ICAR AICE-JRF/SRF Remote Sensing & Photogrammetry for Forestry: practice questions
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
37written to this exam in this subject
11syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Subject 59 Forestry is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based, 2 hours, 120 MCQs (Part A 20 general; Part B 50 core group; Part C 50 subject), +4 / −1, maximum 480.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Remote Sensing & Photogrammetry for Forestry in ICAR AICE-JRF/SRF
Reading the forest from above: aerial photographs and satellite images, spectral behaviour of vegetation, image classification, change detection and forest-cover monitoring.
Our 37 ICAR AICE-JRF/SRF questions in this subject: 0 easy, 17 medium, 20 hard, across 11 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
The 'red edge' in a vegetation spectrum is:
The trough in reflectance caused by water at 1.45 µm
The peak of reflectance in the green near 0.55 µm
The steep rise in reflectance from red to NIR
The fall in emitted energy beyond the thermal band
Answer and working
C. The steep rise in reflectance from red to NIR
Its position shifts to shorter wavelengths when chlorophyll falls or the plant is stressed.
Question 2 · medium
As a leaf dries, its reflectance in the shortwave infrared:
Decreases, because dry tissue absorbs more energy
Stays the same, since SWIR responds only to pigments
Becomes negative across the whole region
Increases
Answer and working
D. Increases
SWIR has water-absorption features near 1.45 and 1.94 µm; less water means more reflectance.
Question 3 · hard
Why is the relief displacement method of height measurement poorly suited to closed-canopy forest?
Tree bases are hidden
It needs a stereo pair of photos
It works only near the principal point
It needs radar
Answer and working
A. Tree bases are hidden
The displacement d is measured from base to top, so the base must be visible; parallax is preferred in closed canopy.
Question 4 · medium
An elimination (dichotomous) interpretation key:
Leads from general to specific choices
Shows example images for each class to match
Uses only colour to separate classes
Is valid for every region and season
Answer and working
A. Leads from general to specific choices
Like a botanical key; selective keys instead present examples to match.
Question 5 · hard
Photo-interpreted stand maps are most directly used in forest inventory to:
Replace all field measurements of trees
Measure DBH
Stratify field plots
Calibrate radar backscatter models
Answer and working
C. Stratify field plots
Strata of similar type, density and height reduce sampling error; see forest-inventory-sampling.
Question 6 · medium
Commission error for 'forest' is:
Mapped forest that is not forest
True forest that the map missed
The total area of forest on the map
The difference between two image dates
Answer and working
A. Mapped forest that is not forest
Commission error is the share of map 'forest' that the reference data show is not forest: the map committed it wrongly to the class. It is 1 − user's accuracy. Forest that the map missed is omission error, the complement of producer's accuracy.
Question 7 · medium
A drawback of post-classification comparison for change detection is that:
It gives no from-to information
It needs one date
Errors of both maps combine
It cannot be used with Landsat
Answer and working
C. Errors of both maps combine
It does give from-to classes, but its accuracy is limited by both classifications.
Question 8 · medium
Which polarisation is generally most sensitive to forest biomass?
VV only
Circular polarisation at X-band
Like-polarised HH at C-band
Cross-polarised HV
Answer and working
D. Cross-polarised HV
Cross-polarised backscatter comes from volume scattering in branches and foliage.
Question 9 · hard
Flooded forests and mangroves often appear bright in L-band HH images because of:
Thermal emission from warm water
Chlorophyll fluorescence
Double-bounce scattering
Atmospheric Rayleigh scattering
Answer and working
C. Double-bounce scattering
Signals bounce between trunks and the smooth water surface back to the sensor.
Question 10 · medium
Collect Earth and SEPAL, promoted by FAO, are tools for:
Sawmill recovery calculation
Calculating sawmill recovery and conversion losses
Wildlife census
Sample-based and cloud-based forest monitoring
Answer and working
D. Sample-based and cloud-based forest monitoring
Visual interpretation of sample plots on high-resolution imagery and cloud processing.
A study plan for Remote Sensing & Photogrammetry for Forestry in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (49% of the 37 questions): Image classification: supervised and unsupervised; accuracy assessment (5, 14%); Radar (SAR) in forestry (5, 14%); National forest-cover monitoring systems (4, 11%); Vegetation indices (NDVI and others) (4, 11%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Aerial photographs: scale, stereoscopy, parallax and tree height (3, 8%); Electromagnetic spectrum and spectral signatures of vegetation (3, 8%); Fire detection and burned-area mapping (3, 8%); Forest cover and change detection (3, 8%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Photo-interpretation keys for forest types (3, 8%); Drones (UAVs) for forest survey (2, 5%); Satellite sensors and resolutions: spatial, spectral, temporal, radiometric (2, 5%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: National forest-cover monitoring systems (3 hard of 4), Aerial photographs: scale, stereoscopy, parallax and tree height (2 hard of 3), Fire detection and burned-area mapping (2 hard of 3).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.