LAISHA
Open Laisha

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering Engineering Physics & Chemistry: practice questions

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering · India · IITs (JoSAA counselling)

Original practice questions written to the published syllabus · not past papers
10worked here, free
89written to this exam in this subject
8syllabus units

About JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering is a university entrance exam run by IITs (JoSAA counselling), for candidates in India. JEE Main, then JEE Advanced, then JoSAA counselling.

Official site: krishijagran.com.

We have not been able to confirm these details against the exam body's own specification, so fees, dates and pass marks are left out on purpose. Check the current format, eligibility, fees and dates on the official site.

Engineering Physics & Chemistry in JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

The physics and chemistry behind materials, water, fuels and electronics that later engineering subjects assume.

Our 89 JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering questions in this subject: 29 easy, 39 medium, 21 hard, across 8 units.

10 practice questions, worked

Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.

These 10 were written to JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering and are not shown on any other exam's page.

Question 1 · medium

A tractor cab measures 90 dB at the operator's ear and a quieter model measures 85 dB under the same test. By what factor does the sound intensity at the ear of the louder cab exceed that of the quieter one?

  1. About 5.00 times
  2. About 1.06 times
  3. About 3.16 times
  4. About 1.78 times
Answer and working

C. About 3.16 times

L2 − L1 = 10 log10(I2/I1), so I2/I1 = 10^(5/10) = 3.16. 1.06 is simply 90/85, which ignores the logarithmic scale; 5.00 treats decibels as linear; 1.78 is 10^(5/20), the ratio for sound pressure, not intensity.

Question 2 · easy

A 50 mL water sample, buffered to pH 10 with Eriochrome Black T, needs 12.0 mL of 0.01 M EDTA to reach the end point. What is its total hardness?

  1. 24 mg/L as CaCO3
  2. 240 mg/L as CaCO3
  3. 480 mg/L as CaCO3
  4. 120 mg/L as CaCO3
Answer and working

B. 240 mg/L as CaCO3

Hardness = V × M × 100,000/V_sample = 12.0 × 0.01 × 100,000/50 = 240 mg/L as CaCO3 (1 mol EDTA ≡ 1 mol CaCO3 = 100 g). Using 50 instead of 100 g/mol (an equivalent-weight slip) halves it to 120; 480 doubles it.

Question 3 · hard

A dairy plant softens 10,000 L/day by the lime–soda process. The raw water contains, as mg/L CaCO3: Ca(HCO3)2 50, Mg(HCO3)2 50, MgCl2 100 and CaSO4 100. Using lime = 0.74 × [temp Ca + 2 temp Mg + perm Mg] (mg/L as CaCO3) with pure lime, how much lime is needed per day?

  1. 1.85 kg
  2. 1.48 kg
  3. 2.65 kg
  4. 2.59 kg
Answer and working

A. 1.85 kg

Lime = 0.74 × (50 + 2 × 50 + 100) = 0.74 × 250 = 185 mg/L; × 10,000 L = 1.85 kg/day. Counting Mg(HCO3)2 once gives 1.48 kg; adding CaSO4 (which needs soda, not lime) gives 2.59 kg; using 1.06 (soda's factor) gives 2.65 kg.

Question 4 · easy

The octane number of a petrol is 91. What does this mean?

  1. It contains 91% by mass of branched octane molecules of all types
  2. It knocks like a blend of 91% n-heptane and 9% iso-octane by volume
  3. It knocks like a blend of 91% iso-octane and 9% n-heptane by volume
  4. It ignites like a blend of 91% cetane and 9% α-methylnaphthalene
Answer and working

C. It knocks like a blend of 91% iso-octane and 9% n-heptane by volume

Octane number is the volume percentage of iso-octane (rated 100) in an iso-octane/n-heptane (rated 0) blend with the same knock behaviour. Cetane and α-methylnaphthalene define the cetane scale for diesel; the number is a performance match, not the fuel's composition.

Question 5 · easy

In biodiesel production by transesterification, a vegetable oil reacts with methanol in the presence of sodium or potassium hydroxide. What are the products?

  1. Fatty-acid methyl esters and glycerol
  2. Free fatty acids and ethylene glycol
  3. Methane, carbon dioxide and water
  4. Glucose and long-chain alcohols
Answer and working

A. Fatty-acid methyl esters and glycerol

Each triglyceride reacts with three methanol molecules to give three fatty-acid methyl esters (biodiesel) and one glycerol. Methane and CO2 come from anaerobic digestion; free fatty acids are an unwanted side issue that forms soaps with the alkaline catalyst.

Question 6 · medium

Before biogas from a dung digester is used to run a stationary engine, which component is commonly scrubbed out because it corrodes engine parts?

  1. Methane
  2. Hydrogen sulphide
  3. Argon
  4. Nitrogen
Answer and working

B. Hydrogen sulphide

Biogas is mostly methane and CO2 with traces of H2S; H2S forms sulphurous and sulphuric acids that corrode metals and degrade oil, so it is removed (for example with iron-oxide scrubbers). Methane is the fuel itself.

Question 7 · easy

What does vulcanisation do to natural rubber used for tyres and milking liners?

  1. It breaks the long chains into short ones, making the rubber flow more easily
  2. It converts the cis-polyisoprene into trans form, making the rubber soft and sticky
  3. It removes all the double bonds by hydrogenation, making the rubber a hard plastic
  4. It forms sulphur cross-links between the chains, making the rubber elastic and durable
Answer and working

D. It forms sulphur cross-links between the chains, making the rubber elastic and durable

Heating with sulphur forms cross-links between polyisoprene chains, so the rubber springs back, resists heat and cold, and wears better. Raw rubber is the soft, sticky material; breaking chains (mastication) is a separate processing step.

Question 8 · medium

A farm wants a mulch film that can be left in the field to biodegrade in the soil. Which description is correct?

  1. Any film labelled oxo-degradable fully biodegrades in field soil within one season
  2. Any PLA item biodegrades in cool field soil just as quickly as in industrial compost
  3. Films certified soil-biodegradable, such as under EN 17033, are designed for this
  4. Ordinary polyethylene film biodegrades completely in soil within a few months of tillage
Answer and working

C. Films certified soil-biodegradable, such as under EN 17033, are designed for this

Soil-biodegradable mulch films (often PBAT and PLA or starch blends) are certified against standards such as EN 17033 that test biodegradation in soil. Oxo-degradable films fragment rather than fully biodegrade; ordinary polyethylene persists; many PLA products are compostable only at industrial-compost temperatures.

Question 9 · medium

Rubber silage-clamp sheeting is flexible in summer but becomes brittle in a hard winter. Which polymer property explains this?

  1. Degree of crystallinity
  2. Glass-transition temperature
  3. Polydispersity index
  4. Melting point
Answer and working

B. Glass-transition temperature

Below its glass-transition temperature an amorphous polymer or elastomer loses chain mobility and becomes hard and glassy. Melting applies to crystalline regions at much higher temperatures; polydispersity describes molar-mass spread.

Question 10 · medium

A spray-drone operator compares lithium-ion and lead–acid batteries. Which statement is correct?

  1. Lithium-ion batteries cannot be deeply discharged, unlike lead–acid ones
  2. Lithium-ion stores much more energy per kg but needs a battery management system
  3. Lithium-ion cells give 2.0 V each, the same as lead–acid cells
  4. Lead–acid stores much more energy per kg and needs no charge control at all
Answer and working

B. Lithium-ion stores much more energy per kg but needs a battery management system

Lithium-ion cells (about 3.6–3.7 V nominal for common chemistries) offer several times the specific energy of lead–acid and tolerate deep cycling, which is why drones use them, but they need a battery management system against overcharge, over-discharge and overheating. 2.0 V per cell is lead–acid.

A study plan for Engineering Physics & Chemistry in JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering

This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.

  1. First, the heavy units (46% of the 89 questions): Waves and optics (15, 17%); Calorific value of fuels (13, 15%); Polymers and plastics used in agriculture (13, 15%).

    Read the manual chapters for these first and do every worked question you can find on them.

  2. Then the middle band: Semiconductor physics basics (13, 15%); Electrochemistry and batteries (12, 13%); Water chemistry: hardness, pH and treatment (12, 13%).

    Aim for one sitting per unit, then mixed questions across them.

  3. Then the lighter units: Fuels and combustion chemistry (9, 10%); Corrosion and its control (2, 2%).

    Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.

  4. Leave time for the hard ones: Semiconductor physics basics (5 hard of 13), Water chemistry: hardness, pH and treatment (4 hard of 12), Fuels and combustion chemistry (3 hard of 9).

    Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.

  5. Bank the easy marks: Corrosion and its control (2 easy of 2); Water chemistry: hardness, pH and treatment (5 easy of 12).

    Do these early in revision so they are fast on the day.

  6. Finish timed. Sit the subject as a timed set without notes, mark it, and send each wrong answer back to its unit above.

Last updated · How Laisha writes and checks its pages · Report a mistake

Ask Laisha about this

Opens Laisha's chat with your question ready to send. Sign in or start free.

Unlock every question — JEE Advanced → IIT Kharagpur B.Tech Agricultural & Food Engineering Engineering Physics &

US$10 a month · one price worldwide · cancel any time

  • Every practice question in this subject, with full working
  • Timed exam papers and progress by unit
  • Ask Laisha to explain any answer — up to 1,000 questions a month
Free or Smarter
FreeSmarter
Grow guides, pest pages, articlesRead allRead all
Ask Laisha5 a dayUp to 1,000 a month
Exam practiceThe sample on each pageEvery question, timed papers
Crop calendar and pest alerts—For your own fields
Calculators and tools—All
Uploads and reports—100 a month, real files
10 days free for every new account, no card.