UGC-NET (June 2025) · India · National Testing Agency
Original practice questions written to the published syllabus · not past papersUGC-NET (June 2025) is a PhD, fellowship and lectureship exam run by National Testing Agency, for candidates in India. CBT (since Dec 2018). Paper I 50 questions / 100 marks; Paper II 100 questions / 200 marks; 180 minutes total; +2, no negative marking.
Source: ugcnet.nta.ac.in.
Checked against the exam body's published information. Formats and fees change; confirm the current edition there before you book.
What quality means for food and farm products, how it is managed and measured, and the national and international standards that govern trade.
Our 31 UGC-NET questions in this subject: 15 easy, 15 medium, 1 hard, across 5 units.
Choose an answer, then open the working. Each explanation says why the right answer is right and why the others are not.
These 10 were written to UGC-NET and are not shown on any other exam's page.
Which quality thinker defined quality as 'fitness for use'?
A. Joseph Juran
Juran's definition is fitness for use. Crosby's is conformance to requirements, the one most often confused with it; Taguchi defined poor quality as loss to society.
Philip Crosby defined quality as:
B. Conformance to requirements
Crosby: conformance to requirements. Fitness for use is Juran; loss to society is Taguchi; 'what the customer says it is' is associated with Feigenbaum.
In the ISO 9000 vocabulary, quality is defined as:
B. The degree to which a set of inherent characteristics of an object fulfils requirements
ISO 9000 defines quality as the degree to which inherent characteristics fulfil requirements (stated, implied or obligatory). It is a matter of degree, not zero defects, and requirements come from customers and law, not from the certification body.
'Quality is free' and the performance standard of 'zero defects' are associated with:
C. Philip Crosby
Crosby's four absolutes include zero defects as the performance standard and the price of nonconformance as the measure. Feigenbaum coined total quality control; Shewhart developed the control chart.
Quality circles and the cause-and-effect (fishbone) diagram were popularised by:
D. Kaoru Ishikawa
Ishikawa promoted quality circles and company-wide quality control and popularised the fishbone diagram. Taguchi is known for the loss function, Shingo for poka-yoke.
The Deming Prize was instituted in 1951 by:
C. The Union of Japanese Scientists and Engineers
JUSE created the Deming Prize in 1951. BIS instituted the Rajiv Gandhi National Quality Award; EFQM runs the European excellence model; ISO does not give quality awards.
Which list gives the seven quality management principles underlying ISO 9001:2015?
A. Customer focus, leadership, engagement of people, process approach, improvement, evidence-based decision making, relationship management
These are the seven principles in ISO 9000:2015. Zero defects is Crosby's; PDCA is a cycle, not the principles; the last list mixes cost-of-quality terms and Garvin's dimensions.
In the common high-level structure of ISO management-system standards such as ISO 9001:2015, clause 9 is:
A. Performance evaluation
The ten clauses are scope, normative references, terms, context (4), leadership (5), planning (6), support (7), operation (8), performance evaluation (9) and improvement (10).
A fruit packhouse finds 45 defects in 1,500 crates. Each crate has 4 defect opportunities (grade, weight, label, damage). What is the DPMO?
D. 7,500
DPMO = 45/(1,500 x 4) x 1,000,000 = 7,500. Ignoring opportunities gives 30,000 (a per-unit rate); 0.75 is the defect percentage; multiplying by opportunities gives 120,000.
Under the conventional 1.5-sigma shift, a six-sigma process produces about how many defects per million opportunities?
B. 3.4
3.4 DPMO assumes a 1.5-sigma drift. 0.002 DPMO is the centred six-sigma figure; 233 corresponds to 5 sigma and 66,807 to 3 sigma.
This plan follows where our questions actually fall, so the time goes where the marks are likely to be. It is our reading of the syllabus, not the exam body's weighting.
Read the manual chapters for these first and do every worked question you can find on them.
Aim for one sitting per unit, then mixed questions across them.
Learn the definitions, classifications and standard numbers; these units are more often recalled than worked.
Come back to these after a first pass, untimed, and read every explanation, including for the options you rejected.
Do these early in revision so they are fast on the day.
Last updated · How Laisha writes and checks its pages · Report a mistake
US$10 a month · one price worldwide · cancel any time
| Free | Smarter | |
|---|---|---|
| Grow guides, pest pages, articles | Read all | Read all |
| Ask Laisha | 5 a day | Up to 1,000 a month |
| Exam practice | The sample on each page | Every question, timed papers |
| Crop calendar and pest alerts | — | For your own fields |
| Calculators and tools | — | All |
| Uploads and reports | — | 100 a month, real files |
An AI operating system for agriculture: free guides, manuals and tools written for every country.