian Forest Service Examination
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (39% of the 41 questions): Ergonomics and occupational safety in forest work (4, 10%); Extraction: skidding, forwarding, cable logging, animal and aerial extraction (4, 10%); Felling: manual, motor-manual and mechanised; directional felling (4, 10%); Forest road planning, location and grades (4, 10%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Harvesting systems: cut-to-length and whole-tree (4, 10%); Reduced-impact logging and soil protection (4, 10%); Chainsaw use and safety (3, 7%); Forest bridges and simple structures (3, 7%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Log scaling, sorting and landing operations (3, 7%); Road construction, drainage and maintenance (3, 7%); Timber transport: road, water, rail (3, 7%); Harvest planning and layout (2, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Felling: manual, motor-manual and mechanised; directional felling (2 hard of 4), Harvest planning and layout (1 hard of 2), Chainsaw use and safety (1 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Harvest planning and layout (1 easy of 2); Forest bridges and simple structures (1 easy of 3).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.