LAISHA
Open Laisha

ICAR AICE-JRF/SRF Forest Management & Yield Regulation: practice questions

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR

Original practice questions written to the published syllabus · not past papers
10worked here, free
27written to this exam in this subject
11syllabus units

About ICAR AICE-JRF/SRF

ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.

Source: icar.org.in.

Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.

Forest Management & Yield Regulation in ICAR AICE-JRF/SRF

MCQs on sustained yield, normal forest, rotation, estimation of growing stock, density and site quality, regulation of yield by area, volume, increment and number of trees, working plan and joint forest management, and economic criteria (IRR, NPV, cost-benefit).

Organising a forest to meet objectives over time: sustained yield, the normal forest, rotation, growing stock and the methods for regulating the cut in even-aged and uneven-aged forests.

Our 27 ICAR AICE-JRF/SRF questions in this subject: 6 easy, 9 medium, 12 hard, across 11 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.

Question 1 · medium

A normal forest of 1500 ha has a mean annual increment at rotation of 4 m³/ha/yr. What is its normal annual yield?

  1. 375 m³
  2. 1500 m³
  3. 6000 m³
  4. 3000 m³
Answer and working

C. 6000 m³

Normal yield = A × MAI at rotation = 1500 × 4 = 6000 m³ a year: in a normal forest annual yield equals annual increment. 375 divides instead of multiplying.

Question 2 · medium

Shortening the felling cycle in a selection forest generally means:

  1. Heavier, less frequent fellings in each coupe
  2. No change in felling intensity in each coupe
  3. Lighter, more frequent fellings in each coupe
  4. Fellings only in years with high timber prices
Answer and working

C. Lighter, more frequent fellings in each coupe

Yield per felling is roughly the increment accumulated since the last one; a shorter cycle accumulates less, so fellings are lighter but more frequent.

Question 3 · hard

A disadvantage of a very long felling cycle in a selection forest is that:

  1. Harvesting costs per cubic metre rise sharply because volumes are small
  2. Regeneration of shade-tolerant species becomes impossible under any canopy
  3. Trees can no longer reach the exploitable diameter between fellings
  4. Each felling becomes heavy, opening the canopy more than the system intends
Answer and working

D. Each felling becomes heavy, opening the canopy more than the system intends

Long cycles concentrate much increment into each felling, so interventions are heavy and can disrupt the uneven-aged structure. Costs per unit tend to fall with larger volumes.

Question 4 · hard

A major weakness shared by the classical volume formulas is that they:

  1. Cannot be applied without a linear-programming computer model for each working circle
  2. Depend on accurate growing-stock and increment estimates and ignore where the cut is taken
  3. Always produce yields higher than increment in every forest they are used in
  4. Apply only to plantations of exotic species with known yield tables
Answer and working

B. Depend on accurate growing-stock and increment estimates and ignore where the cut is taken

Formula yields are only as good as their inputs and say nothing about spatial distribution or stand selection; they are now used mainly as checks.

Question 5 · medium

The check method (méthode du contrôle), developed by Gurnaud and Biolley, regulates the cut in selection forests by:

  1. Felling a fixed area each year in strict rotation, roughly equal in size
  2. Applying Von Mantel's formula to the oldest trees only
  3. Repeated full inventories of growing stock and increment, cutting roughly the measured increment
  4. Clear felling whenever the stock exceeds normal
Answer and working

C. Repeated full inventories of growing stock and increment, cutting roughly the measured increment

The check method measures growing stock and increment repeatedly in each compartment and adjusts the cut and structure; it led to modern continuous-cover management.

Question 6 · easy

In a BDq-managed stand, the yield taken over a felling cycle is approximately:

  1. The entire basal area above the maximum diameter plus all small trees
  2. The growth of the stand back up to its pre-harvest structure
  3. Half the stand basal area, whatever the target structure
  4. The volume of trees below the exploitable diameter
Answer and working

B. The growth of the stand back up to its pre-harvest structure

The stand is cut back to the residual target and grows back over the cycle; the surplus above target is the yield.

Question 7 · hard

Why is area control by age class not possible in a true selection forest?

  1. Trees of all ages grow intermixed on the same ground
  2. Selection forests are too small to divide into coupes
  3. Selection forests have no measurable increment at all
  4. Selection forests are always on slopes too steep to map
Answer and working

A. Trees of all ages grow intermixed on the same ground

Age classes are not separate areas, so yield is regulated through the felling cycle with diameter, number or structure rules.

Question 8 · easy

In Johnson and Scheurman's Model I formulation, each decision variable is:

  1. The area regenerated in one period and harvested in a later one, pooled across stands
  2. The price of timber in a given period of the planning horizon
  3. The area of an initial stand assigned to a complete regime over the horizon
  4. The volume of increment in each age class in each year
Answer and working

C. The area of an initial stand assigned to a complete regime over the horizon

Model I uses whole-regime variables per initial stand; Model II uses regeneration-to-harvest variables with pooling.

Question 9 · medium

The Montréal Process is:

  1. A criteria-and-indicators process for temperate and boreal forests
  2. A treaty banning international trade in all tropical timber species
  3. A method of yield regulation for selection forests
  4. A certification label for wood products
Answer and working

A. A criteria-and-indicators process for temperate and boreal forests

The Montréal Process defines criteria and indicators for sustainable forest management in temperate and boreal countries; ITTO and Forest Europe have parallel sets.

Question 10 · hard

How does joint or community forest management typically change yield regulation?

  1. It removes the need for any sustained-yield calculation in the forest
  2. It requires clear felling of all degraded forest within one year
  3. It replaces all local uses with industrial timber production
  4. Objectives shift to local needs such as fuelwood and fodder, and planning becomes participatory
Answer and working

D. Objectives shift to local needs such as fuelwood and fodder, and planning becomes participatory

Sharing management changes objectives and uses participatory microplans; sustained yield must be reconciled with local needs and rights.

A study plan for Forest Management & Yield Regulation in ICAR AICE-JRF/SRF

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (48% of the 27 questions): Yield regulation by volume and increment (e.g. Von Mantel, Hufnagl, Austrian formula) (4, 15%); Harvest scheduling and optimisation (linear programming) (3, 11%); Multiple-use and ecosystem management (3, 11%); Yield regulation in uneven-aged forests by number of trees and diameter limits (3, 11%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Growing stock, density and normal growing stock (2, 7%); Increment and the felling cycle (2, 7%); Management of even-aged and uneven-aged forests (2, 7%); Objectives and principles of forest management (2, 7%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Rotation: physical, silvicultural, technical, financial, maximum volume (2, 7%); Sustained yield and the normal forest (2, 7%); Yield regulation by area (2, 7%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Multiple-use and ecosystem management (2 hard of 3), Growing stock, density and normal growing stock (1 hard of 2), Increment and the felling cycle (1 hard of 2).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Growing stock, density and normal growing stock (1 easy of 2); Objectives and principles of forest management (1 easy of 2).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — ICAR AICE-JRF/SRF Forest Management & Yield Regulation

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.