LAISHA
Open Laisha

ICAR AICE-JRF/SRF Forest Operations, Harvesting & Forest Engineering: practice questions

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
40written to this exam in this subject
12syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Forest Operations, Harvesting & Forest Engineering in ICAR AICE-JRF/SRF

MCQs on logging and ergonomics: felling, extraction, safety and harvesting systems.

Getting wood from stump to mill safely and with least damage: harvest planning, felling and extraction systems, forest roads, transport, ergonomics and reduced-impact logging. The Agricultural Engineering track (aquacultural-forest-engineering) introduces roads and logging machinery in a few units; this subject treats forest operations in full.

Our 40 ICAR AICE-JRF/SRF questions in this subject: 1 easy, 12 medium, 27 hard, across 12 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

Why should skid trails be planned before harvest rather than chosen by operators as they go?

  1. Operators always choose the shortest and best routes on their own
  2. Planned trails increase residual stand damage
  3. It cuts soil damage and cost
  4. Trail planning is required only for helicopter logging
Answer and working

C. It cuts soil damage and cost

Planned trails concentrate traffic on fewer, well-placed routes.

Question 2 · medium

A commonly taught hinge thickness is about:

  1. Half of the stump diameter
  2. One-hundredth of the stump diameter
  3. Equal to the full stump diameter
  4. One-tenth of the stump diameter
Answer and working

D. One-tenth of the stump diameter

Too thin a hinge loses control; too thick a hinge resists falling.

Question 3 · hard

A 'barber chair' in felling is:

  1. A seat used by chainsaw operators
  2. A stump cut exactly at ground level
  3. A type of notch
  4. A vertical split of a leaning tree
Answer and working

D. A vertical split of a leaning tree

Slow back cuts in leaning trees allow the stem to split; boring cuts reduce the risk.

Question 4 · medium

Chainsaw protective trousers work by:

  1. Hard steel plates that deflect the chain
  2. Long fibres that clog and stop the chain
  3. Thick leather that the chain cannot cut
  4. Reflective strips that warn others
Answer and working

B. Long fibres that clog and stop the chain

The fibres are pulled into the drive sprocket and jam the chain.

Question 5 · hard

Helicopter logging is used mainly for:

  1. Cheap pulpwood on flat, accessible ground
  2. High-value timber in inaccessible or sensitive areas
  3. Fuelwood near villages
  4. Nursery stock
Answer and working

B. High-value timber in inaccessible or sensitive areas

Its high cost limits it to special cases.

Question 6 · medium

With parallel roads 400 m apart and logs extracted to both sides, the average extraction distance is about:

  1. 400 m
  2. 200 m
  3. 50 m
  4. 100 m
Answer and working

D. 100 m

Average two-sided extraction distance ≈ spacing ÷ 4.

Question 7 · medium

A planned road must climb 20 m. At a maximum grade of 8%, what is the minimum horizontal length?

  1. 160 m
  2. 2.5 m
  3. 1600 m
  4. 250 m
Answer and working

D. 250 m

Length = rise ÷ grade = 20 ÷ 0.08 = 250 m.

Question 8 · hard

Very flat road grades (below about 2%) are a problem mainly because they:

  1. Are too steep for trucks
  2. Drain poorly
  3. Cause brake failure
  4. Increase fuel use downhill
Answer and working

B. Drain poorly

Water collects on flat surfaces and ditches.

Question 9 · hard

Overloading log trucks is harmful mainly because it:

  1. Reduces fuel use per tonne carried, saving money
  2. Improves braking
  3. Damages roads and bridges and causes accidents
  4. Lowers transport cost per tonne without risk
Answer and working

C. Damages roads and bridges and causes accidents

Legal axle and gross weight limits protect infrastructure and safety.

Question 10 · hard

Emergency plans for remote forest sites must include:

  1. Only a list of tree species in the area
  2. Only timber prices
  3. Only road maps for trucks
  4. Evacuation of injured workers and communication
Answer and working

D. Evacuation of injured workers and communication

Remote sites delay medical help.

A study plan for Forest Operations, Harvesting & Forest Engineering in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (40% of the 40 questions): Forest road planning, location and grades (5, 13%); Extraction: skidding, forwarding, cable logging, animal and aerial extraction (4, 10%); Felling: manual, motor-manual and mechanised; directional felling (4, 10%); Chainsaw use and safety (3, 8%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Ergonomics and occupational safety in forest work (3, 8%); Forest bridges and simple structures (3, 8%); Harvest planning and layout (3, 8%); Harvesting systems: cut-to-length and whole-tree (3, 8%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Log scaling, sorting and landing operations (3, 8%); Reduced-impact logging and soil protection (3, 8%); Road construction, drainage and maintenance (3, 8%); Timber transport: road, water, rail (3, 8%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Extraction: skidding, forwarding, cable logging, animal and aerial extraction (3 hard of 4), Felling: manual, motor-manual and mechanised; directional felling (3 hard of 4), Chainsaw use and safety (2 hard of 3).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Reduced-impact logging and soil protection (1 easy of 3).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Forest Operations, Harvesting & Forest Engineering

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.