India · IITs (JoSAA counselling) · secondary source
JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering is a university entrance exam run by IITs (JoSAA counselling), for candidates in India.
JEE Main, then JEE Advanced, then JoSAA counselling.
We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose.
Check the current format, eligibility, fees and dates on the official site: krishijagran.com.
IIT Kharagpur is reported as the only IIT with an Agricultural & Food Engineering department. Details come from a news/blog source because iitkgp.ac.in reset the connection during research.
Our reading of the syllabus, from the questions we have written to this exam; the exam body's own weighting, where published, is under Format above.
Start here: read these subjects' manuals first and work their questions until the reasoning is automatic.
One pass per subject, then mixed sets across them.
Definitions, classifications and standard figures; quick to revise, easy marks to lose.
Leave untimed time for these and read every explanation, including for the options you rejected.
Official source: krishijagran.com
Original questions written to this exam's published syllabus and pattern. Not past papers.
1. A farm wants a mulch film that can be left in the field to biodegrade in the soil. Which description is correct?
C. Films certified soil-biodegradable, such as under EN 17033, are designed for this
Soil-biodegradable mulch films (often PBAT and PLA or starch blends) are certified against standards such as EN 17033 that test biodegradation in soil. Oxo-degradable films fragment rather than fully biodegrade; ordinary polyethylene persists; many PLA products are compostable only at industrial-compost temperatures.
Engineering Physics & Chemistry · Polymers and plastics used in agriculture
2. A sinusoidal supply has a peak value of 325 V. What is its RMS value?
D. 230 V
V_rms = V_m/√2 = 325/1.414 = 230 V — the familiar 230 V supply. 207 V is the half-cycle average 2V_m/π; 460 V multiplies instead of dividing; 162 V halves the peak, which has no meaning for a sine wave.
Basic Electrical & Electronics Engineering · AC circuits, phasors and power factor
3. Rubber silage-clamp sheeting is flexible in summer but becomes brittle in a hard winter. Which polymer property explains this?
B. Glass-transition temperature
Below its glass-transition temperature an amorphous polymer or elastomer loses chain mobility and becomes hard and glassy. Melting applies to crystalline regions at much higher temperatures; polydispersity describes molar-mass spread.
Engineering Physics & Chemistry · Polymers and plastics used in agriculture
4. A dairy plant softens 10,000 L/day by the lime–soda process. The raw water contains, as mg/L CaCO3: Ca(HCO3)2 50, Mg(HCO3)2 50, MgCl2 100 and CaSO4 100. Using lime = 0.74 × [temp Ca + 2 temp Mg + perm Mg] (mg/L as CaCO3) with pure lime, how much lime is needed per day?
A. 1.85 kg
Lime = 0.74 × (50 + 2 × 50 + 100) = 0.74 × 250 = 185 mg/L; × 10,000 L = 1.85 kg/day. Counting Mg(HCO3)2 once gives 1.48 kg; adding CaSO4 (which needs soda, not lime) gives 2.59 kg; using 1.06 (soda's factor) gives 2.65 kg.
Engineering Physics & Chemistry · Water chemistry: hardness, pH and treatment
5. Why are NAND and NOR called universal gates?
C. Every logic function is realisable with either type alone
NOT, AND and OR can each be made from NAND gates only (or NOR gates only), so any Boolean function can be built. Universality is a logical property, not a speed or logic-family property.
Basic Electrical & Electronics Engineering · Digital logic
6. A 2.5 m³ rigid tank holds 3 kg of air. The specific volume of the air is
B. 0.833 m³/kg
v = V/m = 2.5/3 = 0.833 m³/kg. 1.20 is the density (m/V) given the wrong unit, 7.50 multiplies volume by mass, and 0.120 is a misplaced decimal of the density.
Engineering Thermodynamics · Systems, properties and the zeroth law
7. A spray-drone operator compares lithium-ion and lead–acid batteries. Which statement is correct?
B. Lithium-ion stores much more energy per kg but needs a battery management system
Lithium-ion cells (about 3.6–3.7 V nominal for common chemistries) offer several times the specific energy of lead–acid and tolerate deep cycling, which is why drones use them, but they need a battery management system against overcharge, over-discharge and overheating. 2.0 V per cell is lead–acid.
Engineering Physics & Chemistry · Electrochemistry and batteries
8. A load P applied suddenly (with no initial velocity) to a bar of area A produces a maximum stress of:
C. 2P/A
The load does work Pδ while the bar stores ½σAδ; equating gives σ = 2P/A, twice the gradually applied value.
Strength of Materials · Strain energy
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.