Sclerotinia white mould (stem rot) rots the stems, heads, pods and fruit of more than 400 broad-leaved plant species, including soybean, oilseed rape, sunflower, beans, lettuce and carrot, and can take more than half the crop in wet seasons. This guide covers the fungus (Sclerotinia sclerotiorum) and its long-lived sclerotia, the signs in flowering crops and vegetables (including lettuce drop), the life cycle and why infection starts on fallen petals at flowering, risk factors and monitoring, rotation with cereals or maize and canopy management, biological control of sclerotia, fungicides by FRAC group (7, 3, 2, 12) at early to full flowering, and look-alikes (grey mould, southern blight, charcoal rot).
Most plant diseases are specialists.
This one is not.
Sclerotinia white mould, also called stem rot, rots the stems, heads, pods and fruit of more than four hundred plant species.
Soybean, oilseed rape, sunflower, beans, peas, chickpea, lentil, lettuce, carrot, potato, tomato, cabbages, cucurbits, and many weeds.
In wet seasons, it can take more than half the crop. Seed contaminated with its black resting bodies loses value,
and stored vegetables rot.
There is one good piece of news.
Cereals and grasses are not hosts, and that is the key to controlling it.
In this video: the fungus and its resting bodies, how to recognise it, the life cycle and why flowering matters, monitoring, rotation and canopy, biological control,
fungicides by FRAC group, and the look-alikes. The advice is general and global.
The fungus is Sclerotinia sclerotiorum.
Its secret is the sclerotium: a hard, black, irregular resting body, about two to twenty millimetres long, white inside.
Sclerotia form on and inside infected stems,
and fall to the soil at harvest.
In soil, they survive for about three to eight years. That is why one bad season can leave a field infested for many crops to come.
It is found worldwide, and is most damaging in cool, humid temperate regions, and in irrigated or high-altitude crops in warmer regions.
It is major in oilseed rape, soybean, sunflower and beans in Europe and North America, in soybean in Brazil, and in oilseed rape in China.
In flowering crops such as soybean, beans and oilseed rape, the first signs are water-soaked lesions on stems and branches,
often starting at the nodes, where fallen petals have lodged.
The lesions turn pale or bleached.
As it advances, white, cottony mould covers stems and pods in humid conditions.
Stems become shredded and bleached, branches wilt and die,
and when you split a hollow stem, you find black sclerotia inside.
Splitting stems is the quickest way to confirm it.
In other crops, it looks different.
Lettuce plants suddenly collapse, which growers call lettuce drop.
Sunflower heads rot, and stem bases wilt.
And carrots and cabbages rot in the field, or later in storage, with white mould and sclerotia.
After a spell of cool, moist conditions, sclerotia near the soil surface sprout tiny, tan, cup-shaped mushrooms, two to ten millimetres across, called apothecia. Over several weeks, they release spores into the air. This needs moist soil under a closed canopy.
Here is the clever part. The spores cannot attack healthy tissue directly.
They need dead or dying tissue to start, and fallen petals are perfect.
A petal lodged on a stem or leaf, wet for a long time, becomes the base from which the fungus invades the healthy plant. That is why the disease starts at flowering.
Sclerotia can also infect roots and stem bases directly.
The disease is most severe at cool to moderate temperatures,
about fifteen to twenty-five degrees Celsius, with frequent rain, dew or irrigation during flowering.
New sclerotia form in the infected plants, and return to the soil at harvest. Usually there is one main cycle per crop.
What raises the risk?
Growing susceptible crops too often in the rotation.
Dense canopies and narrow rows that keep the soil surface moist.
Rain or irrigation during flowering.
And lots of sclerotia left by previous crops.
There is no numeric economic threshold.
Spray decisions use the field's history, the crop stage,
canopy closure and weather-based risk models, which differ between crops and regions, and may not work outside the place they were built for.
So monitor.
In fields with a history of white mould, look for the little cups on the soil under the canopy, from just before flowering.
Inspect stems and nodes for water-soaked or bleached lesions at and after flowering.
And use local risk forecasts where they exist.
Because cereals and grasses are not hosts, rotation is your strongest tool.
Rotate with non-host crops, such as cereals or maize, for several years, and avoid planting susceptible crops one after another.
Remember that oilseed rape, soybean, sunflower, beans and many vegetables all feed the same fungus.
Open the canopy.
Use wider rows or lower plant densities, so the soil surface dries. Avoid irrigating during flowering where you can.
Plant clean seed, free of sclerotia.
And control broad-leaved weeds, which are hosts too.
Deep ploughing buries sclerotia below the depth at which they form their cups, but later tillage can bring them back up.
Varieties differ in susceptibility, often because of plant shape and flowering time, but fully resistant varieties are not available.
White mould has a natural enemy.
The fungus Coniothyrium minitans, applied to soil or crop residue,
parasitises and destroys sclerotia, attacking the disease at its source.
Bacillus and Trichoderma products also give partial control.
Biological control works best as part of a plan:
rotation to stop adding sclerotia, a biological product to reduce the ones already there, and an open canopy to keep the remaining spores from finding wet petals.
Fungicides protect petals and stems, so they are applied at early to full flowering.
Timing matters more than the number of sprays.
Laisha names fungicides by FRAC group.
Group seven, the SDHIs, and group three, the demethylation inhibitors, are applied at flowering.
Group two, the dicarboximides, are also used, but resistance has been reported in some regions.
And group twelve, the phenylpyrroles, is often used in mixtures.
To slow resistance, mix or alternate groups with different modes of action,
and combine them with rotation and canopy management. Use only products registered for your crop in your country, at the label dose.
Read the label, wear what it asks for, protect bees, which forage on flowering crops, and respect the pre-harvest interval.
Let's put it together as a season plan, for a field with a history of white mould.
Before sowing: check the rotation, and if a susceptible crop grew there in recent years, choose a cereal or maize instead.
Treat the residue or soil with a biological product that attacks sclerotia.
Buy clean seed, free of sclerotia.
At sowing: choose wider rows or a lower plant density, so the canopy stays open and the soil surface dries.
Before flowering: walk the field and look under the canopy for the little tan cups. Check the local risk forecast if there is one.
At flowering: if cups are present, the canopy is closed and the weather is cool and wet, this is the moment to protect the crop, by FRAC group, at early to full flowering.
Don't irrigate during flowering if you can avoid it.
And at harvest: split stems to see how much disease there was, and note it for the field's history.
Remember that new sclerotia are going back into the soil,
and that how long they persist varies with soil and climate.
Three diseases are often confused with white mould.
Grey mould has grey, fuzzy spore masses rather than white, cottony mould, and small or no sclerotia.
Southern blight forms a white, fan-shaped mould at the stem base in hot weather, with small, round, tan to brown sclerotia, like mustard seeds.
And charcoal rot gives a grey discolouration of the lower stem, with tiny black dots, in hot, dry weather.
White mould is the cool, wet one, with white cotton and large black sclerotia.
To recap.
Sclerotinia white mould attacks more than four hundred broad-leaved crops and weeds, but not cereals or grasses. Its black sclerotia survive three to eight years in soil,
and in cool, wet weather sprout little cups whose spores infect through fallen petals at flowering.
Look for bleached stem lesions, white cotton and sclerotia inside stems. Rotate with cereals or maize for several years, open the canopy, avoid irrigating at flowering, sow clean seed, and control weeds. Use biological control on sclerotia.
And if you spray, do it at early to full flowering, by FRAC group, following the label.
For every pest and disease, visit laisha.ai. Thank you for watching.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
An AI operating system for agriculture: free guides, manuals and tools written for every country.