ICAR AICE-JRF/SRF Environmental & Agro-ecosystem Modelling: practice questions
ICAR AICE-JRF/SRF (PhD) — Environmental Sciences (subject 71) and Agricultural Meteorology (subject 60) · India · National Testing Agency for ICAR
Original practice questions written to the published syllabus · not past papers
10worked here, free
74written to this exam in this subject
10syllabus units
About ICAR AICE-JRF/SRF
ICAR AICE-JRF/SRF (PhD) — Environmental Sciences (subject 71) and Agricultural Meteorology (subject 60) is a PhD, fellowship and lectureship exam run by National Testing Agency for ICAR, for candidates in India. Computer-based MCQ paper for PhD admission and the JRF/SRF fellowship; one paper per subject. Timing and marking follow the yearly bulletin and were not re-read.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
Environmental & Agro-ecosystem Modelling in ICAR AICE-JRF/SRF
Building and using models of crops, soils, catchments and ecosystems: model types, calibration and validation, and the main open models used in sustainability research.
Our 74 ICAR AICE-JRF/SRF questions in this subject: 16 easy, 43 medium, 15 hard, across 10 units.
10 practice questions, worked
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to ICAR AICE-JRF/SRF and are not shown on any other exam's page.
Question 1 · medium
A catchment model divides the basin into sub-basins and hydrological response units (combinations of land use, soil and slope) without tracking their exact positions. It is:
Lumped
Fully distributed
Empirical and static
Semi-distributed
Answer and working
D. Semi-distributed
Hydrological response units group similar areas within sub-basins; a lumped model treats the whole basin as one unit, and a fully distributed model computes every grid cell.
Question 2 · hard
Why is a mechanistic model usually preferred over an empirical one for projecting crop yields under carbon dioxide concentrations never observed in the past?
It always fits historical yields more closely than any statistical model can
It needs fewer input data and parameters than any empirical regression model
It represents causal processes, so it can extrapolate beyond the observed data range more defensibly
It produces no uncertainty because its equations are derived from physical laws
Answer and working
C. It represents causal processes, so it can extrapolate beyond the observed data range more defensibly
Empirical relations hold only within the data used to fit them. Mechanistic models are not necessarily more accurate historically and need more data; their parameters are uncertain too.
Question 3 · medium
A fish stock follows logistic growth with r = 0.4 per year and K = 20,000 t. What is the maximum sustainable yield in this simple model?
8,000 t per year
10,000 t per year
2,000 t per year
4,000 t per year
Answer and working
C. 2,000 t per year
MSY = rK/4 = 0.4 × 20,000 / 4 = 2,000 t, taken at N = K/2. 8,000 = rK omits the 1/4; 10,000 is K/2, the stock size, not the yield.
Question 4 · medium
The dominant eigenvalue of a Leslie matrix for a threatened species is 0.94. This means the population is:
Declining by about 6% per time step in the long run
Growing by about 94% per time step in the long run
Stable, because the eigenvalue is close to one
Growing by about 6% per time step in the long run
Answer and working
A. Declining by about 6% per time step in the long run
λ < 1 means decline; λ = 0.94 implies a 6% loss per step once the stable age distribution is reached.
Question 5 · medium
Decomposition has Q₁₀ = 2. By what factor does the rate change when temperature rises by 5 °C?
1.41
1.00
2.00
1.50
Answer and working
A. 1.41
Factor = Q₁₀^(ΔT/10) = 2^0.5 = 1.41. 2.00 applies to a 10 °C rise; 1.50 assumes a linear response.
Question 6 · easy
In IPCC inventory guidance, a Tier 3 method for soil carbon uses:
Global default stock-change factors applied to reference soil carbon stocks
Process models or measurement systems with fine-resolution activity data
Country-specific emission factors that replace the global default values
Expert judgement in place of activity data where models are unavailable
Answer and working
B. Process models or measurement systems with fine-resolution activity data
Tier 1 uses defaults, Tier 2 country-specific factors and Tier 3 models or measurement-based systems verified against data.
Question 7 · medium
Which method is designed for screening many parameters with relatively few model runs?
Morris elementary effects
Sobol variance decomposition
Full factorial Monte Carlo
Markov chain Monte Carlo
Answer and working
A. Morris elementary effects
Morris ranks parameters by the mean and spread of elementary effects with few runs; Sobol and MCMC need many more.
Question 8 · easy
Calibration of a model means:
Testing the model against data that were not used to set the parameters
Tuning uncertain parameters to match observations
Checking that the computer code correctly implements the equations
Changing the model structure until it reproduces any desired output
Answer and working
B. Tuning uncertain parameters to match observations
Validation uses independent data; verification checks code; arbitrary structural changes are not calibration.
Question 9 · medium
Which ensemble type samples structural uncertainty?
Multi-model ensemble of different models
Initial-condition ensemble of one model
Repeated runs of one model with the same inputs
Perturbed-input ensemble of rainfall only
Answer and working
A. Multi-model ensemble of different models
Different models embody different process representations; initial-condition ensembles sample internal variability within one structure.
Question 10 · hard
Assimilating 10 km satellite soil moisture directly into a field-scale crop model without adjustment is problematic because:
The satellite measures the top few centimetres averaged over many fields, a scale and depth mismatch
Satellite soil moisture is measured in different units that cannot be converted
Crop models cannot accept any external data while the simulation is running
Microwave soil moisture is unaffected by rainfall and so carries no information
Answer and working
A. The satellite measures the top few centimetres averaged over many fields, a scale and depth mismatch
Observation operators and bias correction are needed to relate a coarse surface retrieval to a field root-zone state.
A study plan for Environmental & Agro-ecosystem Modelling in ICAR AICE-JRF/SRF
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
First, the heavy units (49% of the 74 questions): Calibration, validation and sensitivity analysis (9, 12%); Coupling models with remote sensing and climate projections (9, 12%); Crop simulation models (9, 12%); Soil carbon and nitrogen models (9, 12%).
Read the manual chapters for these first and do every worked question you can find on them.
Then the middle band: Uncertainty propagation and ensemble modelling (9, 12%); Catchment water-quality models (7, 9%); Ecosystem service models (7, 9%); Systems analysis and model types (7, 9%).
Aim for one sitting per unit, then mixed questions across them.
Then the lighter units: Population and ecosystem models (6, 8%); Mass-balance and box models (2, 3%).
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Leave time for the hard ones: Mass-balance and box models (1 hard of 2), Catchment water-quality models (2 hard of 7), Calibration, validation and sensitivity analysis (2 hard of 9).
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Bank the easy marks: Population and ecosystem models (2 easy of 6); Systems analysis and model types (2 easy of 7).
Do these early in revision so they are fast on the day.
Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.